Color stability of denture shade tabs is affected by exposure to daylight and decontamination protocols

The purpose of this study was to investigate the effect of light exposure and decontamination protocols on the color stability of denture shade guide tabs. Fifty tabs for shades 62, 66, and 69 (Biotone IPN, Dentsply Sirona) were submitted to baseline L*a*b* measurements (EasyShade, Vita), separated into 5 experimental groups (n = 10), and subjected to one of the following conditions: G1–distilled water (DW‐H₂O)–control; G2 ?70% alcohol; G3–sodium hypochlorite 1% (NaClO); G4–no light exposure; G5–natural light exposure for 6 months. The experimental conditions were designed to simulate 6 months of clinical use. After the test period, final color measurements were recorded. The mean tristimulus coordinate difference (ΔL*,Δa*,Δb*) and total color difference values () were analyzed using 2‐way ANOVA and the Tukey test, α = .05. G2 (alcohol) produced less (P < .05) color change in shade 69 than G3 (NaClO). G5 (light exposure) affected the color stability for all shades, producing a statistical difference (P < .05) from G4 (no light exposure). It was concluded that natural light changes the color stability of the shade guides and that decontamination with 70% alcohol had the least impact on the color stability of the shade guide tabs.     

Freeze drying process: real time model and optimization

Freeze drying is a separation process based on the sublimation phenomenon. This process has the following advantages compared to the conventional drying process: the material structure is maintained, moisture is removed at low temperature (reduced transport rates), product stability during the storage is increased, the fast transition of the moisturized product to be dehydrated minimizes several degradation reactions. Freeze drying process has not been studied well enough. In order to put it to practice, a mathematical model based on fundamental mass and energy balance equations has been developed, based on a deterministic mathematical model proposed by Liapis and Sadikoglu [Drying Technol. 15 (3–4) (1997) 791], and used to calculate the amount of removed water and amount of residual water. The proposed model contains the freeze drying equations, which are solved by the orthogonal collocation and polynomial approximation—Jacobi method. The results show that the dynamic mathematical model represents well the process and is especially well suited for real time optimization. As a case study to illustrate the model utilization in a real time optimization procedure, the freeze drying process was optimized by the method of Successive Quadratic Programming (SQP) used for solution of non-linear equations, for skimmed milk and soluble coffee. The optimization procedure showed to be an important tool to improve the process performance since lower energy consumption and hence lower cost has been achieved to obtain the product with the same quality.     

Cytotoxic Activity and Structure–Activity Relationship of Triazole‐Containing Bis(Aryl Ether) Macrocycles

Cancer continues to be a worldwide health problem. Certain macrocyclic molecules have become attractive therapeutic alternatives for this disease because of their efficacy and, frequently, their novel mechanisms of action. Herein, we report the synthesis of a series of 20‐, 21‐, and 22‐membered macrocycles containing triazole and bis(aryl ether) moieties. The compounds were prepared by a multicomponent approach from readily available commercial substrates. Notably, some of the compounds displayed interesting cytotoxicity against cancer (PC‐3) and breast (MCF‐7) cell lines, especially those bearing an aliphatic or a trifluoromethyl substituent on the N‐phenyl moiety (IC₅₀<13 μm ). Additionally, some of the compounds were able to induce apoptosis relative to the solvent control; in particular, (Z)‐N‐cyclohexyl‐7‐oxo‐6‐[4‐(trifluoromethyl)phenyl]‐1¹H‐3,10‐dioxa‐6‐aza‐1(4,1)‐triazola‐4(1,3),9(1,4)‐dibenzenacyclotridecaphane‐5‐carboxamide ( 12 f ) was the most potent in this regard (22.7 % of apoptosis).     

Calcium phosphate substrates with emulsion-derived roughness: Processing,characterisation and interaction with human mesenchymal stem cells

Calcium phosphates (CaP) have been the subject of several studies that often lack a systematic approach to understanding how their properties affect biological response. CaP particles functionalised with a pH-responsive polymer (BCS) were used to prepare microporous substrates (porosity between 70 and 75% and pore sizes of 5–20 μm) through the aggregation of oil-in-water emulsions by controlling solid loading, emulsification energy, pH, drying and sintering conditions. The combined effect of surface roughness (roughness amplitude, R_a between 0.9–1.7 μm) and chemistry (varying Hydroxyapatite/β-Tricalcium phosphate ratio) on human mesenchymal stem cells was evaluated. HA substrates stimulated higher cell adhesion and proliferation (especially with lower R_a), but cell area increased with β-TCP content. The effect of surface roughness depended of chemistry: HA promoted higher mineralising activity when R_a ～ 1.5 μm, whereas β-TCP substrates stimulated a more osteogenic profile when R_a ～ 1.7 μm. A novel templating method to fabricate microporous CaP substrates was developed, opening possibilities for bone substitutes with controlled features.     

Polyphenolic fractions improve the oxidative stability of microencapsulated linseed oil

The main objective of this study was to evaluate the effect of incorporating polyphenolic‐enriched fractions from murta leaves on the oxidative stability of linseed oil microencapsulated by spray drying. For this purpose, polyphenol‐enriched fractions from murta leaves were separated by gel permeation chromatography and chemically characterized. The oxidative stability of microencapsulated linseed oil (MLO) with antioxidants was evaluated in storage conditions at 25°C for 40 days. The antioxidant effects of the polyphenolic fractions and commercial antioxidants (BHT and trolox) on microencapsulated oil were evaluated by the value of conjugated dienes, peroxide, and p‐anisidine. In the initiation step of the oxidation, no significant oxidation delay (p>0.05) in MLO containing fractions F₆, F₈, or BHT and trolox was observed. However, in the termination step of the oxidation, the addition of fractions F₆, F₈, and BHT and trolox decreases significantly (p ≤ 0.05) the rancidity in MLO. Furthermore, the results of this study demonstrated the importance of the addition of natural antioxidants such as fractions of murta leaf extract in microencapsulated linseed oil to increase its resistance to oxidation. Practical applications: For incorporating linseed oil, a source of omega‐3 fatty acids, in the diet it is necessary to protect it against oxidative rancidity, the main cause of deterioration that affects food with a high unsaturated fat content. Microencapsulation is effective in retarding or suppressing the oxidation of unsaturated fatty acids and natural plants extracts are effective in inhibiting the lipid oxidation of microencapsulated oil. The use of process technology and a natural additive is expected to increase storage stability and enable its use in dry foods such as instant products. Linseed oil can be used in human nutrition as well as in animal feed as a replacement for fish oil.     

Malachite green derivatives for two-photon RNA detection

The design, preparation and characterisation of a library of malachite green (MG) derivatives for two-photon RNA labelling is described. Some of these MG derivatives exhibit an increased affinity for an MG-aptamer, as well as improved two-photon sensitivity when compared to the classical malachite green chloride. The underlying mechanisms and potential benefits for in vivo RNA visualisation are discussed.     

Supercritical Fluid Extraction of Eucalyptus globulus Bark-A Promising Approach for Triterpenoid Production

Eucalyptus bark contains significant amounts of triterpenoids with demonstrated bioactivity, namely triterpenic acids and their acetyl derivatives (ursolic, betulinic, oleanolic, betulonic, 3-acetylursolic, and 3-acetyloleanolic acids). In this work, the supercritical fluid extraction (SFE) of Eucalyptus globulus deciduous bark was carried out with pure and modified carbon dioxide to recover this fraction, and the results were compared with those obtained by Soxhlet extraction with dichloromethane. The effects of pressure (100-200 bar), co-solvent (ethanol) content (0, 5 and 8% wt), and multistep operation were studied in order to evaluate the applicability of SFE for their selective and efficient production. The individual extraction curves of the main families of compounds were measured, and the extracts analyzed by GC-MS. Results pointed out the influence of pressure and the important role played by the co-solvent. Ethanol can be used with advantage, since its effect is more important than increasing pressure by several tens of bar. At 160 bar and 40 °C, the introduction of 8% (wt) of ethanol greatly improves the yield of triterpenoids more than threefold.