Retention properties of arsenate anions of water‐soluble polymers by a liquid‐phase polymer‐based retention technique

The retention properties of arsenic ions from an aqueous solution by water‐soluble cationic polymers and cationic–anionic copolymers were investigated. Poly[(3‐methacryloylamine)propyl]trimethylammonium chloride [P(ClMPTA)] and poly[(3‐methacryloylamine)propyl]trimethylammonium chloride–co–acrylic acid [P(ClMPTA‐co‐AA] were synthesized by radical polymerization. The copolymers were prepared with feed mole ratios of ClMPTA to AA of 1 : 1, 1 : 2, and 2 : 1. The copolymer compositions were evaluated by FTIR spectroscopy, TG‐DSC, and elemental analysis. The liquid‐phase polymer‐based retention (LPR) technique was used. This technique consists of retention of arsenate anions by the quaternary ammonium salt of a water‐soluble polymer in a filtration membrane cell. It was shown that the polymers could bind H₂AsO species from an aqueous solution more selectively at pHs of 6 and 8, than at a pH of 4. An increase in the polymer concentration was associated with increased retention capacity but not linearly. At the highest concentration the influence of pH was better observed. Investigation of copolymers showed the concerted action of polycations and polyanions on the ability to retain arsenic. At the lowest pH, the role of ionic strength of the media had a remarkable effect on the retention ability, independently of copolymer composition. At a pH of 6 a copolymer polycation/polyanion composition of 2 : 1 had the highest selective effect. At a pH of 8, a nonequimolar copolymer composition showed the same efficiency for the retention of arsenate species. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 2677–2684, 2006     

Dilute turbulent gas-solid flow in risers with particle-particle interactions

Earlier work of Sinclair and Jackson that treats the laminar flow of gas-solid suspensions is extended to model dilute turbulent flow. The random particle motion, often exceeding the turbulent flucutations in the gas, is obtained using a model based on the kinetic theory of granular materials. A two-equation low Reynolds number turbulence model is modified to account for the presence of the dilute particle phase. Comparisons of the model predictions with available experimental data for the mean and fluctuating velocity profiles for both phases indicate that the resulting theory captures many of the flow features observed in the pneumatic transport of large particles. THe model predictions did not manifest an exterme sensitivity to the degree of inelasticity in the particle-particle collisions for the range of solid loading ratios investigated.     

The bifurcation behavior of a polyurethane continuous stirred tank reactor

In this work the open-loop nonlinear bifurcation analysis of a continuous stirred tank reactor where polyurethane polymerization reactions take place is carried out. The effect of potential manipulated, disturbance and design variables on the reactor nonlinear behavior is addressed. Moreover, the impact of cascade feedback control on the steady-state multiplicity pattern is also discussed. It is shown that cascade control introduces new nonlinearity patterns increasing closed-loop sensitivity.     

Response of mice connective tissue to three different endodontic materials

The aim of this study was to evaluate the biocompatibility of mineral trioxide aggregate (MTA) Bio and Portland cement (PC) and compare with those of ProRoot MTA. Polyethylene tubes were filled with materials and placed into dorsal subcutaneous connective tissue of Wistar albino rats. After 7, 30, and 60 days after the surgical procedure, the implants with the surrounding tissue were removed. Tissue samples were subjected to histological processing, and sections were stained with hematoxylin and eosin. Sections were evaluated for the intensity of inflammation, predominant cell type, presence of fibrous capsule and granulation tissue. Data were submitted to Kruskal‐Wallis test at a significant level of P ≤ 0.05. No statistical differences were observed at any evaluated condition among tested materials (P > 0.05). Statistically significant differences were observed between mean inflammatory scores, cell types and granulation tissue of the same material in different experimental periods (P < 0.05). Can be concluded that biocompatibility of MTA bio and PC were comparable with that of ProRoot MTA. Microsc. Res. Tech. 76:311–315, 2013. © 2013 Wiley Periodicals, Inc.     

Marsupial morphology of reproduction: South America opossum male model

This study aims to describe the morphology of Didelphis sp. male genital organs (penis, testes, epididymis, ductus deferens, prostate, and bulbourethral gland). Ten male animals were used, eight for macroscopic and light microscopy analysis, and two for scanning electron microscopy. The testes and epididymis showed similarity to other eutherian mammals. The bifid penis showed the urethra ending in the medial region where the bifurcation begins, occurring in each segment extension of the urethral groove until the beginning of the glans. Histologically, the penis consists of a cavernous and spongy body, covered by stratified squamous epithelium with loose connective tissue. The urethra was lined by transitional stratified epithelium. In the prostate, prostatic segments were found consisting of tubular glands in a radial arrangement around the urethra, coated externally by a dense connective tissue associated with a relatively thick layer of smooth muscle arranged in two layers that surround the glandular tissue. The animals had three pairs of bulbourethral glands placed at the membranous and cavernous urethra junction with descending and parallel excretory ducts ending caudally in the urethral lumen. Microsc. Res. Tech. 76:388–397, 2013. © 2013 Wiley Periodicals, Inc.     

Computational studies of the primary phototransduction event in visual rhodopsin

This Account addresses recent advances in the elucidation of the detailed molecular rearrangements due to the primary photochemical event in rhodopsin, a prototypical G-protein-coupled receptor (GPCR) responsible for the signal transmission cascade in the vertebrate vision process. The reviewed studies provide fundamental insight on long-standing problems regarding the assembly and function of the individual residues and bound water molecules that form the rhodopsin active site, a center that catalyzes the 11-cis/all-trans isomerization of the retinyl chromophore in the primary step of the phototransduction mechanism. Emphasis is placed on the authors' recent computational studies, based on state-of-the-art quantum mechanics/molecular mechanics (QM/MM) hybrid methods, addressing the structural refinement of the retinyl chromophore binding site in high-resolution X-ray structures of bovine visual rhodopsin, the energy storage mechanism, and the molecular origin of spectroscopic changes due to the primary photochemical event.     

Bioreactors Based on Monolith‐Supported Ionic Liquid Phase for Enzyme Catalysis in Supercritical Carbon Dioxide

Bioreactors with covalently supported ionic liquid phases (SILP) were prepared as polymeric monoliths based on styrene–divinylbenzene or 2‐hydroxyethyl methacrylate–ethylene dimethacrylate, and with imidazolium units loadings ranging from 54.7 to 39.8 % wt IL per gram of polymer. The SILPs were able to absorb Candida antarctica lipase B (CALB), leading to highly efficient and robust heterogeneous biocatalysts. The bioreactors were prepared as macroporous monolithic mini‐flow systems and tested for the continuous flow synthesis of citronellyl propionate in supercritical carbon dioxide (scCO₂) by transesterification. The catalytic activity of these mini‐flow‐bioreactors remained practically unchanged for seven operational cycles of 5 h each in different supercritical conditions. The best results were obtained when the most hydrophobic monolith, M‐SILP‐ 8 ‐CALB, was assayed at 80 °C and 10 M Pa, reaching a total turnover number (TON) of 35.8×10⁴ mol product/mol enzyme. The results substantially exceeded those obtained for packed‐bed reactors with supported silica‐CALB‐Si‐4 catalyst under the same experimental conditions.     

山特维克双相不锈钢为炼油厂换热器提供高性价比方案

<正>在炼油厂和化工厂,对固定设备的材料投资需求往往很高。由于装置要在不断提高温度的条件下具有耐腐蚀性能,对其所有材料的选择需要进行特别的考虑。这不仅指材料是否适用,更重要的是耐腐蚀性能是以确保高效可靠的运行。精挑细选的材料可以使得设备的使用寿命更长、维修费用更低、并防止炼油产品由于腐蚀受到污染,并尽可能减少设备结垢引起的热损耗。目前,随着原油含酸量的提高及炼油厂需要加工的终端产品增     

A model for predicting pathologist's velocity profiles when navigating virtual slides

Navigation through large microscopic images is a potential benefit for histology or pathology teaching, for improving the quality of diagnosis in pathology, or for communicating pathologists in some telemedicine applications. However, the size of this kind of images is prohibitive for navigation with conventional techniques. This article presents a soft computing model, which permits to anticipate the pathologist trajectories in diagnosis tasks when exploring virtual slides. The Bayesian strategy combines an offline model of a baseline pathologist knowledge (the prior) and a prediction online module (the likelihood) that captures a particular pathologist navigation pattern. While optimal parameters for the biologically inspired offline model are calculated using an Expectation‐Maximization strategy, prediction is carried out by a particle filter. Parameters are estimated from several series of actual navigations performed by several pathologists in different virtual slides. The present approach is compared with other conventional prediction methods and decreases the calculated MSE in about a 50% for the entire group of pathologists. Microsc. Res. Tech., 2010. © 2009 Wiley‐Liss, Inc.