Coupled temperature and moisture effects on the tensile behavior of strain hardening cementitious composites (SHCC) reinforced with PVA fibers

This paper reports the experimental findings on the tensile behavior of strain-hardening cement-based composites (SHCC). The composites were subjected to the combined effects of elevated temperatures and internal moisture condition. Uniaxial tensile tests on dumbbell-shaped SHCC specimens with in situ temperature control were performed at 22, 60 and 100 °C. In addition, the effect of the internal humidity of SHCC (95, 50, 20 and 0%) coupled to the elevated temperatures was investigated. It was shown that the tensile strength decreases and the strain capacity increases with an increase in temperature. The influence of the internal moisture conditions was more significant in high temperatures. The strain capacity reduced significantly with a decrease in the humidity level. The crack pattern of the SHCC specimens was determined. Furthermore, single fiber pullout tests were performed under the considered high temperatures condition. Finally, the results are discussed based on the thermogravimetry analysis of the PVA fiber, alterations on its microstructure and surface coating.     

Microwave-Assisted Fabrication of Superamphiphobic Surfaces on Aluminum Substrates

The field of superamphiphobic surface fabrication has evolved rapidly in the last decade; however, research on important issues such as sustainability and green chemistry procedures is still scarce. Herein, a simple method of microwave irradiation (MW) to minimize energy consumption during the preparation of superamphiphobic aluminum (Al) surfaces is reported. Al substrates are first etched in diluted HCl solutions to generate a microstructure and then irradiated in a commercial microwave unit for several time intervals, temperatures, and pressures. The surfaces are then coated with different compounds, and the wettability is tested with high and very-low surface tension liquids. Optical profilometry and scanning electron microscopy images show that the density of hierarchical micro-nanostructures increases with MW time, temperature, and pressure. At 170 °C and 7.9 bar, the surfaces present a high density of structures and re-entrant topographies. The obtained coatings display excellent repellence to liquids with surface tensions as low as 27.5 mN m⁻¹. X-ray photoelectron spectroscopy data show the importance of efficient surface functionalization for the production of superamphiphobicity in Al substrates. The results show that MW irradiation of Al substrates can be a green and efficient method for fabricating superamphiphobic surfaces.     

Ex vivo staining of metastatic lymph nodes by class I major histocompatibility complex tetramers reveals high numbers of antigen-experienced tumor-specific cytolytic T lymphocytes

Characterization of cytolytic T lymphocyte (CTL) responses to tumor antigens has been impeded by a lack of direct assays of CTL activity. We have synthesized reagents ("tetramers") that specifically stain CTLs recognizing melanoma antigens. Tetramer staining of tumor-infiltrated lymph nodes ex vivo revealed high frequencies of tumor-specific CTLs which were antigen-experienced by surface phenotype. In vitro culture of lymph node cells with cytokines resulted in very large expansions of tumor-specific CTLs that were dependent on the presence of tumor cells in the lymph nodes. Tetramer-guided sorting by flow cytometer allowed isolation of melanoma-specific CTLs and confirmation of their specificity and their ability to lyse autologous tumor cells. Our results demonstrate the value of these novel reagents for monitoring tumor-specific CTL responses and for generating CTLs for adoptive immunotherapy. These data also indicate that strong CTL responses to melanoma often occur in vivo, and that the reactive CTLs have substantial proliferative and tumoricidal potential.     

Nursing records for discharge. Report of the nursing history

The quality of care within our health care system depends upon an active and dynamic communication which bridges the different levels of care (primary and hospital) and will permit a continuity of services between the distinct parts. To insure this success, the authors propose an outpatient nursing record that will follow the patient upon his or her discharge. This record, to be called the "Discharged Patient Report", will be directed to other medical professionals so that they can be informed of previous treatments that the patient has received. Included in the report will be items such as; the previous nursing interactions that were used on the patient, how problems were resolved, possible other solutions, and health care information given to the patient. Using the report in this way will give us a great tool to know our patients and better understand how to serve them.     

Imhotep: an approach to user and device conscious mobile applications

As the dependence on mobile devices increases, the need for supporting a wider range of users and devices becomes crucial. Elders and people with disabilities adopt new technologies reluctantly, a tendency caused by the lack of adaptation of these technologies to their needs. To address this challenge, this paper describes a framework, Imhotep, whose aim is to aid developers in the accessible application creation process, making the creation of user-centered applications easier and faster. Our framework allows to easily adapt the applications to the constraints imposed by the user capabilities (sensorial, cognitive, and physical capabilities) and device capabilities by providing a repository that will manage the compilation and deployment of applications that include a set of preprocessor directives in the source code. These directives are enhanced with concepts that are automatically adjusted to the current trends of mobile devices by using a Fuzzy Knowledge-Eliciting Reasoner. Our final goal is to increase the number of applications targeted to elders and people with disabilities providing tools that facilitate their development. The paper also describes the evaluation of both the accuracy of the fuzzy terms generated for mobile devices and the usability of the proposed platform.     

Non-standard bone simulation: interactive numerical analysis by computational steering

Numerous numerical methods have been developed in an effort to accurately predict stresses in bones. The largest group are variants of the h-version of the finite element method (h-FEM), where low order Ansatz functions are used. By contrast, we3 investigate a combination of high order FEM and a fictitious domain approach, the finite cell method (FCM). While the FCM has been verified and validated in previous publications, this article proposes methods on how the FCM can be made computationally efficient to the extent that it can be used for patient specific, interactive bone simulations. This approach is called computational steering and allows to change input parameters like the position of an implant, material or loads and leads to an almost instantaneous change in the output (stress lines, deformations). This direct feedback gives the user an immediate impression of the impact of his actions to an extent which, otherwise, is hard to obtain by the use of classical non interactive computations. Specifically, we investigate an application to pre-surgical planning of a total hip replacement where it is desirable to select an optimal implant for a specific patient. Herein, optimal is meant in the sense that the expected post-operative stress distribution in the bone closely resembles that before the operation.     

Algorithms for coupled problems that preserve symmetries and the laws of thermodynamics: Part II: fractional step methods

This article proposes a new type of discretizations for initial boundary value problems of thermodynamical systems. Based on a combination of finite elements in space and fractional step methods in time, we formulate algorithms that exactly preserve the symmetries and the laws of thermodynamics of the continuum problem. The algorithmic design is based on the GENERIC formalism of irreversible thermodynamics which naturally suggests the split of the evolution operator upon which our fractional step method is based. Although the emphasis of the article is on the generality of the results, as an illustration, a discretization of nonlinear, finite strain, thermoelasticity is presented. Numerical simulations are provided that verify the excellent performance of the new methods.     

Information versus Communication in Course Management System participation

Web resources in Latin American higher education institutions have been reported to show a much stronger emphasis on Information than on Communication. A Course Management System (CMS), according to Social Constructivism framework, is an opportunity for fostering learning through interaction in a virtual environment for learning; hence, stimulating the use of a CMS for communication purposes seems quite appropriate. A quantitative analysis of 63.06% of the virtual classrooms was conducted, using the users log database to describe five variables: Participation, Informational Interaction Level, Communicational Interaction Level, and the use of Informational Resources and Communicational Resources in the CMS. An assessment of the first 2 years of implementation of Moodle in a campus confirmed prominence levels of interaction and resources that favor Information over Communication purposes in the use of the CMS. It is not conclusive whether this necessarily implies more or better learning; a profound qualitative study would be needed to answer these questions. Teachers and students show different behaviors in the face of this new ICT campus resource, while faculty members appear to have behaved in an erratic manner, students show steady levels of CMS usage.     

Design issue of a new iCub head sub-system

I am presenting a new design for the head sub-system of the humanoid robot iCub. ICub is a humanoid robot platform that has been conceived as a result of the development of the European Project RobotCub. Mechanical problems of the current head sub-system of iCub robot have been studied in order to figure out improvements for a new design. The feasibility of the new design has been checked through dynamic simulations of the head operations. The successful results have shown plots with curve evolutions of smooth shapes and suitable values of important kinematic and dynamic parameters of the head structure.     

Control of absorption columns in the bioethanol process: Influence of measurement uncertainties

The alcohol lost by evaporation during the bioethanol fermentation process may be collected and recovered using an absorption column. This equipment is also used in the carbonic gas treatment, a by-product from the sugar cane fermentation. In the present work, the development of nonlinear feedforward–feedback controllers, based on neural network inverse models, was proposed and tested to manipulate the absorbent flow rates. The control purposes are: to keep low ethanol concentration in the effluent gas phase from the first absorption column (ethanol recovery column); and to reduce the residual water concentration in the CO₂ gas effluent from the second tower (CO₂ treatment column).Based on simulation studies, the neural network (ANN) controller performance was compared with the conventional PID control scheme application. The best ANN architecture was set up according to the Foresse and Hagan (1997) criterion, while the PID parameters were found from the well-known Cohen–Coon Equations and trial-and-error fine tuning.Initially, performances were evaluated for the system without concentration measurement uncertainties. From these tests, the ANN controller presented the smallest response time and overshoot for regulator and servo problems. Three uncertainty levels were applied afterwards: 5%, 10%, and 15%.The ANN controller outperformed the PID for all uncertainty levels tested for the ethanol recovery column. For the CO₂ treatment column, the ANN controller proceeded successfully under uncertainties of 5% and 10%, while the PID did not deal properly with uncertainties above 5%. The statistical F-test, besides the ITAE, ISE, and IAE performance criteria, were calculated for both controllers applications and then compared. They proved the superiority of the ANN control scheme.Using appropriately the proposed well-controlled absorption columns increases the efficiency of the bioethanol production plant and can also provide carbon credits by avoiding CO₂ emission into the atmosphere.