Can multiscale traffic analysis be used to differentiate Internet applications?

An accurate mapping of Internet traffic to applications can be important for a broad range of network management and measurement tasks, including traffic engineering, service differentiation, performance/failure monitoring and security. Traditional mapping approaches have become increasingly inaccurate because many applications use non-default or ephemeral port numbers, use well-known port numbers associated with other applications, change application signatures or use traffic encryption. In this paper we will demonstrate that multiscale traffic analysis based on multi-order wavelet spectrum can be used as a discriminator of Internet applications traffic profiles. By performing clustering analysis over the multiscale wavelet spectrum coefficients that are inferred from the measured traffic, the proposed methodology is able to efficiently differentiate different IP applications without using any payload information. This characteristic will allow the differentiation of traffic flows in unencrypted and encrypted scenarios. In order to compare the differentiating potential of different traffic application data, upload, download and joint upload and download flow statistics are considered to evaluate the identification approach for each selected protocol. Moreover, we also evaluate which timescales and spectrum orders are more relevant for the traffic differentiation. From the analysis of the obtained results we can conclude that the proposed methodology is able to achieve good identification results using a small set of timescales of a single order wavelet spectrum of a general raw traffic statistic.     

Toward the Optimized Spintronic Response of Sn‐Doped IrO2 Thin Films

Amorphous and polycrystalline Sn‐doped IrO₂ thin films, Ir_1‐xSn_xO₂, are grown for the first time. Their electrical response and strength of the spin–orbit coupling are studied in order to better understand and tailor its performance as spin current detector material. These experiments prove that the resistivity of IrO₂ can be tuned over several orders of magnitude by controlling the doping content in both the amorphous and the polycrystalline state. In addition, growing amorphous samples increase the resistivity, thus improving the spin current to charge current conversion. As far as the spin–orbit coupling is concerned, the system not only remains in a strong spin–orbit coupling regime but it seems to undergo a slight enhancement in the amorphous state as well as in the Sn‐doped samples.     

RF Power Amplifier Behavioral Modeling Based on Takenaka–Malmquist–Volterra Series

In this paper, a Takenaka–Malmquist–Volterra (TMV) model structure is employed to improve the approximations in the low-pass equivalent behavioral modeling of radio frequency (RF) power amplifiers (PAs). The Takenaka–Malmquist basis generalizes the orthonormal basis functions previously used in this context. In addition, it allows each nonlinearity order in the expanded Volterra model to be parameterized by multiple complex poles (dynamics). The state-space realizations for the TMV models are introduced. The pole sets for the TMV model and also for the previous Laguerre–Volterra (LV) and Kautz–Volterra (KV) models are obtained using a constrained nonlinear optimization approach. Based on experimental data measured on a GaN HEMT class AB RF PA excited by a WCDMA signal, it is observed that the TMV model reduces the normalized mean-square error and the adjacent channel error power ratio for the upper adjacent channel (upper ACEPR) by 1.6 dB when it is compared to the previous LV and KV models under the same computational complexity.     

From irradiance to output power fluctuations: the PV plant as a low pass filter

The power generated by large grid‐connected photovoltaic (PV) plants depends greatly on the solar irradiance. This paper studies the effects of the solar irradiance variability analyzing experimental 1‐s data collected throughout a year at six PV plants, totaling 18 MWp. Each PV plant was modeled as a first order filter function based on an analysis in the frequency domain of the irradiance data and the output power signals. An empiric expression which relates the filter parameters and the PV plant size has been proposed. This simple model has been successfully validated precisely determining the daily maximum output power fluctuation from incident irradiance measurements. Copyright © 2011 John Wiley & Sons, Ltd.     

Autonomous and teleoperation control of a mobile robot

The present work proposes an autonomous tracking control system and a control structure to combine autonomous and teleoperation commands in a bicycle-type mobile robot. This compounded operation renders great flexibility to the control system of the mobile robot. For autonomous operation, a simple tracking controller that includes compensation of the robot dynamics is developed. This tracking control system is proved to be stable in the sense that it asymptotically reaches the tracking objective. Teleoperation with visual access to the robot’s workspace is integrated via a joystick with the autonomous operation of the robot. Simulations and experimental results on a prototype robot show the feasibility and performance of the proposed control system.     

Image dehazing using morphological opening,dilation and Gaussian filtering

Image pre-processing is a critical stage in computer vision systems, with greater relevance when the input images are captured in outdoor environments because the pictures could contain low contrast and modified colors. A common condition present in outdoor images is haze. In this work, a new dehazing algorithm based on dark channel prior mathematical morphology operations (opening and dilation), and a Gaussian filter, is proposed. Moreover, the proposed algorithm performance is compared qualitatively and quantitatively against previously reported algorithms. Obtained results show that the proposed algorithm requires less processing time providing higher quality dehazing results than other state-of-the-art approaches.     

Tuning Memristivity by Varying the Oxygen Content in a Mixed Ionic–Electronic Conductor

The rising interest shown for adaptable electronics and brain‐inspired neuromorphic hardware increases the need for new device architectures and functional materials to build such devices. The rational design of these memory components also benefits the comprehension and thus the control over the microscopic mechanisms at the origin of memristivity. In oxide‐based valence‐change memories, the control of the oxygen drift and diffusion kinetics is a key aspect in obtaining the gradual analog‐type change in resistance required for artificial synapse applications. However, only a few devices are designed with this in mind, as they are commonly built around ionic insulating active materials. This shortcoming is addressed by using a mixed ionic–electronic conductor as functional memristive material. This work demonstrates how the oxygen content in La₂NiO_4+δ (L2NO4), tuned through post‐annealing treatments, has a critical influence on the memory characteristics of L2NO4‐based memristive devices. The presence of interstitial oxygen point defects in L2NO4 affects both its structure and electrical properties. High oxygen stoichiometry in the pristine state leads to an increased electrical conductivity, ultimately resulting in an improved memory window with highly multilevel, analog‐type memory programing capabilities, desirable for analog computing and synaptic applications in particular.     

Unprecedented Improvement of Single Li‐Ion Conductive Solid Polymer Electrolyte Through Salt Additive

Solid‐state lithium metal (Li°) batteries (SSLMBs) are believed to be the most promising technologies to tackle the safety concerns and the insufficient energy density encountered in conventional Li‐ion batteries. Solid polymer electrolytes (SPEs) inherently own good processability and flexibility, enabling large‐scale preparation of SSLMBs. To minimize the growth of Li° dendrites and cell polarization in SPE‐based SSLMBs, an additive‐containing single Li‐ion conductive SPE is reported. The characterization results show that a small dose of electrolyte additive (2 wt%) substantially increases the ionic conductivity of single Li‐ion conductive SPEs as well as the interfacial compatibility between electrode and SPE, allowing the cycling of SPE‐based cells with good electrochemical performance. This work may provide a paradigm shift on the design of highly cationic conductive electrolytes, which are essential for developing safe and high‐performance rechargeable batteries.     

STC power for 15 MW of PV comparing nameplate,initial power and power after 4 years

To date, the majority of quality controls performed at PV plants are based on the measurement of a small sample of individual modules. Consequently, there is very little representative data on the real Standard Test Conditions (STC) power output values for PV generators. This paper presents the power output values for more than 1300 PV generators having a total installed power capacity of almost 15.3 MW. The values were obtained by the INGEPER‐UPNA group, in collaboration with the IES‐UPM, through a study to monitor the power output of a number of PV plants from 2006 to 2009. This work has made it possible to determine, amongst other things, the power dispersion that can be expected amongst generators made by different manufacturers, amongst generators made by the same manufacturer but comprising modules of different nameplate ratings and also amongst generators formed by modules with the same characteristics. The work also analyses the STC power output evolution over time in the course of this 4‐year study. The values presented here could be considered to be representative of generators with fault‐free modules. Copyright © 2012 John Wiley & Sons, Ltd.     

Numerical simulation of dam construction using low-CO<Subscript>2</Subscript>-emission concrete

Cement production gives rise to CO₂ emissions generated by the calcination of CaCO₃ and by the combustion of fossil fuels, being responsible for about 5% of the global CO₂ emissions. These emissions can be substantially reduced if cement replacement materials are used. In this paper two residual ashes that can be used as mineral additions are considered: sugar cane bagasse ash and rice husk ash. A case study of the construction of a dam with a blended material composed by cement and these two ashes is presented, indicating the potentiality of its use for civil engineering applications. The analyses were performed using experimental and numerical tools developed on the basis of a thermo-chemo-mechanical model. This model considers the coupling, within the theory of thermodynamics, of the several phenomena that intervene in the hydration process, namely, exothermicity, thermo-activation, chemo-plasticity, evolution of thermal and mechanical properties with the hydration reaction, which includes creep and relaxation.