Transport of chemical and microbial compounds from known wastewater discharges: potential for use as indicators of human fecal contamination

The quality of drinking and recreational water is currently (2005) determined using indicator bacteria. However, the culture tests used to analyze forthese bacteria require a long time to complete and do not discriminate between human and animal fecal material sources. One complementary approach is to use chemicals found in human wastewater, which would have the advantages of (1) potentially shorter analysis times than the bacterial culture tests and (2) being selected for human-source specificity. At 10 locations, water samples were collected upstream and at two successive points downstream from a wastewaster treatment plant (WWTP); a treated effluent sample was also collected at each WWTP. This sampling plan was used to determine the persistence of a chemically diverse suite of emerging contaminants in streams. Samples were also collected at two reference locations assumed to have minimal human impacts. Of the 110 chemical analytes investigated in this project, 78 were detected at least once. The number of compounds in a given sample ranged from 3 at a reference location to 50 in a WWTP effluent sample. The total analyte load at each location varied from 0.018 microg/L at the reference location to 97.7 microg/L in a separate WWTP effluent sample. Although most of the compound concentrations were in the range of 0.01-1.0 microg/L, in some samples, individual concentrations were in the range of 5-38 microg/L. The concentrations of the majority of the chemicals present in the samples generally followed the expected trend: they were either nonexistent or at trace levels in the upstream samples, had their maximum concentrations in the WWTP effluent samples, and then declined in the two downstream samples. This research suggests that selected chemicals are useful as tracers of human wastewater discharge.     

基于室外风环境与热舒适度的城市设计改进策略——以北京西单商业街为例

城市室外风热环境对于城市生活品质起着不容忽视的作用,对于城市室外公共空间,如商业街,行人层高度风环境与热舒适度的优劣对其商业价值有着直接的影响.选取北京西单商业街为案例进行研究,基于北京夏季炎热高温冬季寒冷风强的地域气候特征,结合其数次城市设计环境改造,通过数值模拟手段,对北京西单商业街冬夏两季室外开放空间行人层风环境与热舒适度进行综合评价,针对现存导致室外风热环境恶化的城市设计问题提出改进措施,并总结提升城市户外风热环境品质的普适性城市设计策略.结果可从户外舒适度的角度提供同类型商业街区的城市设计参考,从而创造宜居的城市户外环境与空间.     

Integrated instrumental analysis of soft brown coals

A method for the simultaneous determination of calorific value Q^r, ash yieldA^r and total water content W^r_t of soft brown coals is described. The method involves instrumental analysis of brown coal samples using neutron thermalization and gamma back-scattering techniques. Over 80 coal samples (1.1 kg) were analysed, having Q^rvalues up to 15.5 MJ kg^?1,A^r ranging from 3.6 to 76.1 wt% and W^r_t ranging from 11.4 to 61.7 wt%. A comparison of the results from the instrumental method with those of standard laboratory analyses is given, followed by a discussion of the accuracy of the method and of possible ways for improving it.     

EFFECT OF MASS FLUX AND SYSTEM PRESSURE ON TWO-PHASE FRICTION MULTIPLIER

A horizontal boiling water loop was used to obtain pressure drop and heat transfer data for two-phase steam-water flow for pressures of up to 825 kPa. The data were used to examine the predictions of the separated flow model using the Lockhart-Martinelli method of estimating the two-phase friction multiplier.

The influence of mass flux on the two-phase friction multiplier has been reported for high pressure systems by many workers. The present work confirms the existence of this influence at low pressures as well. System pressure is also found to be a parameter. A correlation for the two-phase friction multiplier, incorporating the effects of mass flux and pressure, is presented here. The correlation has been tested against data from two independent sources. The predictions have been found to be in very good agreement with the data.     

Craze fibril formation and breakdown

As crazes grow in areal extent they also increase in width. The areal growth involves craze tip advance which has been shown to occur by the Taylor meniscus instability. Craze widening, at least for air crazes, occurs by drawing more fibrillar material from the craze-bulk polymer interfaces at essentially constant extension ratio. Simple arguments will be given to predict the scale of the fibrillation in terms of the stress S at the craze tip and interfaces and an effective polymer surface energy (Γ) where: which assumes that all entangled chain crossing the surface are broken [γ represents the van-der-Waals (intermolecular) surface energy, d is the entanglement mesh size, v_E is the entanglement density, and U_b is the energy required to break a single backbone bond]. These arguments also give the rate of fibrillation as a function of S, a nominal plastic resistance σ_y and Γ and can explain the fact that the stress for crazing increases relative to that for shear deformation as the entanglement density of the polymer is increased. The geometrically necessary entanglement loss (either by scission as assumed above or by disentanglement- at temperatures just below T_g) that accompanies fibril formation has important consequences for fibril stability. The probability p that a given entangled chain is lost can be computed from simple geometrical considerations knowing the fibril diameter D, its extension ratio λ and the mesh size d; p increases rapidly as Dλ^½ becomes comparable to or less than d. These concepts can be tested in blends of high molecular weight polymer with chains of the same polymer that are too short to entangle.     

Differences in two-dimensional gel electrophoresis patterns of skeletal muscle myosin light chain isoforms between Bos taurus, Sus scrofa and selected poultry species

BACKGROUND: In this study the interspecies differences in two‐dimensional electrophoresis patterns of skeletal muscle myosin light chain (MLC) isoforms between Bos taurus (cattle), Sus scrofa (pig), Gallus gallus (chicken), Meleagris gallopavo (turkey), Anas platyrhynchos (duck) and Anser anser (goose) were characterised on the basis of specific properties of MLCs associated with their structure and mobility in gel. RESULTS: Two‐dimensional electrophoresis separations revealed species‐specific differences in the molecular weight and pI of individual MLC isoforms (MLC1f, MLC2f and MLC3f). In the case of closely related animal species such as goose and duck or turkey and chicken, significant differences occurred in MLC1f. For MLC2f, differences between cattle and turkey and between pig and chicken were around 1 and 0.3 kDa respectively. It appeared from the comparison of amino acid sequences that even MLCs with only 2% difference in sequences have different electrophoretic mobilities. CONCLUSION: Interspecies differences in skeletal MLC isoforms appeared between cattle, pig, chicken, turkey, duck and goose. The slight changes observed in the course of the aging process confirmed that these proteins are relatively little susceptible to proteolytic enzymes during meat aging. Copyright © 2011 Society of Chemical Industry     

Antioxidant capacity,total phenolics,glucosinolates and colour parameters of rapeseed cultivars

The antioxidant capacity of twenty nine rapeseed varieties was determined by using ferric reducing antioxidant power (FRAP) and 2,2′-diphenyl-1-picrylhydrazyl (DPPH) methods. Mean FRAP (3190–6326 μmol Trolox/100 g) and DPPH (3194–6346 μmol Trolox/100 g) values for methanolic extracts of rapeseed cultivars did not differ significantly. Moreover, the total content of phenolics (756–1324 mg sinapic acid/100 g), glucosinolates (4.2–87.5 μmol/g, respectively), erucic acid (0.0–56.1%) and colour parameters of the studied rapeseed cultivars were analysed. Antioxidant capacity determined by FRAP and DPPH methods correlated significantly with total phenolic content (TPC) in rapeseed cultivars (r = 0.9332, 0.9339, p < 0.001). Also, significant, inverse correlations were found between antioxidant capacity, total phenolics and luminosity (L^∗) or red colour intensity (a^∗) of rapeseed cultivars. Principal component analysis (PCA) allowed the rapeseed varieties to be differentiated based on their antioxidant capacities, total amounts of phenolics, glucosinolates, erucic acid and colour parameters.     

Effect of government actions on technological innovation for SO2 control

The relationship between government actions and innovation in environmental control technology is important for the design of cost-effective policies to achieve environmental goals. This paper examines such relationships for the case of sulfur dioxide control technology for U.S. coal-fired power plants. The study employs several complementary research methods, including analyses of key government actions, technology patenting activity, technology performance and cost trends, knowledge transfer activities, and expert elicitations. Our results indicate that government regulation appears to be a greater stimulus to inventive activity than government-sponsored research support alone, and that the anticipation of regulation also spurs inventive activity. Regulatory stringency focuses this activity along particular technical pathways and is a key factor in creating markets for environmental technologies. We also find that with greater technology adoption, both new and existing systems experience notable efficiency improvements and capital cost reductions. The important role of government in fostering knowledge transfer via technical conferences and other measures is also seen as an important factor in promoting environmental technology innovation.     

Oxidation of H2S by iron oxides in unsaturated conditions

Previous studies have demonstrated that gas-phase H2S can immobilize certain redox-sensitive contaminants (e.g., Cr, U, Tc) in vadose zone environments. A key issue for effective and efficient delivery of H2S in these environments is the reactivity of the gas with indigenous iron oxides. To elucidate the factors that control the transport of H2S in the vadose zone, laboratory column experiments were conducted to identify reaction mechanisms and measure rates of H2S oxidation by iron oxide-coated sands using several carrier gas compositions (N2, air, and O2) and flow rates. Most experiments were conducted using ferrihydrite-coated sand. Additional studies were conducted with goethite- and hematite-coated sand and a natural sediment. Selective extractions were conducted at the end of each column experiment to determine the mass balance of the reaction products. XPS was used to confirm the presence of the reaction products. For column experiments in which ferrihydrite-coated sand was the substrate and N2 was the carrier gas, the major H2S oxidation products were FeS and elemental sulfur (mostly S8(0), represented as S(0) for simplicity) at ratios that were consistent with the stoichiometry of the postulated reactions. When air or O2 were used as the carrier gas, S(0) became the dominant reaction product along with FeS2 and smaller amounts of FeS, sulfate, and thiosulfate. A mathematical model of reactive transport was used to test the hypothesis that S(0) forming on the iron oxide surfaces reduces access of H2S to the reactive surface. Several conceptual models were assessed in the context of the postulated reactions with the final model based on a linear surface poisoning model and fitted reaction rates. These results indicate that carrier gas selection is a critical consideration with significant tradeoffs for remediation objectives.     

Model representation of secondary organic aerosol in CMAQv4.7

Numerous scientific upgrades to the representation of secondary organic aerosol (SOA) are incorporated into the Community Multiscale Air Quality (CMAQ) modeling system. Additions include several recently identified SOA precursors: benzene, isoprene, and sesquiterpenes; and pathways: in-cloud oxidation of glyoxal and methylglyoxal, particle-phase oligomerization, and acid enhancement of isoprene SOA. NO(x)-dependent aromatic SOA yields are also added along with new empirical measurements of the enthalpies of vaporization and organic mass-to-carbon ratios. For the first time, these SOA precursors, pathways and empirical parameters are included simultaneously in an air quality model for an annual simulation spanning the continental U.S. Comparisons of CMAQ-modeled secondary organic carbon (OC(sec)) with semiempirical estimates screened from 165 routine monitoring sites across the U.S. indicate the new SOA module substantially improves model performance. The most notable improvement occurs in the central and southeastern U.S. where the regionally averaged temporal correlations (r) between modeled and semiempirical OC(sec) increase from 0.5 to 0.8 and 0.3 to 0.8, respectively, when the new SOA module is employed. Wintertime OC(sec) results improve in all regions of the continental U.S. and the seasonal and regional patterns of biogenic SOA are better represented.