New Carvone-Based Deep Eutectic Solvents for Siloxanes Capture from Biogas

During biogas combustion, siloxanes form deposits of SiO₂ on engine components, thus shortening the lifespan of the installation. Therefore, the development of new methods for the purification of biogas is receiving increasing attention. One of the most effective methods is physical absorption with the use of appropriate solvents. According to the principles of green engineering, solvents should be biodegradable, non-toxic, and have a high absorption capacity. Deep eutectic solvents (DES) possess such characteristics. In the literature, due to the very large number of DES combinations, conductor-like screening models for real solvents (COSMO-RS), based on the comparison of siloxane activity coefficient of 90 DESs of various types, were studied. DESs, which have the highest affinity to siloxanes, were synthesized. The most important physicochemical properties of DESs were carefully studied. In order to explain of the mechanism of DES formation, and the interaction between DES and siloxanes, the theoretical studies based on σ-profiles, and experimental studies including the ¹H NMR, ¹³C NMR, and FT-IR spectra, were applied. The obtained results indicated that the new DESs, which were composed of carvone and carboxylic acids, were characterized by the highest affinity to siloxanes. It was shown that the hydrogen bonds between the active ketone group (=O) and the carboxyl group (-COOH) determined the formation of stable DESs with a melting point much lower than those of the individual components. On the other hand, non-bonded interactions mainly determined the effective capture of siloxanes with DES.     

Gemini Surfactants Foam Formation Ability and Foam Stability Depends on Spacer Length

A series of cationic gemini surfactants containing different spacer length were synthesized and analyzed structurally. It was shown that the surface tension (σ) and critical micelle concentration (CMC), which had a maximum for the n-C₄H₈ spacer depended on the spacer length. The foaming ability and foam stability are high for the gemini surfactants with short spacers (C₂H₄ to n-C₄H₈), while longer spacers lead to a distinct decrease of these foam parameters. Foaming properties are discussed in terms of configuration and conformation of a surfactant molecule and in relation to micellization state kinetic.     

Spontaneous formation of polylactide stereocomplex microspheres containing metal ions

Linear poly(l ‐lactides) (PLLAs ) and poly(d ‐lactides) (PDLAs ) with M _n in the range 2000 ? 4300 containing a different number and placement of carboxyl groups were obtained via cationic ring‐opening polymerization and post‐polymerization functionalization. PLA stereoisomers (PLLA ‐(COOH )_x and PDLA ‐(COOH )_x , where x = 1 ? 3) were used for the investigation of stereocomplexation in solution performed in the presence of metal cations such as Ca²⁺, Mg²⁺, Zn²⁺, Fe³⁺. Spherical microparticles with a diameter in the range 0.7 ? 3.0 µm were obtained in all cases which was confirmed on the basis of scanning electron microscopy (SEM ) analysis. The microsphere size and homogeneity were analyzed depending on the stereocomplexation conditions and the molecular weight as well as the number of carboxyl end groups in the PLLA and PDLA used for stereocomplexation. The PLA microspheres obtained were analyzed by Fourier transform IR spectroscopy, wide angle X‐ray spectroscopy and energy‐dispersive X‐ray spectroscopy methods which confirmed the presence of metal cations inside. The application of regular microspheres with metal ions as drug delivery systems is considered. © 2016 Society of Chemical Industry     

Impact of spinel forming systems (Fe-/Mg-/Mn-Al-O) as functional coating materials for carbon-bonded alumina filters on steel melt filtration

Since solid, non-metallic inclusions influence considerably the quality of casted steel products, carbon-bonded alumina foam filters are used in secondary metallurgical treatments to remove these particles from steel melts. In order to attain a significant improvement of the filtration process, five different carbonaceous spinel compounds from the Fe-/Mg-/Mn-Al-O systems are applied on carbon-bonded alumina filters in this study and investigated with regard of their filtration efficiency. However, these spinel compounds decompose partially during sintering at 1400?°C under reducing atmosphere, wherefore the resulting coatings contain not only spinel compounds, but also oxidic and metallic components. The subsequent interaction with molten steel leads to the development of multicrystal structures on the filter surface, which stem from interfacial reactions between coating materials, molten steel, and inclusions. As a result of this procedure, a reduction of almost 60% alumina inclusions is measured with the aid of an automatic SEM, whereby spinel compounds from the Fe-Mn-Al-O system achieve highest filtration efficiencies.     

Influence of the Rancimat Apparatus Operating Parameters on Oxidative Stability Determination of Cold-Pressed Camelina and Hemp Seed Oil

The study investigates the impact of operating parameters such as temperature (90, 100, 110, 120 °C), airflow rate (10, 15, 20 L h⁻¹), and sample weight (3, 6, 9 g) on the oxidative stability of cold-pressed camelina and hemp seed oils using the Rancimat apparatus. Conducted analysis indicates a significant influence of temperature on oils' induction time. Moreover, higher airflows should be selected at high analysis temperatures. Based on the calculated parameters of the oxidation kinetics, it was shown that hemp oil has higher activation energy values than camelina oil. Response surface methodology (RSM) indicates that to minimize the determination time of camelina oil oxidation, the following analysis conditions should be selected: sample weight (SW) = 33.5 g, airflow (AF) = 20 L h⁻¹, and temperature (T) = 120 °C. However, for hemp oil, these parameters should be SW = 5.56 g, AF = 15 L h⁻¹, T = 120 °C. Sample mass does not significantly impact oils induction time, which depends mainly on the temperature and airflow. Practical applications: The conducted research shows that the parameters of the cold-pressed camelina and hemp oils oxidative stability have to be determined experimentally. The determined parameters for assessing the oxidative stability will reduce the analysis time and the possibility of interpolating the obtained result at different temperatures and analysis parameters.     

Dynamic Changes in the Ability to Release Neutrophil ExtraCellular Traps in the Course of Childhood Acute Leukemias

Acute leukemias, the most common cancers in children, are characterized by excessive proliferation of malignant progenitor cells. As a consequence of impaired blood cell production, leukemia patients are susceptible to infectious complications—a major cause of non-relapse mortality. Neutrophil extracellular traps (NETs) are involved in various pathologies, from autoimmunity to cancer. Although aberrant NETs formation may be partially responsible for immune defects observed in acute leukemia, still little is known on the NET release in the course of leukemia. Here, we present the first comprehensive evaluation of NETs formation by neutrophils isolated from children with acute leukemia in different stages of the disease and treatment stimulated in vitro with phorbol 12-myristate 13-acetate (PMA), N-formyl-methionyl-leucyl-phenylalanine (fMLP), and calcium ionophore (CI). NETs release was measured using quantitative fluorescent method and visualized microscopically. In this setting, NETs release was significantly impaired in leukemic children both at the diagnosis and during the treatment, and full restoration of neutrophil function was achieved only after successful completion of the leukemia treatment. We suggest that neutrophil function impairment may result from both disease- and treatment-related factors. In this context, deficient innate immune response observed in acute leukemia patients may be present regardless of neutrophil count and contribute to secondary immunodeficiency observed in this population.     

Lysophosphatic acid modulates prostaglandin secretion in the bovine uterus

Lysophosphatidic acid (LPA) modulates prostaglandin (PG) synthesis via LPA receptor 3 (LPAR3) in the murine endometrium. The lack of functional LPAR3 in mice may lead to embryo mortality. In the present study, we examined the role of LPA in the bovine uterus. We confirmed that LPA is locally produced and released from the bovine endometrium. Moreover, there are enzymes involved in LPA synthesis (phospholipase (PL) D(2) and PLA2G1B) in the bovine endometrium during estrous cycle and early pregnancy. Expression of the receptor for LPA (LPAR1) was positively correlated with the expression of PGE(2) synthase (PGES) and negatively correlated with the expression of PGF(2alpha) synthase (aldose reductase with 20 alpha-hydroxysteroid dehydrogenase activity - PGFS) during early pregnancy. In vivo LPA induced P4 and PGE(2) secretion was inhibited by LPAR1 antagonist (Ki16425). The overall results indicate that LPA is locally produced and released from the bovine endometrium. Moreover, LPAR1 gene expression in the endometrium during the estrous cycle and early pregnancy indicates that LPA may play autocrine and/or paracrine roles in the bovine uterus. LPAR1 gene expression is positively correlated with the expression of the enzyme responsible for luteotropic PGE(2) production (PGES) in endometrium. In cow, LPA stimulates P4 and PGE(2) secretion. Thus, LPA in the bovine reproductive tract may indirectly (via endometrium) or directly support corpus luteum action via the increase of P4 synthesis and the increase of PGE(2)/PGF(2)(alpha) ratio. It suggests that LPA may serve as an important factor in the maintenance of early pregnancy in cow.     

Near-real-time combustion monitoring for PCDD/PCDF indicators by GC-REMPI-TOFMS

The boiler exit flue gas of a municipal waste combustor was sampled to evaluate an online monitoring system for chlorobenzene congeners as indicators of polychlorinated dibenzodioxin and dibenzofuran (PCDD/PCDF) concentrations. Continuous measurements of chlorobenzene congeners using gas chromatography coupled to a resonance-enhanced multiphoton ionization - time-of-flight mass spectrometry (GC-REMPI-TOFMS) system were compared over 5-min periods with conventional sampling methods for PCDD/PCDF. Three pairs of values were taken every hour over a period of three days to characterize the combustor's response to transient operating conditions (shutdowns and startups). Isolation of specific chlorobenzene congeners from other same-mass compounds was accomplished by using a GC column separator ahead of the REMPI-TOFMS. The 50-fold variation of PCDD/PCDF concentration was paralleled by similar changes in monitored compounds of 1,4-dichlorobenzene, 1,2,4-trichlorobenzene, 1,2,3-trichlorobenzene, and 1,2,4,5-tetrachlorobenzene. A correlation of R = 0.85 and 0.89 was established between 40 pairs of simultaneous 5-min GC-REMPI-TOFMS measurements of 1,2,4-trichlorobenzene and 5 min conventional sampling and analysis for the TEQ and Total measures of PCDD/PCDF, respectively. The GC-REMPI-TOFMS system can be used to provide frequent measures of correlative PCDD/PCDF concentration thereby allowing for an understanding of measures to minimize PCDD/PCDF formation and develop operational feedback to limit emissions.     

Semivolatile and volatile organic compound emissions from wood-fired hydronic heaters

Emissions including polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs), polyaromatic hydrocarbons (PAHs), and volatile organic compounds (VOCs), were sampled from different wood-fired hydronic heater (HH) technologies. Four commercially available HH technologies were studied: a single-stage conventional combustor with natural updraft, a three-stage downdraft combustion system, a bottom-fed pellet burner, and a two-stage heater with both a combustion and gasification chamber. The fuel consisted of three wood types (red oak, white pine, and white ash), one hardwood pellet brand, and one fuel mixture containing 95% red oak and 5% residential refuse by weight. The various HHs and fuel combinations were tested in a realistic homeowner fuel-charging scenario. Differences in emission levels were found between HH technologies and fuel types. PCDD/PCDF emissions ranged from 0.004 to 0.098 ng toxic equivalency/MJ(input) and PAHs from 0.49 to 54 mg/MJ(input). The former was increased by the presence of 5% by weight refuse. The white pine fuel had the highest PAH emission factor, while the bottom fed pellet burner had the lowest. The major VOCs emitted were benzene, acetylene, and propylene. The highest emissions of PAHs, VOCs, and PCDDs/PCDFs were observed with the conventional unit, likely due to the rapid changes in combustion conditions effected by the damper opening and closing.     

Towards the Identification of New Genes Involved in ABA-Dependent Abiotic Stresses Using Arabidopsis Suppressor Mutants of abh1 Hypersensitivity to ABA during Seed Germination

Abscisic acid plays a pivotal role in the abiotic stress response in plants. Although great progress has been achieved explaining the complexity of the stress and ABA signaling cascade, there are still many questions to answer. Mutants are a valuable tool in the identification of new genes or new alleles of already known genes and in elucidating their role in signaling pathways. We applied a suppressor mutation approach in order to find new components of ABA and abiotic stress signaling in Arabidopsis. Using the abh1 (ABA hypersensitive 1) insertional mutant as a parental line for EMS mutagenesis, we selected several mutants with suppressed hypersensitivity to ABA during seed germination. Here, we present the response to ABA and a wide range of abiotic stresses during the seed germination and young seedling development of two suppressor mutants—soa2 (suppressor of abh1 hypersensitivity to ABA 2) and soa3 (suppressor of abh1 hypersensitivity to ABA 3). Generally, both mutants displayed a suppression of the hypersensitivity of abh1 to ABA, NaCl and mannitol during germination. Both mutants showed a higher level of tolerance than Columbia-0 (Col-0—the parental line of abh1) in high concentrations of glucose. Additionally, soa2 exhibited better root growth than Col-0 in the presence of high ABA concentrations. soa2 and soa3 were drought tolerant and both had about 50% fewer stomata per mm² than the wild-type but the same number as their parental line—abh1. Taking into account that suppressor mutants had the same genetic background as their parental line—abh1, it was necessary to backcross abh1 with Landsberg erecta four times for the map-based cloning approach. Mapping populations, derived from the cross of abh1 in the Landsberg erecta background with each suppressor mutant, were created. Map based cloning in order to identify the suppressor genes is in progress.