Authenticity Assessment of Extra Virgin Olive Oil: Evaluation of Desmethylsterols and Triterpene Dialcohols

Extra virgin olive oil (EVOO) has a long history of economic adulteration, the detection of which presents significant challenges due to the diverse composition of cultivars grown around the world and the limitations of existing methods for detecting adulteration. In this study, using Method COI/T.20/Doc. No. 30/Rev. 1 of the International Olive Council, the authenticity of 88 market samples of EVOO was evaluated by comparing total sterol contents, desmethylsterol composition, and contents of triterpene dialcohols (erythrodiol and uvaol) with purity criteria specified in the United States Standards for grades of olive oil and olive‐pomace oil. Three of the 88 samples labeled as EVOO failed to meet purity criteria, indicating possible adulteration with commodity oil and/or solvent‐extracted olive oil. Detection of adulteration was also evaluated by spiking an EVOO sample with commodity oil at the 10 % level. As expected, eight of the spiked samples (canola, corn, hazelnut, peanut, safflower, soybean, and sunflower oils, and palm olein) failed to meet purity criteria. Two of the three samples spiked with 10 % hazelnut oil went undetected for adulteration. Overall, a low occurrence rate of adulteration (<5 %), based on purity criteria for desmethylsterols and triterpene dialcohols, was detected for the 88 products labeled as EVOO.     

Creation of small kinetic models for CFD applications: a meta-heuristic approach

This paper updates a method for generating small, accurate kinetic models for applications in computational fluid dynamics programs. This particular method first uses a time-integrated flux-based algorithm to generate the smallest possible skeletal model based on the detailed kinetic model. Then, it uses a multi-stage optimization process in which multiple runs of a genetic algorithm are used to optimize the rate constant parameters of the retained reactions. This optimization technique provides the user with the flexibility needed to balance the fidelity of the model with their time constraints. The updated method was applied to the reduction of a methane-air model under conditions meant to approximate the end of a compression stroke of an internal combustion engine. When compared to previous techniques, the results showed that this method could produce a more accurate model in considerably less time. The best model obtained in this study resulted in relative errors ranging from 0.22 to 1.14% on all six optimization targets. This reduced model was also able to adequately predict optimization targets for certain operating conditions, which were not included in the optimization process.

     

Modeling and optimization of the chamber of OWC system

Due to their non-polluting nature and environment friendliness, Renewable Energies have gained great deal of attention and deserve a substantial body of both theoretical and empirical research. Amongst other factors, the low operational cost and simple maintenance procedures attributed the Oscillating Water Column (OWC) are perhaps the main reasons why this system is the most used concept for the ocean wave energy capture.In this paper, through extensive experimental research various geometrical designs of an OWC system is investigated and the optimized set up for the maximum energy harness is obtained.The initial chamber dimensions were 10 × 50 × 53 cm with the chamber being placed in an open channel with wave-simulating equipment with dimensions of 16 × 0.7 × .05 m. For various chamber geometries, with the aid of a air rotameter and a Pitot tube equipped with a digital manometer, the outlet air flow and velocity from the chamber was measured and registered.The measurements were then interpreted to provide design data for the optimal geometry of the chamber that may yield the maximum conversion of wave energy to useful energy.     

Hydrogen from solar energy,a clean energy carrier from a sustainable source of energy

Solar energy is going to play a crucial role in the future energy scenario of the world that conducts interests to solar-to-hydrogen as a means of achieving a clean energy carrier. Hydrogen is a sustainable energy carrier, capable of substituting fossil fuels and decreasing carbon dioxide (CO₂) emission to save the world from global warming. Hydrogen production from ubiquitous sustainable solar energy and an abundantly available water is an environmentally friendly solution for globally increasing energy demands and ensures long-term energy security. Among various solar hydrogen production routes, this study concentrates on solar thermolysis, solar thermal hydrogen via electrolysis, thermochemical water splitting, fossil fuels decarbonization, and photovoltaic-based hydrogen production with special focus on the concentrated photovoltaic (CPV) system. Energy management and thermodynamic analysis of CPV-based hydrogen production as the near-term sustainable option are developed. The capability of three electrolysis systems including alkaline water electrolysis (AWE), polymer electrolyte membrane electrolysis, and solid oxide electrolysis for coupling to solar systems for H₂ production is discussed. Since the cost of solar hydrogen has a very large range because of the various employed technologies, the challenges, pros and cons of the different methods, and the commercialization processes are also noticed. Among three electrolysis technologies considered for postulated solar hydrogen economy, AWE is found the most mature to integrate with the CPV system. Although substantial progresses have been made in solar hydrogen production technologies, the review indicates that these systems require further maturation to emulate the produced grid-based hydrogen.     

The Ablation and Oxidation Behaviors of SiC Coatings on Graphite Prepared by Slurry Sintering and Pack Cementation

SiC coatings were generated on graphite using slurry sintering (SS) and pack cementation (PC). The samples’ ablation features were assessed by an oxyacetylene torch. The rates of mass ablation of the PC–SiC and SS–SiC coatings were approximated 2.17?×?10^?3 and 9.52?×?10^?3 g s^?1, respectively, decreased by 84.1 and 29.6% compared to the uncoated samples. It was mainly attributed to the formation of a SiO₂ layer on the surface. The continuous SiO₂ molten film formed via the PC–SiC oxidation generates a sealing mechanism which can be an obstacle against the oxygen diffusion and hinder more ablation. This is while discontinuous SiO₂ film formed from the thin SS–SiC cannot protect the graphite effectively. The non-isothermal oxidation test shows that without the SiC coating, the sample weight is lost largely from 25 to 1500 °C, and its weight loss was 2.2% after the TGA. However, after coating, the samples possessed excellent oxidation protection and weight losses of SS–SiC and PC–SiC coatings are down to 1.3 and 0.6%, respectively. The more oxidation of the graphite substrate occurred due to the formation of macrocracks in the coating during the TGA and also the formation of holes on SiO₂ glass layer owing to release of CO or CO₂.     

Numerical investigation of pressure drop characteristics of gas channels and U and Z type manifolds of a PEM fuel cell stack

Fluid flow manifold plays a significant role in the performance of a fuel cell stack because it affects the pressure drop, reactants distribution uniformity and flow losses, significantly. In this study, the flow distribution and the pressure drop in the gas channels including the inlet and outlet manifolds, with U- and Z-type arrangements, of a 10-cell PEM fuel cell stack are analyzed at anode and cathode sides and the effects of inlet reactant stoichiometry and manifold hydraulic diameter on the pressure drop are investigated. Furthermore, the effect of relative humidity of oxidants on the pressure drop of cathode are investigated. The results indicate that increase of the manifold hydraulic diameter leads to decrease of the pressure drop and a more uniform flow distribution at the cathode side when air is used as oxidant while utilization of humidified oxidant results in increase of pressure drop. It is demonstrated that for the inlet stoichiometry of 2 and U type manifold arrangement when the relative humidity increases from 25% to 75%, the pressure drop increases by 60.12% and 116.14% for oxygen and air, respectively. It is concluded that there is not a significant difference in pressure drop of U- and Z-type arrangements when oxygen is used as oxidant. When air is used as oxidant, the effect of manifold type arrangement is more significant than other cases, and increase of the stoichiometry ratio from 1.25 to 2.5 leads to increase of pressure drop by 527.3%.     

Rapid Biofabrication of Printable Dense Collagen Bioinks of Tunable Properties

Recent convergence of the 3D printing of tissue‐like bioinks and regenerative medicine offers promise in the high‐throughput engineering of in vitro tissue models and organoids for drug screening and discovery research, and of potentially implantable neo‐tissues with tailored structural, biological, and mechanical properties. However, the current printing approaches are not compatible with collagen, the native scaffolding material. Herein, a unique biofabrication approach that uses automated gel aspiration‐ejection (GAE) is reported to potentially overcome these challenges. Automated‐GAE generates highly defined, aligned, dense collagen gel bioinks of various geometries (i.e., cylindrical, quadrangular, and tubular), dimensions, as well as tunable microstructural and mechanical properties that modulate seeded cellular responses. By densifying initial naturally derived reconstituted collagen hydrogels incorporating cells, automated‐GAE generates mini‐tissue building blocks with tailored protein fibril density and alignment, as well as cell loading, density and orientation according to the intended use. Surprisingly, a simple mathematical relationship defining the bioink compaction factor is found to be highly effective in predicting the initial and temporal properties of the bioinks in culture. Therefore, automated‐GAE will potentially also enable a fourth dimension to biofabrication, where cell–cell communications and cell‐extracellular matrix interactions as a function of time in culture can be predicted and modeled.     

Development of a void ratio-moisture ratio-net stress framework for the prediction of the volumetric behavior of unsaturated granular materials

Despite extensive research on the behavior of unsaturated fine-grained materials, there is still a lack of understanding of the volumetric behavior of unsaturated granular materials. In this research, a model has been developed to predict the fundamental volumetric behavior of unsaturated granular materials through loading and wetting state paths. In this regard, a loading-wetting surface was developed in a space of void ratio-moisture ratio-net stress. A distinctive feature of the proposed model is the relative simplicity in obtaining the model parameters using conventional geotechnical testing equipment. Two types of recycled granular materials, commonly applied in unbound pavements were used, namely, recycled crushed brick (CB) and excavation waste rock (WR). The uniqueness of the developed surface was evaluated by employing a number of loading and wetting state paths. The results indicate that the developed surface is unique in its loading state paths; however, it only shows uniqueness in its wetting state paths for stress levels greater than 2000 kPa. The proposed model seeks to introduce the application of the unsaturated soil mechanics theory, for predicting the behavior of granular materials in the field, by providing a practical and cost-effective methodology.     

Comprehensive review of water management and wastewater treatment in food processing industries in the framework of water-food-environment nexus

Food processing is among the greatest water-consuming industries with a significant role in the implementation of sustainable development goals. Water-consuming industries such as food processing have become a threat to limited freshwater resources, and numerous attempts are being carried out in order to develop and apply novel approaches for water management in these industries. Studies have shown the positive impact of the new methods of process integration (e.g., water pinch, mathematical optimization, etc.) in maximizing water reuse and recycle. Applying these methods in food processing industries not only significantly supported water consumption minimization but also contributed to environmental protection by reducing wastewater generation. The methods can also increase the productivity of these industries and direct them to sustainable production. This interconnection led to a new subcategory in nexus studies known as water-food-environment nexus. The nexus assures sustainable food production with minimum freshwater consumption and minimizes the environmental destructions caused by untreated wastewater discharge. The aim of this study was to provide a thorough review of water-food-environment nexus application in food processing industries and explore the nexus from different aspects. The current study explored the process of food industries in different sectors regarding water consumption and wastewater generation, both qualitatively and quantitatively. The most recent wastewater treatment methods carried out in different food processing sectors were also reviewed. This review provided a comprehensive literature for choosing the optimum scenario of water and wastewater management in food processing industries.