The thermomechanical behavior of micro/nano-alumina (Al2O3) ceramics reinforced with 1-5 wt.% of acid-treated oil fly ash (OFA) was investigated. Composites were sintered using spark plasma sintering (SPS) technique at a temperature of 1400°C by applying a constant uniaxial pressure of 50 MPa. It was evaluated that the fracture toughness of micro- and nanosized composites improved in contrast with the monolithic alumina. Highest fracture toughness value of 4.85 MPam1/2 was measured for the nanosized composite reinforced with 5 wt.% OFA. The thermal conductivity of the composites (nano-/microsized) decreased with the increase in temperature. However, the addition of OFA (1-5 wt.%) in nanosized alumina enhanced the thermal conductivity at an evaluated temperature. Furthermore, a minimum thermal expansion value of 6.17 ppm*K−1 was measured for nanosized Al2O3/5 wt.% OFA composite. Microstructural characterization of Al2O3-OFA composites was done by x-ray diffraction and Raman spectroscopy. Oil fly ash particles were seen to be well dispersed within the alumina matrix. Moreover, the comparative analysis of the nano-/microsized Al2O3/OFA composites shows that the mechanical and thermal properties were improved in nanosized alumina composites. 相似文献
Extra virgin olive oil (EVOO) has a long history of economic adulteration, the detection of which presents significant challenges due to the diverse composition of cultivars grown around the world and the limitations of existing methods for detecting adulteration. In this study, using Method COI/T.20/Doc. No. 30/Rev. 1 of the International Olive Council, the authenticity of 88 market samples of EVOO was evaluated by comparing total sterol contents, desmethylsterol composition, and contents of triterpene dialcohols (erythrodiol and uvaol) with purity criteria specified in the United States Standards for grades of olive oil and olive‐pomace oil. Three of the 88 samples labeled as EVOO failed to meet purity criteria, indicating possible adulteration with commodity oil and/or solvent‐extracted olive oil. Detection of adulteration was also evaluated by spiking an EVOO sample with commodity oil at the 10 % level. As expected, eight of the spiked samples (canola, corn, hazelnut, peanut, safflower, soybean, and sunflower oils, and palm olein) failed to meet purity criteria. Two of the three samples spiked with 10 % hazelnut oil went undetected for adulteration. Overall, a low occurrence rate of adulteration (<5 %), based on purity criteria for desmethylsterols and triterpene dialcohols, was detected for the 88 products labeled as EVOO. 相似文献
In this article, the catalytic conversion of methanol to gasoline range hydrocarbons has been studied over CuO/ NH4‐ZSM‐5(3,5,7,9%) catalysts prepared via sono‐chemistry methods. In order to improve, copper oxide can be used as a booster on NH4‐ZSM‐5 this catalyst property. Accordingly, the conversion process of Methanol to Gasoline (MTG) was conducted under a pressure of 1 atm and temperature of 400°C by a fixed‐bed reactor on copper oxide catalysts which were prepared based on synthetic NH4‐ZSM‐5. The synthetic catalyst was investigated by such analyses as BET, XRD, FT‐IR, and SEM. Formation of copper oxide phase and proper distribution of copper oxide were proven on the basic level of using XRD analysis. BET analysis showed the reduction in catalyst level and SEM images depicted the proper distribution of particles. The present investigation is to study the effect of CuO loading on NH4‐ZSM‐5 support for conversion of methanol to gasoline range hydrocarbons. A series of CuO/ NH4‐ZSM‐5 catalysts were prepared, characterized, and experimented for their performance on methanol conversion and hydrocarbon yield. 相似文献
This paper updates a method for generating small, accurate kinetic models for applications in computational fluid dynamics programs. This particular method first uses a time-integrated flux-based algorithm to generate the smallest possible skeletal model based on the detailed kinetic model. Then, it uses a multi-stage optimization process in which multiple runs of a genetic algorithm are used to optimize the rate constant parameters of the retained reactions. This optimization technique provides the user with the flexibility needed to balance the fidelity of the model with their time constraints. The updated method was applied to the reduction of a methane-air model under conditions meant to approximate the end of a compression stroke of an internal combustion engine. When compared to previous techniques, the results showed that this method could produce a more accurate model in considerably less time. The best model obtained in this study resulted in relative errors ranging from 0.22 to 1.14% on all six optimization targets. This reduced model was also able to adequately predict optimization targets for certain operating conditions, which were not included in the optimization process.
Diffusion joining of commercially pure titanium was successfully prepared via transient liquid phase bonding in vacuum environment. The process was carried out using AMS 4772 silver-based filler alloy at 900–1000°C for various holding time under the vacuum of 6?×?10?7?Torr. Optical and scanning electron microscopy equipped with an EDS analyzer was conducted for microstructural evaluations. Mechanical properties were also investigated by shear test, fractographic assessment and X-ray diffraction analyses. The tendency to achieve isothermally solidified joint increased by increasing bonding time. No sign of athermal solidification was detected of sample bonded at 1000°C for 90?min. Consequently, the bonding condition of a high quality joint was obtained. Elemental analyses revealed that filler alloy’s elements (Ag, Cu) distributed more uniformly in fully isothermal solidified bond, whereas the aggregation of these elements is considerable in athermally solidified bond. Shear test results represented that the highest shear strength attributed to the sample bonded in isothermal solidified condition (bonded at 1000°C for 90?min). 相似文献
This paper introduces pictorial intelligent system for human identification (PiSHi), an image-based captcha which uses three human cognitive abilities to distinguish humans from machines. The first is the human ability to easily recognise the image’s upright orientation. The second is the human brain’s ability in recognising a picture’s content when it is only partially visible. And the third is the human ability in unconscious decision making when encountering pictorial challenges. This work models such complicated human patterns in problem solving for the first time. In order to extract these behavioural patterns and save them in a pattern database, we have implemented our own captcha and performed a series of experiments. PiSHi’s interface presents the user with a set of distorted pictures and asks her to click on the upright orientation of all the pictures in any preferred order. Next, it captures the user’s interaction patterns, compares them with the ones saved in the pattern database, and grants her a corresponding credit. Based on this credit, the user either passes or fails the test, and participates in updating the picture database. Our experiments indicate that human users can solve our proposed captcha effectively—with an accuracy of 99.44 %. Besides, our proposed system is secure against several types of attacks including random guessing and reverse image search engines. The results offer the possibility of utilising the identified human behavioural models in practical captchas. 相似文献
The paper presents further experiments with an extended version of a comprehensive model for assessment of energy technologies and research and development (R&D) planning to evaluate the impact of innovation programs on development of Iranian electricity-supply system. This analytical instrument is a model of energy R&D resource allocation with an explicit perspective of developing countries which has been linked to a bottom-up energy-systems model. Three emerging electricity generation technologies of solar PV, wind turbine and gas fuel cell are considered in the model and the impact of innovation programs on cost-reducing innovation for them is examined. The main results provided by the modeling approach include optimal allocation of R&D resources, induced capacity expansion policies to guarantee the effectiveness of R&D activities, competitive cost of emerging technologies, impact of innovation programs on optimal structure of electricity-supply system and benefits of innovation programs in the long-run. 相似文献
Due to their non-polluting nature and environment friendliness, Renewable Energies have gained great deal of attention and deserve a substantial body of both theoretical and empirical research. Amongst other factors, the low operational cost and simple maintenance procedures attributed the Oscillating Water Column (OWC) are perhaps the main reasons why this system is the most used concept for the ocean wave energy capture.In this paper, through extensive experimental research various geometrical designs of an OWC system is investigated and the optimized set up for the maximum energy harness is obtained.The initial chamber dimensions were 10 × 50 × 53 cm with the chamber being placed in an open channel with wave-simulating equipment with dimensions of 16 × 0.7 × .05 m. For various chamber geometries, with the aid of a air rotameter and a Pitot tube equipped with a digital manometer, the outlet air flow and velocity from the chamber was measured and registered.The measurements were then interpreted to provide design data for the optimal geometry of the chamber that may yield the maximum conversion of wave energy to useful energy. 相似文献