The Ablation and Oxidation Behaviors of SiC Coatings on Graphite Prepared by Slurry Sintering and Pack Cementation

SiC coatings were generated on graphite using slurry sintering (SS) and pack cementation (PC). The samples’ ablation features were assessed by an oxyacetylene torch. The rates of mass ablation of the PC–SiC and SS–SiC coatings were approximated 2.17?×?10^?3 and 9.52?×?10^?3 g s^?1, respectively, decreased by 84.1 and 29.6% compared to the uncoated samples. It was mainly attributed to the formation of a SiO₂ layer on the surface. The continuous SiO₂ molten film formed via the PC–SiC oxidation generates a sealing mechanism which can be an obstacle against the oxygen diffusion and hinder more ablation. This is while discontinuous SiO₂ film formed from the thin SS–SiC cannot protect the graphite effectively. The non-isothermal oxidation test shows that without the SiC coating, the sample weight is lost largely from 25 to 1500 °C, and its weight loss was 2.2% after the TGA. However, after coating, the samples possessed excellent oxidation protection and weight losses of SS–SiC and PC–SiC coatings are down to 1.3 and 0.6%, respectively. The more oxidation of the graphite substrate occurred due to the formation of macrocracks in the coating during the TGA and also the formation of holes on SiO₂ glass layer owing to release of CO or CO₂.     

Numerical investigation of pressure drop characteristics of gas channels and U and Z type manifolds of a PEM fuel cell stack

Fluid flow manifold plays a significant role in the performance of a fuel cell stack because it affects the pressure drop, reactants distribution uniformity and flow losses, significantly. In this study, the flow distribution and the pressure drop in the gas channels including the inlet and outlet manifolds, with U- and Z-type arrangements, of a 10-cell PEM fuel cell stack are analyzed at anode and cathode sides and the effects of inlet reactant stoichiometry and manifold hydraulic diameter on the pressure drop are investigated. Furthermore, the effect of relative humidity of oxidants on the pressure drop of cathode are investigated. The results indicate that increase of the manifold hydraulic diameter leads to decrease of the pressure drop and a more uniform flow distribution at the cathode side when air is used as oxidant while utilization of humidified oxidant results in increase of pressure drop. It is demonstrated that for the inlet stoichiometry of 2 and U type manifold arrangement when the relative humidity increases from 25% to 75%, the pressure drop increases by 60.12% and 116.14% for oxygen and air, respectively. It is concluded that there is not a significant difference in pressure drop of U- and Z-type arrangements when oxygen is used as oxidant. When air is used as oxidant, the effect of manifold type arrangement is more significant than other cases, and increase of the stoichiometry ratio from 1.25 to 2.5 leads to increase of pressure drop by 527.3%.     

Rapid Biofabrication of Printable Dense Collagen Bioinks of Tunable Properties

Recent convergence of the 3D printing of tissue‐like bioinks and regenerative medicine offers promise in the high‐throughput engineering of in vitro tissue models and organoids for drug screening and discovery research, and of potentially implantable neo‐tissues with tailored structural, biological, and mechanical properties. However, the current printing approaches are not compatible with collagen, the native scaffolding material. Herein, a unique biofabrication approach that uses automated gel aspiration‐ejection (GAE) is reported to potentially overcome these challenges. Automated‐GAE generates highly defined, aligned, dense collagen gel bioinks of various geometries (i.e., cylindrical, quadrangular, and tubular), dimensions, as well as tunable microstructural and mechanical properties that modulate seeded cellular responses. By densifying initial naturally derived reconstituted collagen hydrogels incorporating cells, automated‐GAE generates mini‐tissue building blocks with tailored protein fibril density and alignment, as well as cell loading, density and orientation according to the intended use. Surprisingly, a simple mathematical relationship defining the bioink compaction factor is found to be highly effective in predicting the initial and temporal properties of the bioinks in culture. Therefore, automated‐GAE will potentially also enable a fourth dimension to biofabrication, where cell–cell communications and cell‐extracellular matrix interactions as a function of time in culture can be predicted and modeled.     

Development of a void ratio-moisture ratio-net stress framework for the prediction of the volumetric behavior of unsaturated granular materials

Despite extensive research on the behavior of unsaturated fine-grained materials, there is still a lack of understanding of the volumetric behavior of unsaturated granular materials. In this research, a model has been developed to predict the fundamental volumetric behavior of unsaturated granular materials through loading and wetting state paths. In this regard, a loading-wetting surface was developed in a space of void ratio-moisture ratio-net stress. A distinctive feature of the proposed model is the relative simplicity in obtaining the model parameters using conventional geotechnical testing equipment. Two types of recycled granular materials, commonly applied in unbound pavements were used, namely, recycled crushed brick (CB) and excavation waste rock (WR). The uniqueness of the developed surface was evaluated by employing a number of loading and wetting state paths. The results indicate that the developed surface is unique in its loading state paths; however, it only shows uniqueness in its wetting state paths for stress levels greater than 2000 kPa. The proposed model seeks to introduce the application of the unsaturated soil mechanics theory, for predicting the behavior of granular materials in the field, by providing a practical and cost-effective methodology.     

Comprehensive review of water management and wastewater treatment in food processing industries in the framework of water-food-environment nexus

Food processing is among the greatest water-consuming industries with a significant role in the implementation of sustainable development goals. Water-consuming industries such as food processing have become a threat to limited freshwater resources, and numerous attempts are being carried out in order to develop and apply novel approaches for water management in these industries. Studies have shown the positive impact of the new methods of process integration (e.g., water pinch, mathematical optimization, etc.) in maximizing water reuse and recycle. Applying these methods in food processing industries not only significantly supported water consumption minimization but also contributed to environmental protection by reducing wastewater generation. The methods can also increase the productivity of these industries and direct them to sustainable production. This interconnection led to a new subcategory in nexus studies known as water-food-environment nexus. The nexus assures sustainable food production with minimum freshwater consumption and minimizes the environmental destructions caused by untreated wastewater discharge. The aim of this study was to provide a thorough review of water-food-environment nexus application in food processing industries and explore the nexus from different aspects. The current study explored the process of food industries in different sectors regarding water consumption and wastewater generation, both qualitatively and quantitatively. The most recent wastewater treatment methods carried out in different food processing sectors were also reviewed. This review provided a comprehensive literature for choosing the optimum scenario of water and wastewater management in food processing industries.     

Probiotic yoghurt functionalised with microalgae and Zedo gum: chemical,microbiological, rheological and sensory characteristics

In this study, using a central composite design, the effects of addition of Spirulina platensis and Zedo gum to plain and probiotic yoghurt samples were investigated during storage. Lactobacillus paracasei proliferation was directly dependent on the addition of microalgae and was inversely affected by storage time. Probiotic samples containing S. platensis showed the highest antioxidative activity. Maximum stability was obtained at higher amounts of Zedo gum, while organoleptic and rheological attributes improved at 0.25% Zedo gum. Given the importance of probiotic viability, supplementation of probiotic yoghurt with Zedo gum/S. platensis may be consideredas a novel nutraceutical formulation.     

Expression of Main Toll-Like Receptors in Patients with Different Types of Colorectal Polyps and Their Relationship with Gut Microbiota

Abnormal activation of Toll-like receptor (TLRs) signaling can result in colon cancer development. The aim of this study was to investigate the expression of important TLRs in different histological types of colorectal polyps and evaluate their relationship with intestinal microbiota. The expression levels of TLR2, 3, 4, and 5 were analyzed in intestinal biopsy specimens of 21 hyperplastic polyp (HP), 16 sessile serrated adenoma (SSA), 29 tubular adenoma (TA), 21 villous/tubulovillous (VP/TVP) cases, and 31 normal controls. In addition, selected gut bacteria including Streptococcus bovis, Enterococcus faecalis, Enterotoxigenic Bacteroides fragilis (ETBF), Fusobacterium nucleatum, Porphyromonas spp., Lactobacillus spp., Roseburia spp., and Bifidobacterium spp. were quantified in fecal samples using absolute qRT PCR, and, finally, the association between TLRs and these gut microbiota- was evaluated by Spearman’s correlation coefficient. Higher expression of TLR2 and TLR4 in VP/TVP and TA, and lower expression levels of TLR3 and TLR5 in all type of polyps were observed. The differences in TLR expression patterns was not only dependent on the histology, location, size, and dysplasia grade of polyps but also related to the intestinal microbiota patterns. TLR2 and TLR4 expression was directly associated with the F. nucleatum, E. faecalis, S. bovis, Porphyromonas, and inversely to Bifidobacterium, Lactobacillus, and Roseburia quantity. Furthermore, TLR3 and TLR5 expression was directly associated with Bifidobacterium, Roseburia, and Lactobacillus quantity. Our results suggest a possible critical role of TLRs during colorectal polyp progression. An abnormal regulation of TLRs in relation to gut microbial quantity may contribute to carcinogenesis.     

Zinc Oxide/Graphene Oxide as a Robust Active Catalyst for Direct Oxidative Synthesis of Nitriles from Alcohols in Water

Catalysis Letters - In this work, without using any linker or chemical modification of graphene oxide, a zinc oxide immobilized graphene oxide-based catalyst was used for the direct aerobic...     

Study on the performance of Cd2+ sorption using dimethylethylenediamine-modified zinc-based MOF (ZIF-8-mmen): optimization of the process by RSM technique

ABSTRACT

Cadmium as a highly toxic metal is released into the environment through paper production, metal processing, phosphate fertilizers, insecticides, and treatment of wastewater. Cadmium also inhibits the body activities and is very toxic for kidney and other organisms. In the current study, zinc-based metal–organic framework, zeolitic imidazolate framework (ZIF)-8, was synthesized and modified by dimethylethylenediamine (ZIF-8-mmen) for the removal of cadmium. To optimize the experiments, response surface methodology was applied with three variables including pH, adsorbent dosage, and contact time using central composite design. The optimum conditions for pH, dosage, and time were 2, 0.1 g, and 89 min, respectively, with removal efficiency of 85.38%. The Langmuir isotherm (q _m = 1000 mg/g) indicates the monolayer adsorption. The kinetic studies reveal that the Lagergren model was predominant and cadmium was not chemisorbed. Thermodynamic parameters show spontaneous, endothermic, and physisorption processes.