The effect of chemical crosslinking on the properties of Rotomolded high density polyethylene

In this study, high density polyethylene (HDPE) was combined with dicumyl peroxide (DCP) to produce crosslinked parts via rotational molding. The effect of DCP content (0.1–2.5 phr) on the crosslinking degree was investigated to determine its effect on the chemical, mechanical, physical, and thermal properties of HDPE. The gel content and crosslink density was found to increase with DCP content. These trends led to a reduction in the degree of crystallinity, melting, and crystallization temperature. Thermogravimetric analysis (TGA) showed that crosslinked HDPE (xHDPE) has higher thermal stability than the neat matrix in both air and nitrogen atmosphere. In addition, a direct relationship was observed between improved thermal resistance and higher impact strength. Finally, relationships between the tensile properties of xHDPE and the degree of crystallinity were observed, which were all controlled by the level of crosslinking. These results have the potential to advance the manufacturing of high performance materials suitable for a wide range of applications such as automotive parts, agricultural products, chemical storage tanks, large waste containers, and fuel tanks in general.     

New Flower-Shaped Lead(II) Coordination Polymer at the Nano Scale: Synthesis, Structural Characterization and DFT Calculations of [Pb(o-phen)(N3)2] n Containing the Pb-(μ1,1-N3)(μ1,3-N3) Motif

A new nano-flower lead(II) azido coordination polymer from the ligand, orthophenanthroline (o-phen), [Pb(o-phen)(μ_1,1-N₃)(μ_1,3-N₃)] _n (1), was synthesized by a sonochemical method. Compound 1 was characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), elemental analyses and IR spectroscopy. Single crystalline material was obtained using a heat gradient applied to a solution of the reagents. The structure of 1 is a coordination polymer of lead(II) containing the Pb-(μ_1,1-N₃)(μ_1,3-N₃) motif, formed of one-dimensional chains. The structure of the 1 was optimized by density functional theory. Structural parameters and IR spectra for 1 are consistent with the crystal structure. Pure phase PbO nanoparticles were obtained by thermolysis of 1 with oleic acid as a surfactant at 180 and 200 °C an air. PbO nanoparticles were characterized by XRD and SEM.     

Synthesis and characterization of alumina supported sub-nanoporous SiO2–10 wt%TiO2 membrane for nitrogen separation

Membrane of SiO₂–10TiO₂ was produced by dip coating on mesoporous-titania-coated macroporous alumina support. The amorphous SiO₂–10TiO₂ top layer with thickness of 0.9 μm was obtained as a homogenous and defect free surface. Gas permeation tests show a decrease in permeation in order of CH₄ > N₂ for the support, and N₂ > CH₄ for the multilayer membrane. The membrane delivering promised single gas separation factor for N₂/CH₄ (1.75). It was also observed that the membrane separation factor in binary gas mixture was 12–15% of the single gas separation factor, while the permeation revealed a decrease in gas mixture.     

Zinc Oxide/Graphene Oxide as a Robust Active Catalyst for Direct Oxidative Synthesis of Nitriles from Alcohols in Water

Catalysis Letters - In this work, without using any linker or chemical modification of graphene oxide, a zinc oxide immobilized graphene oxide-based catalyst was used for the direct aerobic...     

Preparation and characterization of poly(vinyl alcohol)/gum tragacanth/cellulose nanocomposite film

The effects of gum tragacanth obtained from two species of Astragalus Gossypinus (GT-G) and A. Parrowianus (GT-P) at two levels of 10% and 30% combined with cellulose nanofibers (CNF; 5%) on the physico-mechanical and structural properties of polyvinyl alcohol (PVA) nanocomposite film were investigated in this study. The water solubility and water vapor permeability of the films decreased with increasing the content of both gums, especially in the film containing 30% GT-P. The highest values of the tensile strength (39.3 MPa) and elongation at break (445%) belonged to the treatment containing 10% GT-P (90/10P/0). The FTIR and DSC analyses confirmed good interactions between GT and PVA in the 90/10P/0 treatment. SEM images indicated the dense structure of this film as the optimum treatment. Although the presence of CNF in the films containing GT-G improved some properties, especially the Young modulus, it impaired all the functional properties of nanocomposite GT-P film.     

Solving singular control problems using uniform trigonometrization method

This study investigates the application of a recently developed construct, the uniform trigonometrization method (UTM), to the singular control problems in chemical engineering. The UTM involves minimal modifications to the original problem, thereby generating near-singular control solutions that can be used for conceptual design and serve as an alternate to direct techniques like nested and simultaneous approaches. Eight classical singular control problems with known analytical solutions and three complex singular control problems from chemical engineering domain are solved in this study. The results obtained using the UTM for these problems are found to match well with the literature and are of higher resolution as compared to the results obtained using a direct pseudospectral-based solver. The ability of the UTM to handle complex chemical engineering problems with both singular controls and state path constraints has also been demonstrated in this study.     

Pre-aging time dependence of microstructure and mechanical properties in nanostructured Al-2wt%Cu alloy

This work is focused on the effect of pre-aging time on the properties of Al-2wt%Cu alloy processed by accumulative roll bonding (ARB) process. Following aged at 190 °C for 10 or 30 min, the samples were deformed up to a strain of 4.8 by the ARB process. The microstructure evolution was investigated by transmission electron microscope and electron backscattering diffraction analyzes. The results showed that the Al₂Cu precipitates were formed with different sizes due to the different pre-aging times and the finer precipitates were more effective on the formation of high angle grain boundaries during the ARB process. The grain size of Aged-10 min and Aged-30 min specimens decreased to 400 nm and 420 nm, respectively, after 6 cycles of the ARB process. Also, the final texture after 6 cycles of the ARB process, shown in the {111} pole figure, were different depending on the starting microstructures. The mechanical properties of specimens were investigated by the Vickers microhardness measurements and the tensile tests. The results showed that the mechanical properties are affected by the starting microstructure. The mechanical properties of Aged-10 min specimen were different compared to Aged-30 min specimen due to the different size of the pre-existing precipitates. Although by continuing process, the precipitates were probably dissolved due to the heavy deformation.     

The Ablation and Oxidation Behaviors of SiC Coatings on Graphite Prepared by Slurry Sintering and Pack Cementation

SiC coatings were generated on graphite using slurry sintering (SS) and pack cementation (PC). The samples’ ablation features were assessed by an oxyacetylene torch. The rates of mass ablation of the PC–SiC and SS–SiC coatings were approximated 2.17?×?10^?3 and 9.52?×?10^?3 g s^?1, respectively, decreased by 84.1 and 29.6% compared to the uncoated samples. It was mainly attributed to the formation of a SiO₂ layer on the surface. The continuous SiO₂ molten film formed via the PC–SiC oxidation generates a sealing mechanism which can be an obstacle against the oxygen diffusion and hinder more ablation. This is while discontinuous SiO₂ film formed from the thin SS–SiC cannot protect the graphite effectively. The non-isothermal oxidation test shows that without the SiC coating, the sample weight is lost largely from 25 to 1500 °C, and its weight loss was 2.2% after the TGA. However, after coating, the samples possessed excellent oxidation protection and weight losses of SS–SiC and PC–SiC coatings are down to 1.3 and 0.6%, respectively. The more oxidation of the graphite substrate occurred due to the formation of macrocracks in the coating during the TGA and also the formation of holes on SiO₂ glass layer owing to release of CO or CO₂.     

Dissimilar Joining of Pure Copper to Aluminum Alloy via Friction Stir Welding

In this study, the dissimilar friction stir welding(FSW) butt joints between aluminum alloy 5754-H114 and commercially pure copper were investigated. The thickness of welded plates was 4 mm and the aluminum plate was placed on the advancing side. In order to obtain a suitable flow and a better material mixing, a 1-mm offset was considered for the aluminum plate, toward the butt centerline. For investigating the microstructure and mechanical properties of FSWed joints, optical microscopy and mechanical tests(i.e., uniaxial tensile test and microhardness) were used, respectively.Furthermore, the analysis of intermetallic compounds and fracture surface was examined by scanning electron microscopy and X-ray diffraction. The effect of heat generation on the mechanical properties and microstructure of the FSWed joints was investigated. The results showed that there is an optimum amount of heat input. The intermetallic compounds formed in FSWed joints were Al4Cu9 and Al2Cu. The best results were found in joints with 1000 rpm rotational speed and100 mm/min travel speed. The tensile strength was found as 219 MPa, which reached 84% of the aluminum base strength.Moreover, maximum value of the microhardness of the stir zone(SZ) was attained as about 120 HV, which was greatly depended on the grain size, intermetallic compounds and copper pieces in SZ.     

An investigation on the impacts of regulatory interventions on wind power expansion in generation planning

Large integration of intermittent wind generation in power system has necessitated the inclusion of more innovative and sophisticated approaches in power system investment planning. This paper presents a novel framework on the basis of a combination of stochastic dynamic programming (SDP) algorithm and game theory to study the impacts of different regulatory interventions to promote wind power investment in generation expansion planning. In this study, regulatory policies include Feed-in-Tariff (FIT) incentive, quota and tradable green certificate. The intermittent nature and uncertainties of wind power generation will cause the investors encounter risk in their investment decisions. To overcome this problem, a novel model has been derived to study the regulatory impacts on wind generation expansion planning. In our approach, the probabilistic nature of wind generation is modeled. The model can calculate optimal investment strategies, in which the wind power uncertainty is included. This framework is implemented on a test system to illustrate the working of the proposed approach. The result shows that FITs are the most effective policy to encourage the rapid and sustained deployment of wind power. FITs can significantly reduce the risks of investing in renewable energy technologies and thus create conditions conducive to rapid market growth.