New conceptual three-phase current-fed soft switching pulse width modulation converter with switched capacitor type resonant dc link

This paper presents a novel prototype of three-phase current-fed PWM converter with a switched capacitor type resonant dc link snubber circuit, which can basically operate under a principle of zero current soft switching commutation. The optimum PWM pattern-based control scheme proposed by the authors is effectively applied for this active converter. In this paper, the steady-state operating principle of a new converter circuit treated here is described. The practical design procedure of this converter is discussed from a theoretical point of view. The feasible experiment to confirm zero current soft switching commutation of this converter is concretely implemented and evaluated herein.     

Hot-carrier effects in scaled MOS devices

A universal guideline and state-of-the-art hot-carrier effects in scaled MOSFETs are reviewed and discussed from the viewpoints of 1) DC and AC hot-carrier effects, 2) hot-carrier detrapping phenomena, 3) mechanical stress effects on hot-carrier phenomena, and 4) hot-carrier resistant device structures.In the deep-submicron region, the hot-carrier applicable voltage is less than 3 V, so AC hot-carrier effects from the dynamic operation of actual circuits should be taken into account. Despite much experimentation and analysis, there is still no universally accepted theory that explain the AC degradation mechanism. This is because the noise caused by the wiring inductance in ULSI circuits and in measurement systems screens the intrinsic AC hot-carrier effects.Here, AC hot-carrier degradation enhanced by gate pulse-induced-noise is analyzed experimentally and theoretically. After eliminating the noise problem, it is found that AC hot-carrier degradation in LDD (Lightly doped drain) and GOLD (gate-drain overlapped device) structures can be estimated based on DC degradation in terms of the effective stress time which takes the duty ratio into account. In addition, it is found that the noise is negligible when the wiring inductance is smaller that 80 nH (250 mω), which is important for future circuit design.Furthermore, hot-carrier detrapping effects, especially in p-channel MOS devices, and hot-carrier phenomena under mechanical stress are investigated experimentally to better understand the underlying hot-carrier physics. Finally, future hot-carrier resistant device structures are discussed.     

Next-generation 10 GBaud module based on emerging SFP+ with host-based EDC [Topics in Optical Communications]

There has been an ongoing trend to require transceivers for use in datacom and telecom switches to be small and have low power dissipation to enable large port count switches. At speeds between 1 and 4 GBaud the SFP form factor is by far the most commonly used. Up to now 10 GBaud transceivers have used larger devices with larger power dissipations. This article describes the SFP+ module being specified by the SFF Committee (SFF 8431) that will enable the same port densities as the SFP module. The adaptive equalizers and high-speed transmission channels required in the switches to make the SFP+ module work successfully are also described     

局部干法水下Nd:YAG激光焊接技术

本文采用填丝热导焊的方法研究了水下激光焊接的基本物理现象,结果表明,利用气体喷嘴可形成局部干燥空间,其保护效果取决于喷嘴结构和气体流量等参数。喷嘴的外径大小对保护效果影响显著。当保护条件差时,局部干燥空间将有水浸入,导致焊缝由良好保护条件下的浅而表面光滑平整的形状变为深而表面起伏的形状。良好保护条件下的水下焊缝的力学性能和大气中一致。     

Sedimentation study on the binding of fibrinogen or of antithrombin III with acidic polysaccharides including heparin

Summary The binding of fibrinogen with heparin and dextran sulfates, and of antithrombin III with heparin and dextran sulfate were investigated by sedimentation velocity method. From the measurement of fibrinogen-acidic polysaccharide systems, it was confirmed that heparin and low molecular weight dextran sulfate(DSC) forms soluble complexes with fibrinogen, though the amount bound of the latter was rather small compared with high molecular weight dextran sulfate(DSD). Antithrombin III was also found to be bound by heparin and DSC. The numbers of heparin molecules bound to one molecule of fibrinogen and antithrombin III were estimated to be 4.2 and 0.3, respectively.     

External-cavity semiconductor laser with focusing grating mirror

A novel external-cavity semiconductor laser with a focusing grating mirror (FGM), which enables a single-mode oscillation at a specified wavelength, is proposed. The optical properties of the FGM, which is a computer-generated holographic grating with chirp and bend structure, are numerically analyzed. An optimally designed FGM for realizing laser oscillation at a specific wavelength of 1.30 μm is fabricated by using a computer-controlled electron-beam writing system. The fabricated FGM with grating area of 1×1 mm² is combined as an external feedback mirror with an InGaAsP-InP semiconductor laser of 1.3 μm wavelength range, and the lasing characteristics are experimentally measured. Stable and single-mode oscillations with spectral line width less than 10 MHz are observed     

Nido-Hydroborate-Based Electrolytes for All-Solid-State Lithium Batteries

Hydroborate-based solid electrolytes have recently been successfully employed in high voltage, room temperature all-solid-state sodium batteries. The transfer to analogous lithium systems has failed up to now due to the lower conductivity of the corresponding lithium compounds and their high cost. Here LiB₁₁H₁₄ nido-hydroborate as a cost-effective building block and its high-purity synthesis is introduced. The crystal structures of anhydrous LiB₁₁H₁₄ as well as of LiB₁₁H₁₄-based mixed-anion solid electrolytes are solved and high ionic conductivities of 1.1 × 10⁻⁴ S cm⁻¹ for Li₂(B₁₁H₁₄)(CB₁₁H₁₂) and 1.1 × 10⁻³ S cm⁻¹ for Li₃(B₁₁H₁₄)(CB₉H₁₀)₂ are obtained, respectively. LiB₁₁H₁₄ exhibits an oxidative stability limit of 2.6 V versus Li⁺/Li and the proposed decomposition products are discussed based on density functional theory calculations. Strategies are discussed to improve the stability of these compounds by modifying the chemical structure of the nido-hydroborate cage. Galvanostatic cycling in symmetric cells with two lithium metal electrodes shows a small overpotential increase from 22.5 to 30 mV after 620 h (up to 0.5 mAh cm⁻²), demonstrating that the electrolyte is compatible with metallic anodes. Finally, the Li₂(B₁₁H₁₄)(CB₁₁H₁₂)  electrolyte is employed in a proof-of-concept half cell with a TiS₂ cathode with a capacity retention of 82% after 150 cycles at C/5.