Gravity consolidation-sedimentation behaviors of concentrated TiO2 suspension

Consolidation-sedimentation behaviors of consolidated sediment under action of gravity were investigated using highly concentrated suspension of titanium dioxide particles under conditions of various pHs, initial heights, and initial concentrations. The average consolidation ratio of the consolidated sediment was analyzed on the basis of the simplified analytical solution obtained using the modified Terzaghi's model under the moving Lagrangian coordinate system. Although the solution pH strongly affects consolidation-sedimentation behaviors, the modified average consolidation coefficient was little influenced by the solution pH. Also, the consolidation coefficient increased in almost direct proportion to the total volume of solids per unit cross-sectional area, which changes the driving force of consolidation-sedimentation due to the overlying weight of the solid particles. The variations with time of the height of the consolidated sediment were adequately described using the analytical solution describing the average consolidation ratio with the aid of the relation that the equilibrium height was represented by a power function of the total volume of solids for a specified pH.     

Interfacial Electrical Properties of Nanodiamond Colloidal Species in Aqueous Medium as Examined by Acid-Base Indicator Dyes

This study was aimed at further examining of a detonated nanodiamond hydrosol, produced by the NanoCarbon Research Institute, Japan. In the concentrated solution, this colloidal system consists mainly of 3 nm-sized primary particles. These particles are positively charged and tend to associate into larger colloidal species on dilution. The species adsorb, first of all, the anionic dyes and readily coagulate on adding electrolytes. Some properties of the sol are changed during prolonged ageing but may be restored by adding small HCl amounts. Besides measuring the electrokinetic potential, the interfacial electrical potential was estimated by using acid-base indicators.     

CO2气体保护的激光焊接12mm厚低碳钢板

采用CO2 作为保护气体消除大熔深激光焊接低碳钢时易发生的气孔问题 ,并对比研究了CO2 和Ar气保护条件下 12mm厚低碳钢板激光焊缝的组织和韧性。焊接试验利用 4kWNd :YAG激光器 ,采用双面深熔焊的方法 ,焊接条件为 4kW激光功率和0 .3 ,0 .5m/min的焊接速度。冲击试验采用一种自行设计的带侧面缺口的三缺口冲击试样 ,以保证断裂全部发生在焊缝。结果表明 ,利用CO2 作保护气体焊接低碳钢板 ,可以有效消除大熔深激光焊接时的气孔问题 ,并获得比Ar气保护下硬度较低 ,冲击韧性高的焊缝。研究工作为解决大功率激光深熔焊时容易发生的气孔问题提供了一条有效途径     

Kinetic studies of hemicellulose hydrolysis of corn stover at atmospheric pressure

The object of this work was to study the xylose production by hydrolysis of corn stover with diluted sulfuric acid at 100 °C. Several concentrations of H₂SO₄ (2%, 4% and 6% w/w) and reaction time (0–300 min) were evaluated. Kinetic parameters of mathematical models for predicting the concentrations of xylose, glucose and furfural in the hydrolysates were found. Optimal conditions for hydrolysis were 5.5% H₂SO₄ at 100 °C for 60 min; under these conditions, 86.7% of xylose yield and 2.82 g/g selectivity were attained, leading to liquors containing up to 18.73 g/l xylose, 6.64 g/l glucose and 0.63 g/l furfural. The models could be successfully used to predict the concentrations of xylose, glucose and furfural within 0–300 min under experimental acid concentrations. Furthermore, the hydrolysis process of corn stover using dilute acid could be conceived as the first stage of an integrated strategy for corn stover utilization.     

Use of solid phase microextraction (SPME) for profiling the volatile metabolites produced by Glomerella cingulata

The profile of volatile organic compounds (VOCs) released from Glomerella cingulata using solid phase microextraction (SPME) with different fibers, Polydimethylsiloxane (PDMS), Polydimethylsiloxane/Divinylbenzene (PDMS/DVB), Carboxen/Polydimethylsiloxane (CAR/PDMS) and Divinylbenzene/Carboxen/Polydimethylsiloxane (DVB/CAR/PDMS), was investigated. C4-C6 aliphatic alcohols were the predominant fraction of VOCs isolated by CAR/PDMS fiber. Sesquiterpene hydrocarbons represented 20.3% of VOCs isolated by PDMS fiber. During the growth phase, Ochracin was produced in the large majority of VOCs. 3-Methylbutanol and phenylethyl alcohol were found in the log phase of it. Alcohols were found in cultures of higher age, while sesquiterpenes were found to be characteristic of initial growth stage of G. cingulata.     

Preparation of 1 1 1-textured BaTiO3 ceramics by templated grain growth method using novel template particles

Dense BaTiO₃ ceramics with 1 1 1-texture were prepared by the TGG process. Platelike BaTiO₃ particles with their 1 1 1 direction perpendicular to the plate face were prepared by the reaction of platelike Ba₆Ti₁₇O₄₀ particles with BaCO₃ particles in molten NaCl. A green compact was composed of the aligned, platelike BaTiO₃ template particles dispersed in the matrix of small, equiaxed BaTiO₃ particles. Sintering caused densification and also the growth of template particles at the expense of matrix particles, resulting in texture development. Densification prior to grain growth was found to be necessary to obtain highly textured ceramics, and the effect of pre-sintering conditions on texture development was examined.     

Catalytic decomposition of biomass tars with iron oxide catalysts

Catalytic gasification of wood (Cedar) biomass was carried out using a specially designed flow-type double beds micro reactor in a two step process: temperature programmed non-catalytic steam gasification of biomass was performed in the first (top) bed at 200–850 °C followed by catalytic decomposition gasification of volatile matters (including tars) in the second (bottom) bed at a constant temperature, mainly 600 °C. Iron oxide catalysts, which transformed to Fe₃O₄ after use possessed catalytic activity in biomass tar decomposition. Above 90% of the volatile matters was gasified by the use of iron oxide catalyst (prepared from FeCl₃ and NH_3aq) at SV of 4.5 × 10³ h^?1. Tar was decomposed over the iron oxide catalysts followed by water gas shift reaction. Surface area of the iron oxide seemed to be an important factor for the catalytic tar decomposition. The activity of the iron oxide catalysts for tar decomposition seemed stable with cyclic use but the activity of the catalysts for the water gas shift reaction decreased with repeated use.     

Evaluation of surfactant-aided degumming of vegetable oils by membrane technology

The first step in the process of vegetable oil refining is degumming, in which phospholipids and mucilaginous gums are removed that otherwise result in a low-grade oil. A membrane process is remarkably simple yet potentially offers many advantages in degumming. Studies were conducted on surfactant-aided membrane degumming with soybean and rapeseed oils in a magnetically stirred flat membrane batch cell with different types of microfiltration membranes. The reduction of phospholipids in soybean oil was in the range of 85.8–92.8% during the membrane process. The phosphorus content of membrane permeates of soybean oil was in the range of 20–58 mg/kg. Crude rapeseed oil contained higher amount of nonhydratable phospholipids and hence resulted in lower reduction in phospholipids, in the range of 66.4–83.2%. Addition of hydratable phospholipids could improve the efficiency of degumming in the membrane process without using any electrolyte, resulting in improvement of quality as well as quantity of the phospholipids.     

High-Temperature Strength and Creep Behavior of Melt-Infiltrated SiC-Mo≤5Si3C≤1 Composites

Molybdenum carbosilicide composites (SiC-Mo_≤5Si₃C_≤1) were fabricated via the melt-infiltration process. The fracture behavior of the composites was studied from room temperature up to 1800°C in 1 atm (∼10⁵ Pa) of argon. The bend strength of the composites slightly increased at ∼1200°C, because of the brittle-ductile transition of the intermetallic phase. The composites retained ∼90% of their room-temperature strength, even at 1700°C. Compressive creep tests were performed over a temperature range of 1760°-1850°C and a stress range of 200–250 MPa. The creep rate of the SiC-Mo_≤5Si₃C_≤1 composites was approximately an order of magnitude higher than that of reaction-bonded SiC.     

局部加压铝合金的凝固变化及其数值模拟

局部加压方法是压铸中用于消除铸件厚壁处缩孔缺陷的一种新工艺.该研究通过试验模型测量局部加压过程中金属型、铸件和加压杆的温度变化曲线,分析了传热与凝固现象.结果表明,局部加压使铸件的凝固时间大为缩短,加压杆前端的温度大幅上升,而金属型的温度则无明显变化.利用变网格技术,根据加压深度通过适时修改网格文件、初始条件和边界条件的方法,模拟了铝合金在局部加压过程中的凝固变化,并与试验结果进行了对比和讨论.