Characterizing image quality of autostereoscopic displays by using the maximum luminance at each viewing position

A metric of the 3D image quality of autostereoscopic displays based on optical measurements is proposed. This metric uses each view's luminance contrast, which is defined as the ratio of maximum luminance at each viewing position to total luminance at that position. Conventional metrics of the autostereoscopic display based on crosstalk, which uses “wanted” and “unwanted” lights. However, in case of the multiple‐views‐type autostereoscopic displays, it is difficult to distinguish exactly which lights are wanted lights and which are unwanted lights. This paper assumes that the wanted light has a maximum luminance at the good stereoscopic viewing position, and the unwanted light also has a maximum luminance at the worst pseudo‐stereoscopic viewing position. By using the maximum luminance that is indexed by view number of the autostereoscopic display, the proposed method enables characterizing stereoscopic viewing conditions without using wanted/unwanted light. A 3D image quality metric called “stereo luminance contrast,” the average of both eyes' contrast, is proposed. The effectiveness of the proposed metric is confirmed by the results of optical measurement analyses of different types of autostereoscopic displays, such as the two‐view, scan‐backlight, multi‐view, and integral.     

Interactions oftrans-cinnamic acid,its related phenolic allelochemicals,and abscisic acid in seedling growth and seed germination of lettuce

Phenolic compounds have been identified as the most common allelochemicals produced by higher plants. Inhibitions of cinnamic acid, its related phenolic derivatives, and abscisic acid (ABA) on seedling growth and seed germination of lettuce were studied.trans-Cinnamic acid, ando-,m-, andp-coumaric acids inhibited the growth of etiolated seedlings of lettuce at concentrations higher than 10^–4 M and seed germination above 10^–3 M. Coumarin inhibited seedling growth and seed germination at 10^–5 M or above. Chlorogenic acid inhibited seedling growth above 10^–4 M, but did not inhibit seed germination at 10^–5–5×10^–3 M. Low concentrations (below 10^–3 M) of caffeic and ferulic acids promoted the elongation of hypocotyls, but higher concentrations (over 10^–3 M) inhibited seedling growth and seed germination. These phenolic compounds and abscisic acid had additive inhibitory effects both on seedling growth and seed germination. The inhibition on lettuce was reversed by caffeic and ferulic acids at concentrations lower than 10^–3 M except for the inhibition of germination by coumarin. These results suggest that in naturetrans-cinnamic acid,o-, m-, p-coumaric acids, coumarin, and chlorogenic acid inhibit plant growth regardless of their concentration. However, caffeic and ferulic acids can either promote or inhibit plant growth according to their concentration.     

Resistance to sulfur poisoning of hot gas cleaning catalysts for the removal of tar from the pyrolysis of cedar wood

In the partial oxidation of tar derived from the pyrolysis of cedar wood, the effect of H₂S addition was investigated over non-catalyst, steam reforming Ni catalyst, and Rh/CeO₂/SiO₂ using a fluidized bed reactor. In the non-catalytic gasification, the product distribution was not influenced by the presence of H₂S. Steam reforming Ni catalyst was effective for the tar removal without H₂S addition, however, the addition of H₂S deactivated drastically. In contrast, Rh/CeO₂/SiO₂ exhibited higher and more stable activity than the Ni catalyst even under the presence of high concentration of H₂S (280 ppm). On the Ni catalyst, the adsorption of sulfur was observed by XPS and Ni species was oxidized during the partial oxidation of tar. In the case of Rh/CeO₂/SiO₂, the adsorption of sulfur was below the detection limit of XPS. This can be related to the self-cleaning of catalyst surface during the circulation in the fluidized bed reactor for the partial oxidation of tar derived from cedar pyrolysis.     

Effects of dietary lipids on daunomycin-induced nephropathy in mice: comparison between cod liver oil and soybean oil

Although it is well known that dietary lipids affect the course of glomerulonephritis in rats and humans, the precise mechanisms involved have not been fully elucidated. The aim of this study was to investigate the effects of different types of dietary lipids (fish oil and vegetable oil) on daunomycin (DM)-induced nephropathy in mice fed on soybean oil (SO) or cod liver oil (CLO). Urinary protein excretion, serum albumin, creatinine, total cholesterol, and TG were measured, and glomerular histological changes were evaluated. Antioxidant enzymes were also measured, along with the levels of lipid peroxide, GSH, thromboxane (Tx) B_2′ and 6-keto prostaglandin F_1α in renal cortical tissue. Dietary CLO significantly reduced urinary albumin excretion and ameliorated the histological changes induced by DM. The increase of tissue lipid peroxide levels seen in SO-fed mice was suppressed in CLO-fed mice, whereas CLO-fed mice showed higher GSH levels than SO-fed mice throughout the experiment. In addition, renal tissue GSH peroxidase activity was significantly higher at 72 h after DM injection in CLO-DM mice than in SO-DM mice. Both renal cortical TxB₂ and 6-keto PGF_1α levels were significantly lower in CLO-DM mice than in SO-DM mice. These results suggest that inhibition of oxidative damage by dietary CLO played an important role in the prevention of DM nephropathy in this mouse model. The effect of CLO was closely associated with the inhibition of Tx synthesis.     

Higher-order structures and mechanical properties of stereocomplex-type poly(lactic acid) melt spun fibers

Equimolar blend of poly(l-lactic acid) (PLLA) and poly(d-lactic acid) (PDLA) was melt spun into fibers and the relations among the processing conditions, crystalline structures, thermal properties, and mechanical properties were investigated. Drawing and annealing were performed in order to obtain fiber mainly consisting of the stereocomplex crystal phase. Fibers drawn at various temperatures exhibited either amorphous, highly oriented homo crystal, or the mixture of homo and stereocomplex with a fairly low orientation depending on the drawing temperature. Annealing of the drawn fibers at an elevated temperature higher than the melting temperature of homo crystal increased the stereocomplex content significantly. The fractions of the homo and the stereocomplex crystals strongly depended on the higher-order structure of the drawn fibers and the annealing temperature.     

Application of silica-containing nano-composite emulsion to wall paint: A new environmentally safe paint of high performance

A new emulsion-type paint was prepared by utilizing a nano-composite emulsion (NCE), which contained nano-size particles (ca. 60 nm in diameter) consisting of silica (inorganic core, ca. 30 nm in diameter) and polyacrylate (organic shell), and evaluated as wall paint. By applying NCE for the wall paint, about 35 wt.% of the organic content in the paint could be reduced in comparison with the commodity emulsion-type paint, which is highly effective to save the petroleum resources. The basic properties of the white NCE paint film on gloss, surface hardness, adhesion, and solvent resistance were evaluated and compared with those of acrylic emulsion-type paints as well as those of silica-containing paints which were prepared simply by blending the acrylic emulsion with silica sol. The NCE paint was especially excellent in solvent resistance. Then the practical tests were performed to evaluate its appropriateness as wall paint, which clarified the excellent antipollution property and the high flame resistance of the NCE paint.     

Phase Formation and Microstructure of Titanium Oxides and Composites Produced by Thermal Plasma Oxidation of Titanium Carbide

The phase formation and microstructure of titanium oxides and composites produced by Ar–O₂ thermal plasma oxidation of titanium carbide powders were investigated in detail by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Relationships between the phase compositions and microstructures of the oxides were established by combined structural and phase analyses, in correlation with synthesis conditions and phase formation mechanisms. It is revealed that vapor condensation favored the formation of anatase, which existed as smaller particles, while liquid/solid oxidation favored the formation of rutile, which appeared as larger particles or composites. A higher oxygen input in the plasma gases (Ar + O₂) enhanced the formation of anatase due to impeded oxidation and evaporation. A small amount of Ti₄O₇ and Ti₃O₅ was detected in the larger particles coexisting with rutile or TiC. These suboxides were formed as intermediates in solid oxidation of TiC or precipitated from the Ti–C–O melt during cooling. Furthermore, extensive cracks, dislocations and stresses were observed in the monolithic rutile and composites, in association with the rapid quenching in this high-temperature in-flight oxidation process.     

Association and physical gelation of ABA triblock copolymer in selective solvent

Association behavior and physical gelation mechanism of ABA triblock copolymer dissolved in B-selective solvent have been studied systematically from dilute to moderately concentrated solutions. Static and dynamic light scattering and nuclear magnetic resonance measurements for dilute solutions of poly(methyl methacrylate)-block-poly(tert-butyl acrylate)-block-poly(methyl methacrylate) (PMMA-PtBuA-PMMA) in 1-butanol (PtBuA selective solvent) indicated that PMMA-PtBuA-PMMA chains are molecularly dissolved above 50 °C. With decreasing temperature, the triblock copolymers form associated micelles consisting PMMA associated core and PtBuA shell. Linear dynamic viscoelastic measurements for solutions with moderate concentration (3.9-12.0 wt%) revealed that the system was viscous sol state at 60 °C. Drastic increase of shear storage modulus (G′) occurred with decreasing temperature, and at 25 °C, G′ showed rubbery plateau with weak frequency dependency, means the formation of elastic physical gel. The consistency between the temperature for micelle formation and that at the increase in G′ indicates that the physical gelation is owing to the network formation as the result of the association of PMMA chains and the bridging PtBuA chains connecting the PMMA cores. Master curves for the dynamic moduli were derived by time-temperature superposition along the frequency axis. Just above sol-gel transition concentration (C_gel), the master curves suggest the existence of fairy amount of aggregate that is not incorporated in the macroscopic network. With the increase in polymer concentration, the master curves become to reveal Maxwell-type viscoelasticity with narrow relaxation time distribution, suggesting the formation of transient network with easily generation and destruction of crosslinks. Concentration dependency of the plateau modulus is stronger than the theoretically expected, means the macroscopic transient network grows with polymer concentration by increasing the fraction of elastically effective bridging PtBuA chain above C_gel.     

A facile antistatic modification of polyester fiber based on ion-exchange reaction of sulfonate-modified polyester and various cationic surfactants

A new technique for imparting antistatic properties to poly(ethylene terephthalate) (PET) fiber has been developed. In this technique, blend polyester fibers containing poly(ethylene terephthalate/5-sulfoisophthalate) (SIP-PET) were prepared by blend spinning and then treated with various cationic surfactants in the process of dyeing. The surfactants could effectively be immobilized on the fiber as the counter cations of the sulfonate groups of the 5-sulfoisophthalate (SIP) units and aid the release of static electrons formed in the fiber. Thus, the half-life time (t_1/2) of leakage of static charge and the surface resistivity (Rs) of the blend PET fibers became much lower after treating. The best result was obtained with a methylated quaternary ammonium salt of a stearylamine-ethylene oxide (EO) adduct or hydrochloride of a laurylamine-EO adduct as the surfactant of which the number of EO units was around ten. Even after five washing cycles the t_1/2 value of the fibers treated with these surfactants was kept lower than 30 s with the Rs value maintained in the order of 10¹³ Ω cm^-2. Therefore, the present technique could be useful for practical production of polyester fibers with “semi-permanent” antistatic properties which can be recovered by re-treatment even if they were lost.