Synthesis and Sintering of Cerium(II) Monosulfide

Cerium monosulfide (CeS) powder was synthesized by the reduction of Ce₂S₃ powder with metallic Ce, which was obtained from ceria (CeO₂) powder using carbon disulfide (CS₂) gas. To obtain the maximum amount of CeS from a mixture of Ce₂S₃ and Ce, an excess amount of metallic Ce, a stoichiometric composition, was necessary in the synthesis at 1273 K for 10.8 ks. The preliminary sintering experiments also were performed using a synthetic CeS powder containing a small amount of Ce, Ce₂O₂S, and β-Ce₂S₃ as impurities. It was found that the oxygen content in the sintered compact decreases gradually as the sintering temperature increases, because of the removal of the impurities due to the evaporation of the volatile CeO. Single-phase CeS was formed by sintering at 2173 K. To evaluate the activation energy for densification of single-phase CeS, a CeS powder was prepared by milling an initial sintered compact and was used as an ingredient for hot-press experiments. Densification data during hot-press sintering were analyzed using a kinetic equation, showing that boundary diffusion is a rate-limiting process. The results suggest that this boundary diffusion model can explain well the densification data, with an apparent activation energy of 479 kJ·mol^-1.     

Effect of polymer density on polyethylene hollow fiber membrane formation via thermally induced phase separation

Microporous high‐density polyethylene (HDPE) and low‐density polyethylene (LDPE) hollow fiber membranes were prepared from polyethylene–diisodecyl phthalate solution via thermally induced phase separation. Effect of the polyethylene density on the membrane structure and performance was investigated. The HDPE membrane showed about five times higher water permeability than the LDPE membrane because it had the larger pore and the higher porosity at the outer membrane surface. The formation of the larger pore was owing to both the initial larger structure formed by spinodal decomposition and the suppression of the diluent evaporation from the outer membrane surface due to the higher solution viscosity. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 471–474, 2004     

Reduced Thermal Budget Process for SBT Thin Film in Planer Type Stack Cell FeRAMs

In order to reduce the thermal budget for SBT crystallization process in planer type stack cell FeRAMs, Rapid Thermal Anneal (RTA) based process for SBT thin film was investigated. Our new process is characterized by crystallization in RTA without any furnace annealing process, and includes a low temperature recovery annealing process (hereafter RTB (Reduced Thermal Budget) process). As a result of only 750C RTA for accumulated time of 60s without furnace annealing process, the sufficient ferroelectric properties were derived in comparison with that of conventional SBT thin film. In the RTB process, two approaches to improve the break down voltage were carried out. First, we used UV exposure during the baking process. By optimizing the UV assisted baking process, a high break down field due to smooth surface morphology was successfully obtained, resulting in break down field of more than 1.2 MV/cm. Secondly, ultra thin SBT films as a top few layer on the base SBT thin film were employed. After optimization of the ultra thin SBT layer thickness, a very smooth SBT surface was successfully achieved, resulting in improvement of the break down field of more than 1.1 MV/cm.     

Improvement in D-E Hysteresis Curve Squareness of PZT Thin Films—Effect of Oxygen Partial Pressure in High-Pressure Post-Annealing

A high-pressure annealing was applied to a post-annealing process for sol-gel derived PZT thin films. The squareness of D-E hysteresis curves changes depending on both total pressure and oxygen concentration. Moreover, the change follows the product of the total pressure and the oxygen concentration, which correspond to oxygen partial pressure P_O2. Where the P_O2 is higher than 0.03 MPa, few of the squareness of the hysteresis curve are excellent. The squareness of the hysteresis curves dramatically improve as the P_O2 decreases. Where the P_O2 is lower than 0.01 MPa, the squareness deteriorates slightly. These changes in the D-E hysteresis curves are thought to be explained by the generation of lead and oxygen vacancies as a function of the P_O2.     

Single-Component Pheromone Consisting of Bombykal in a Diurnal Hawk Moth, <Emphasis Type="Italic">Neogurelca himachala sangaica</Emphasis>

Recent work has suggested that hawk moths share pheromone components but are sexually separated by qualitative and quantitative differences in their pheromone blends. During field assays on the sex pheromones of other species, a diurnal hawk moth, Neogurelca himachala sangaica (Lepidoptera: Sphingidae), was frequently captured, but the composition of the sex pheromone of this species was not known. Analysis of hexane extracts of the pheromone glands of calling female by gas chromatography (GC) using an electroantennographic detector (EAD) revealed two components that elicited EAD responses from male moth antennae. These components were identified by their mass spectra and retention indices on two GC columns as (10E,12Z)-10,12-hexadecadienal (E10,Z12–16:Ald) and a trace of its (10E,12E)-isomer (E10,E12–16:Ald) in 98:2 ratio. In field experiments, E10,Z12–16:Ald alone attracted male moths, and addition of E10,E12–16:Ald significantly reduced the attractiveness, even at the naturally-occurring ratio. Analysis of the data using a generalized linear mixed model showed that E10,Z12–16:Ald positively contributed to attractiveness, whereas E10,E12–16:Ald did so negatively, and it was concluded that the sex pheromone of N. himachala sangaica consists solely of E10,Z12–16:Ald, bombykal. The negative effect of E10,E12–16:Ald on attractiveness could promote the species-specificity of this single-component pheromone system.     

MRF-based texture segmentation using wavelet decomposed images

In recent textured image segmentation, Bayesian approaches capitalizing on computational efficiency of multiresolution representations have received much attention. Most of the previous researches have been based on multiresolution stochastic models which use the Gaussian pyramid image decomposition. In this paper, motivated by nonredundant directional selectivity and highly discriminative nature of the wavelet representation, we present an unsupervised textured image segmentation algorithm based on a multiscale stochastic modeling over the wavelet decomposition of image. The model, using doubly stochastic Markov random fields, captures intrascale statistical dependencies over the wavelet decomposed image and intrascale and interscale dependencies over the corresponding multiresolution region image.     

Satellite data visualization system for education

It is important for environment protection to monitor changes in the environment by natural and human causes. It is also important to educate the next generation on the importance of the global environment issues. Recently, it has become possible to continually monitor the global environment using various satellite sensor data. But these satellite data are used for highly specialized analysis by experts in such fields, and the data cannot easily be used by non-experts. In this paper, we propose a satellite data visualization system for educational use. In the proposed system, a gray-scale 2-dimensional image is created from the satellite data. Next, a pseudo-color image is created from the gray-scale image to assist the comprehension of the data. A 3-dimensional data representation of the image is also created, to assist the comparison of the individual data. The aim of the created image is for educational use, and the image is created with emphasis on comprehension of the data, rather than presentation of data details. The aim of the proposed system is presenting the satellite data visually so that non-experts can easily understand. The target of this research is to apply the proposed system for natural science education and to improve the awareness of global environmental issues.     

A control method with pheromone information for a transport system

Since the control methods of a transport system between processing machines are specialized for each layout of the system, it is difficult to design prompt schedules and control logic for new complicated systems, especially in cases of machine faults or restructuring the system to modify the layout. In this article, we describe a multiagent transport control system which utilizes pheromone information. Each element of the system acts as an agent and estimates the appropriate path and time to drive out the products using information obtained by communication with other elements as well as pheromone information deposited on the tracks of the products.     

Navigation system for an autonomous robot using an ocellus camera in an indoor environment

Autonomous and mobile robots are being expected to provide various services in human living environments. However, many problems remain to be solved in the development of autonomous robots that can work like humans. When a robot moves, it is important that it be able to have self-localization abilities and recognize obstacles. For a human, the present location can be correctly checked through a comparison between memorized information assuming, it is correct, and the present situation. In addition, the distance to an object and the perception of its size can be estimated by a sense of distance based on memory or experience. Therefore, the environment for robotic activity assumed in this study was a finite-space such as a family room, an office, or a hospital room. Because an accurate estimation of position is important to the success of a robot, we have developed a navigation system with self-localization ability which uses only a CCD camera that can detect whether the robot is moving accurately in a room or corridor. This article describes how this system has been implemented and tested with our developed robot.     

Impact of Multimedia Traffic Characteristics on ATM Network Configuration

This paper proposes a new topological designmethod, named BXCQ, which optimizes logical networkconfiguration while guaranteeing Quality-of-Service(QoS) requirements for each service class in an ATMnetwork. The BXCQ method determines the optimum logicalnetwork topology associated with each service class soas to minimize network cost. In our previously proposedFull-Net architecture these different logical topologies can be suitably mapped at the sametime on the same ATM physical network by using theVirtual Channel Handler (VCH) to create differentlogical interconnection networks. The BXCQ method allows us to clarify the relations between multimediatraffic characteristics and desirable logical networkconfigurations in Full-Net. Evaluation results suggestthat a service class that is bursty, delay tolerant, and cell loss sensitive with small demandshould be supported by a loop-like topology. This studywill be useful for designing flexible and cost-effectivemultimedia networks that can also adapt to not-yet-known services.