Design and performance of a punch mechanism based pellet injector for alternative injection in the large helical device

A low speed single barrel pellet injector, using a mechanical punch device has been developed for alternative injection in the large helical device. A pellet is injected by the combined operation of a mechanical punch and a pneumatic propellant system. The pellet shape is cylindrical, 3 mm in diameter and 3 mm in length. Using this technique the speed of the pellet can be controlled flexibly in the range of 100-450 m/s, and a higher speed can be feasible for a higher gas pressure. The injector is equipped with a guide tube selector to direct the pellet to different injection locations. Pellets are exposed to several curved parts with the curvature radii R(c) = 0.8 and 0.3 m when they are transferred in guided tubes to the respective injection locations. Pellet speed variation with pressure at different pellet formation temperatures has been observed. Pellet intactness tests through these guide tubes show a variation in the intact speed limit over a range of pellet formation temperatures from 6.5 to 9.8 K. Pellet speed reduction of less than 6% has been observed after the pellet moves through the curved guide tubes.     

Thermal management of edge‐lit wide color gamut backlight for LCD using red laser diodes and cyan LEDs

The color gamut is one of the critical parameters that dictate the image quality of displays. The liquid crystal displays using white color light‐emitting diodes (LEDs) as the backlight, though having been widely employed recently, are not very satisfactory in terms of their color gamut because of the broad spectrum inherent to white LEDs. This prompted the authors to develop improved liquid crystal displays using an edge‐lit wide color gamut backlight that used red laser diodes and cyan LEDs. Generating laser beams with high color purity, the laser diodes are light sources with a significant effect on expanding the color gamut. However, laser diodes, red ones in particular, have unfavorable thermal characteristics. To cope with this shortcoming, the authors clearly defined the restrictive criteria for laying out two kinds of light source on the edge‐lit backlight and made a prototype 55‐type laser backlight for performance evaluation.     

Emergency response to the nuclear accident at the Fukushima Daiichi Nuclear Power Plants using mobile rescue robots

On March 11, 2011, a massive earthquake (magnitude 9.0) and accompanying tsunami hit the Tohoku region of eastern Japan. Since then, the Fukushima Daiichi Nuclear Power Plants have been facing a crisis due to the loss of all power that resulted from the meltdown accidents. Three buildings housing nuclear reactors were seriously damaged from hydrogen explosions, and, in one building, the nuclear reactions became out of control. It was too dangerous for humans to enter the buildings to inspect the damage because radioactive materials were also being released. In response to this crisis, it was decided that mobile rescue robots would be used to carry out surveillance missions. The mobile rescue robots needed could not be delivered to the Tokyo Electric Power Company (TEPCO) until various technical issues were resolved. Those issues involved hardware reliability, communication functions, and the ability of the robots' electronic components to withstand radiation. Additional sensors and functionality that would enable the robots to respond effectively to the crisis were also needed. Available robots were therefore retrofitted for the disaster reponse missions. First, the radiation tolerance of the electronic componenets was checked by means of gamma ray irradiation tests, which were conducted using the facilities of the Japan Atomic Energy Agency (JAEA). The commercial electronic devices used in the original robot systems operated long enough (more than 100 h at a 10% safety margin) in the assumed environment (100 mGy/h). Next, the usability of wireless communication in the target environment was assessed. Such tests were not possible in the target environment itself, so they were performed at the Hamaoka Daiichi Nuclear Power Plants, which are similar to the target environment. As previously predicted, the test results indicated that robust wireless communication would not be possible in the reactor buildings. It was therefore determined that a wired communication device would need to be installed. After TEPCO's official urgent mission proposal was received, the team mounted additional devices to facilitate the installation of a water gauge in the basement of the reactor buildings to determine flooding levels. While these preparations were taking place, prospective robot operators from TEPCO trained in a laboratory environment. Finally, one of the robots was delivered to the Fukushima Daiichi Nuclear Power Plants on June 20, 2011, where it performed a number of important missions inside the buildings. In this paper, the requirements for the exploration mission in the Fukushima Daiichi Nuclear Power Plants are presented, the implementation is discussed, and the results of the mission are reported.     

Micromachining of electroformed nickel mold using thick photoresist microstructure for imprint technology

In order to fabricate polymer-based microstructures with feature sizes on the order of micrometers, we have been developing a microimprint technology with a fine nickel (Ni) mold instead of a conventional photolithography technique. The Ni mold was successfully fabricated by electroforming using a positive thick photoresist microstructure patterned on a silicon substrate as a replication master. The photoresist microstructure with excellent edge quality can be obtained under irradiation with single wavelength (g line) selected from a high-pressure mercury lamp. In addition, its sidewall angle in the range of 65° to 84° can be controlled precisely by varying the distance between a photomask and a photoresist surface. On the structured photoresist master, Ni was electroplated up to a thickness of about 110 μm, and then removed from the master. In this process, two-step electroplating at different current densities was carried out in order to prevent deformation of the photoresist master due to stress generated in a Ni electrodeposit. With the Ni mold, fine patterns with a width of 10 or 30 μm and a depth of 24 μm were almost completely transferred to polymetric materials (PMMA). The geometrical dimensions of the fabricated PMMA microstructures were found to be only about 10% reduction against the Ni mold.     

Remarks on the tracking method of neural network weight change for a learning-type neural network feed-forward feed-back controller

Although many neural network controllers have been proposed, we still have to tune several parameters of neural networks in order to obtain a better learning performance in practical applications. Our tracking method provides a new aspect of this tuning of neural network parameters. It has been applied to adaptive and learning-type neural network direct controllers, and an adaptive-type neural network feed-forward feed-back controller. This work applied it to a learning-type neural network feed-forward feed-back controller. Simulation results confirmed its usefulness, and we discuss a transformation of the track on a 2D plane to one-dimensional values.     

Relaxation of the mouse pubic symphysis during late pregnancy is not accompanied by the influx of granulocytes

In some animals, such as mice and guinea pigs, a hormonally controlled mechanism increases the flexibility of the pubic symphysis and enhances the cervical remodeling necessary for safe delivery. Cervical ripening during pregnancy is associated with a paradoxical influx of leukocytes. However, the changes in cell metabolism during relaxation of the mouse pubic symphysis for delivery have not been extensively studied. In this work, we used light microscopy and transmission and scanning electron microcopy, as well as immunohistochemistry and Western blotting for MMP-8, to investigate the involvement of granulocytes or resident stromal cells in the relaxation of the virgin pubic symphysis during late pregnancy (days 18 and 19, before delivery) in vivo and in explanted joints. MMP-8 was studied because this collagenase is a hallmark for cervical ripening associated with the influx of granulocytes during late pregnancy. Extensive dissolution and disorganization of the extracellular matrix was seen around fibroblastic-like cells in late pregnancy. In contrast to the cervix (positive control), morphological and immunohistochemical analyses revealed that there was no characteristic cellular inflammatory response in the interpubic tissue. Staining for MMP-8 was observed in chondroid and fibroblastic-like cells of virgin and relaxed interpubic ligament, respectively. However, no granulocytes were seen during the extensive remodeling of the pubic joint in late pregnancy. These results indicate that constitutive stromal cells may have an important role in tissue relaxation during remodeling of the pubic symphysis in pregnancy.     

Manic-depressive symptom associated with endocrine and metabolic disorders

In an attempt to study "manic-depressive" affairs associated with endocrine and mental disorders, our clinical data are analyzed before and after appropriate treatment in Cushing's disease, Cushing's syndrome, hyperthyroid Graves' disease and primary hypothyroidism. Although our data do not provide definite findings on manic-depressive affairs associated with Cushing's disease and syndrome, review data by others indicated a high incidence of depression under untreated condition and its disappearance after appropriate treatment. In contrast, patients with adrenocortical insufficiency did have a depression but this was cleared after supplemental therapy. In hyperthyroid Graves' disease, a number of emotional and mental instability and irritability were noticed before the treatment, but these abnormalities all disappeared after appropriate treatment for 3-6 months. In contrast, patients with primary hypothyroidism did show lethargy and apathy, and these abnormalities disappeared after appropriate treatment. From the data accumulated, it is concluded that adrenal steroid and thyroid hormone do affect the functions of nervous system and, as a result, cause a number of clinical symptoms. The exact biochemical processes underlying these abnormalities are not known and remains for further investigations.     

Single-crystal growth and anisotropic electrical properties of (La1?xCax)2CaCu2O6

Large single crystals of (La_1–x Ca _x )₂CaCu₂O₆ were synthesized by the travelling solvent floating zone (TSFZ) technique. The dimension of the grown boules was typically 4 mm×30 mm long with thec-axis perpendicular to the growth direction. After oxygen loading at 1080°C in 400 atm of O₂, they became superconductive with a sharp transition at around 50 K. The resistivity was metallic both along thec-axis and within theab-plane, with an anisotropy ratio of ²( _c/ _ab ) 50 which is almost independent of temperature. Details of the crystal growth, heat treatment procedures, and the results of electrical and magnetic property measurements are presented.     

Significant reduction of medical costs by differentiation therapy with all-trans retinoic acid during remission induction of newly diagnosed patients with acute promyelocytic leukemia. The Japan Adult Leukemia Study Group

OBJECTIVE: For resuscitation of hemorrhagic hypovolemia, we compared the effectiveness of (1) isotonic lactated Ringer's solution (LRS), (2) 2400 mOsm of 7.5% NaCl:6% dextran 70 (HSD), and (3) 2400 mOsm of 7.9% sodium acetate:1.9% NaCl:6% dextran 70 (HAD). DESIGN: In six randomized, blinded experiments for each solution, conscious instrumented adult sheep were hemorrhaged by removing approximately 1.8 L (42 +/- 3 mL/kg) of blood, while maintaining the mean arterial pressure (MAP) at 50 mm Hg for 2 hours. METHODS: Test solutions were infused as needed to restore the cardiac index to baseline. RESULTS: Volume requirements with HAD (236 +/- 29 mL) and HSD (244 +/- 39 mL) were significantly less (p < 0.05) than LRS (3463 +/- 234 mL). Mean arterial pressure was normalized with HSD and LRS, but not with HAD, which resulted in MAPs of 20 to 25 mm Hg less than baseline resulting from a reduced peripheral resistance. Oxygen delivery, however, was significantly higher with HAD during the resuscitation period. Acid-base balance (pH) and oxygen consumption were normalized within 5 minutes of infusion only with HAD. CONCLUSIONS: Small-volume infusion with HAD resulting in "high-flow-low-pressure" resuscitation may offer unique hemodynamic and metabolic advantages for the initial treatment of hemorrhage from trauma.     

High-rate Decoupled Water Electrolysis System Integrated with α-MoO3 as a Redox Mediator with Fast Anhydrous Proton Kinetics

Hydrogen is a promising alternative to fossil fuels that can reduce greenhouse gas emissions. Decoupled water electrolysis system using a reversible proton storage redox mediator, where the oxygen evolution reaction and hydrogen evolution reaction are separated in time and space, is an effective approach to producing hydrogen gas with high purity, high flexibility, and low cost. To realize fast hydrogen production in such a system, a redox mediator capable of releasing protons rapidly is required. Herein, α-MoO₃, with an ultrafast proton transfer property that can be explained by a dense hydrogen bond network in the lattice oxygen arrays of HxMoO₃, is examined as a high-rate redox mediator for fast hydrogen production in acidic electrolytes. The α-MoO₃ redox mediator shows both a large capacity of 204 mAh g⁻¹ and fast hydrogen production at a current rate of 10 A cm⁻²(≈153 A g⁻¹), outperforming most of the previously reported solid-state redox mediators.