Lipase-catalyzed alcoholysis of triglycerides for short-chain monoglyceride production

Lipase from Pseudomonas fluorescens efficiently catalyzed the alcoholysis of various TG in dry alcohols. For TG with short-chain FA, more MG were accumulated. The yields of MG were affected by the alcohols used. The maximum yields of MG were as follows: 85% for monoacetin in n-butanol, 96% for monobutyrin in ethanol or n-butanol, 50% for monocaprylin in n-butanol, 48% for monolaurin in isopropanol, and 45% for monopalmitin in isopropanol. The MG produced were judged to be 2-MG by TLC analysis. The presence of organic cosolvent affected the reaction rate of the lipase-catalyzed alcoholysis of TG. For the alcoholysis of various TG in ethanol and cosolvent (1∶1, vol/vol), the rates had the following orders: (i) for tributyrin, hexane > toluene > acetone > ethyl acetate > chloroform > acetonitrile > pyridine; (ii) for tricaprylin, hexane > acetone > toluene > acetonitrile > ethyl acetate > pyridine > chloroform; and (iii) for trialurin, hexane > acetonitrile=acetone > ethyl acetate > pyridine=chloroform > toluene.     

Corrosion-resistant lightweight metallic bipolar plates for PEM fuel cells

Corrosion resistant treated metal bipolar plates with higher rigidity and electrical conductivity than graphite were developed and tested for PEM fuel cell applications. Six replicas of single cells were used three of which were made of graphite composites bipolar plates and the other three of the treated metallic plates. A Membrane Electrode Assembly (MEA) with 5.55 cm² active electrode areas, 0.3 mg cm^–2 Pt loading and Nafion membrane 115 was fitted to each cell and operated under identical conditions. The experimental testing was conducted at room temperature (20 °C). The average value of the data obtained for the three graphite cells was plotted. Similarly, the average value of the data obtained for the three treated metal cells was plotted on the same graph for comparison. Generally, the treated metal bipolar plate provided at least 12% saving in hydrogen consumption in comparison to graphite. This is attributed to the lower bulk and surface contact resistance of the metal used in this study in relation to graphite. The results of lifetime testing, conducted at room temperature under variable loading showed no indication of power degradation due to metal corrosion for at least 1500 hours.     

Biochemical,functional, and histochemical effects of essential fatty acid deficiency in rat kidney

The present study was designed to examine the effects of EFA deficiency (EFAD) on biochemical, functional, and structural aspects of the kidney in growing and adult rats fed a normal or EFAD diet for 9 wk after weaning. Food and fluid intake (FI), urine volume, and Na⁺ and K⁺ excretions were measured weekly from weeks 4 to 8 by placing the rats in individual metabolic cages for 24 h. At week 9, Li⁺ and a 5% water load, respectively, were administered at 14 and 1.5 h prior to glomerular and proximal tubular function studies, as assessed by 3-h creatinine (C_Cr) and Li⁺ (C_Li+) clearances. Hematocrit and urine volume; serum and urine [Cr], [Li⁺], [Na⁺], and [K⁺]; and renal FA distribution were also measured. Data [corrected to 100 g/body weight (bw) and presented as means ±SEM] were significant, at P<-0.05. Despite a similar ingestion of solids from weeks 4 to 7 (weeks 7 to 10 of life), the rats on the EFAD diet showed a decreased body weight from week 5. From weeks 4 to 8, Fl and urine volume were similar for both groups, but the Fl increased at week 6 in the EFAD group; 24-h Na⁺ and K⁺ excretions were similar at all weeks, except for an increase in the EFAD group for both ions at week 7. In the EFAD group, C_Cr and C_Li+ decreased by 27 and 56.3%, respectively (385.7±33.4 vs. 280±21.1, and 21.0±2.1 vs. 9.2±1.1 μL/min/100 g; n=9 vs. 10), the latter result suggesting increased proximal reabsorption. The 3-h Na⁺ and K⁺ excretions were similar, but the Li⁺ decreased (0.78±0.06×10⁻² vs. 0.32±0.03×10⁻² μeq/min/100 g) in the EFAD group, giving additional support to the suggestion. Renal structure was normal and similar for both groups, but the EFAD group showed a more prominent proximal tubule brush border, together with heavier periodic acid-Schiff staining in all specimens from weeks 5 to 9. In the EFAD group, FA of the n−9 and n−7 series were higher, but most of the n−6 series were lower as a percentage of total lipids in the medulla and cortex. Medullary levels of 20∶4n−6 were maintained, 22∶4n−6 declined twice, arachidonic acid was maintained, and 20∶5n−3 was lower. The EFAD diet affected glomerular function, proximal tubular structure and function, and FA distribution in the rat kidney.     

<Emphasis Type="Italic">In situ</Emphasis> monitoring of solid fat content by means of pulsed nuclear magnetic resonance spectrometry and ultrasonics

An ultrasonic technique was developed to study the crystallization process of edible fats on-line. A chirp wave was used instead of the conventional pulser signal, thus achieving a higher signal-to-noise ratio. This enabled measurements to be made in concentrated systems [≈20% solid fat content (SFC)] through a 8.11-cm thick sample without significant signal loss. Fat samples were crystallized at 20, 25, and 30°C at a constant agitation rate of 400 rpm for 90 min. The crystallization process was followed by ultrasonic spectroscopy and a low-resolution pulsed nuclear magnetic resonance spectrometer. Specific relationships were found between ultrasonic parameters [integrated response, time of flight (TF), and full width half maximum] and SFC. TF, which is an indirect measurement of the ultrasonic velocity (v), was highly correlated to SFC (r ²>0.9) in a linear fashion (v=2.601 SFC+1433.0).     

Hydrolysis of poly(acrylamide)–starch graft copolymer

Poly(acrylamide)–starch graft copolymer was treated independently with sodium hydroxide and different acid solutions. The different acids include phosphoric, hydrochloric, and sulphuric acid. The treatment was carried out under a variety of conditions including sodium hydroxide concentration, time, and duration of hydrolysis as well as type of acid used. The extent of hydrolysis was assessed by estimating amide and carboxyl content as well as the acrylate and starch content before and after treatment. It was found that the increment in carboxyl content is equal to the decrement in amide on using sodium hydroxide concentration up to 1N, while using higher concentration than 1N leads to a difference in formed carboxyl and decreased amide groups. The magnitude of this difference depends on sodium hydroxide concentration as well as temperature and duration of hydrolysis. The maximum value of carboxyl content obtained was 593 meq/100 g sample. The acidic treatment of the starch copolymer does not affect the conversion of amide groups to carboxyl groups, and the sole effect was hydrolysis of starch component of the copolymer. Evaluation of the alkali-treated copolymer as cation exchanger was carried out. The absorption efficiency % of different cations depends on the associated anions and follow the order: Cu²⁺ > Zn²⁺ > Co²⁺ > Mg²⁺. © 1995 John Wiley & Sons, Inc.     

Bi_4Ge_3O_(12):TR(TR=Pr,Eu,Ce)晶体的吸收和发光光谱

测量了Bi_4Ge_3O_(12)(BGO):Pr、Eu和Ce的吸收、激发和发光光谱。掺杂BGO吸收和激发带相应于pr~(3+)、Eu~(3+)和Ce~(3+)离子特征跃迁。Xe灯中不同波长激发所得到掺杂BGO的发光光谱可通过Bi~(3+)心和掺杂材料之间能量传输过程加以解释。Bi~(3+)心400—600mm发射强度因受到Ce杂质影响变弱,这现象在高Ce浓度晶体里更为显著。     

Effect of retempering with superplasticizer admixtures on slump loss and compressive strength of concrete subjected to prolonged mixing

To have concrete possesses the specified engineering properties, its slump loss has to be compensated somehow at construction site so that concrete could be placed and compacted properly. Several attempts have been tried so far to render concrete workable at construction site including starting with a high initial slump at the stationary plant, or retempering with water and/or with chemical admixtures at construction site. In this investigation, ASTM C 494 Type F superplasticizer was used for retempering concrete to restore its initial slump. Concrete mixes having an initial slump of about 19 cm were prepared and subjected to prolonged mixing with different mixing duration such as 30, 60, 90, 120, and 150 min following an initial mixing of 5 min to ensure homogeneity. At the end of each mixing period, cube specimens of 15 cm were cast from concrete retempered to its initial slump level and tested at the age of 28 days for compressive strength. Results revealed that compared to the concrete retempered with water, those retempered with a superplasticizer admixture have yielded significantly higher strength regardless of the mixing duration.     

Computational fluid dynamics (CFD) analysis and experimental study for toxic hazardous waste destruction in the cavity incinerator

We undertook numerical and experimental studies to develop a better incineration method for the destruction of CC1₄. A phenomenological model for the turbulent reaction of CC1₄, including a flame inhibition feature, has been successfully incorporated into a commercial code, simulating the incineration processes of this compound. The gaseous flow solution was obtained using SIMPLEST, a derivative of Patankar’s SIMPLE algorithm, with a k-ε turbulence model. A modified fast chemistry turbulent reaction model was developed to describe the flame inhibition due to the presence of CC1₄, considering the corresponding burning velocity data of these mixtures. An experiment was carried out on a 5.2 kW laboratory scale, transportable, cavity-type incinerator, which warrants a sufficient residence time and effective turbulent mixing by the formation of a strong recirculation region in a combustor. To this end, the specific configuration of the incinerator was manufactured to consist of two opposing jets and a rearward facing step. The calculated data were in close agreement with the experimental data for the concentrations of major species, such as CCI₄ and HCl, together with the temperature profiles. The experimental test gave the desired DRE of above 99.99%.     

γ‐Irradiation effects on the thermal and structural characteristics of modified,grafted polypropylene

The effects of both the degree of grafting and γ irradiation on the thermal stability and structural characteristic of polypropylene‐graft‐polyvinylpyrrolidone and polypropylene‐graft‐polyvinylpyrrolidone modified with α‐cyano‐δ‐(2‐thienyl) crotononitrile were investigated. The employed techniques were thermogravimetric analysis, differential thermogravimetry, and X‐ray diffraction. The thermal stability of various polymeric substrates was investigated through the determination of the degradation temperature and activation energy of degradation. The effects of different parameters on the structural characteristics of different films were investigated through the determination of possible changes in the degree of ordering of the polymeric substrates. The results revealed that the thermal stability of the trunk polymer, grafted polymer, and polymer modified by α‐cyano‐δ‐(2‐thienyl) crotononitrile increased progressively with an increasing degree of grafting. The increase was, however, more pronounced for the sample undergoing the lowest degree of grafting. The activation energy of the thermal degradation process remained almost unchanged, and this indicated that the degradation processes of the different films followed almost the same mechanism. The γ irradiation at a dose of 60 kGy of the sulfur‐treated polymeric films [i.e., the polymeric films treated with α‐cyano‐δ‐(2‐thienyl) crotononitrile] reduced their thermal stability. This conclusion was reached by the consideration of the changes observed in the pre‐exponential factor of the Arrhenius equation due to different chemical and γ‐irradiation treatments. The degree of ordering, evidenced by X‐ray diffraction measurements of the trunk polymer, grafted polymer, and modified polymer, suffered a significant drop. This drop was much more pronounced for the sulfur‐containing polymeric materials. The observed drop in the degree of ordering of the polymeric substrates was taken as a measure of the structure collapse due to a certain treatment (degree of grafting and sulfur inclusion). The γ irradiation of the sulfur‐containing polymeric materials greatly increased their degree of ordering, which reached a value greater than that measured for the trunk polymer. Therefore, it was concluded that the thermal stability increased as the degree of ordering decreased. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 506–515, 2006