Nanostructured nanoparticles of self-assembled lipid pro-drugs as a route to improved chemotherapeutic agents

We demonstrate that oral delivery of self-assembled nanostructured nanoparticles consisting of 5-fluorouracil (5-FU) lipid prodrugs results in a highly effective, target-activated, chemotherapeutic agent, and offers significantly enhanced efficacy over a commercially available alternative that does not self-assemble. The lipid prodrug nanoparticles have been found to significantly slow the growth of a highly aggressive mouse 4T1 breast tumour, and essentially halt the growth of a human MDA-MB-231 breast tumour in mouse xenografts. Systemic toxicity is avoided as prodrug activation requires a three-step, enzymatic conversion to 5-FU, with the third step occurring preferentially at the tumour site. Additionally, differences in the lipid prodrug chemical structure and internal nanostructure of the nanoparticle dictate the enzymatic conversion rate and can be used to control sustained release profiles. Thus, we have developed novel oral nanomedicines that combine sustained release properties with target-selective activation.     

Statistical assessment of starch removal from starchy wastewater using membrane technology

The present work deals with application of 2^5-2 fractional factorial design (FFD) to evaluate the operating parameters on starch separation from synthetic starchy wastewater using a hydrophilic polyethersulfone membrane with 0.65 μm pore size in a plate and frame handmade membrane module. The analysis of variance (ANOVA) combined with F-test was also used to recognize non-significant terms. The performance of the filtration process was evaluated by calculating the COD removal percentage (rejection factor) and permeate flux. In this experiment, five input parameters were surveyed, including trans membrane pressure (TMP), flow and temperature of feed, pH and concentration of wastewater. In this experiment, real wastewater was not used but synthetic starchy wastewater was prepared using starch. Two models were obtained from experimental data, capable of predicting COD removal percentage and permeate flux in different conditions. The predicted values obtained from the regression models were close to the actual ones. For the reduction of fouling, cleaning in place (CIP) method was used.     

Axial mixing and mass transfer investigation in a pulsed packed liquid–liquid extraction column using plug flow and axial dispersion models

In this research work, the volumetric overall mass transfer coefficient based on continuous-phase (K_oca) and axial dispersion coefficients of phases (E_c, E_d) in a pilot Pulsed Packed Liquid Extraction Column (PPLEC) have been studied using plug flow model (PFM) and axial dispersion model (ADM). Experiments have been carried out using standard systems of water/acetone/toluene and water/acetone/n-butyl–acetate. Values of K_oca evaluated by ADM are greater than those of PFM by about 20% indicating that the axial mixing lowers the performance of PPLEC. It was found that the drop-size distribution is the main cause of the axial mixing in PPLEC. Increase in dispersed phase flow rate (Q_d), increases all K_oca, E_d and E_c and the minimum values of both E_d and E_c and the maximum values of K_oca are in pulse intensity ranges of 0.8–1 cm/s. Finally, three empirical correlations are proposed for the prediction of these parameters which are in good agreement with the experimental data.     

Electrocatalytic oxidation of methanol on the nickel–cobalt modified glassy carbon electrode in alkaline medium

In this work, Ni–Co alloy coating on the surface of glassy carbon (GC) electrode was performed by cyclic voltammetry. The results showed that the deposition of Ni–Co is an anomalous process. The deposition bath was prepared according to the metal ion Ni/Co ratio of 4:1 using NiSO₄·7H₂O and CoSO₄·8H₂O, and the total concentration of all solutions was 40.0 mM. The pH of the bath solution was adjusted at 2.0 using boric acid at room temperature. The modified electrode was conditioned by potential recycling in a potential range of 100–700 mV (vs. Ag/AgCl) by cyclic voltammetric method in an alkaline solution. The Ni–Co modified electrode showed a higher activity towards methanol oxidation in the Ni (III) and Co (IV) oxidation states. Cyclic voltammetry was used for the electrochemical characterization of the Ni–Co modified electrode and the mechanism of methanol oxidation is proposed. The result of double steps chronoamperometry shows that the methanol electrooxidation is an irreversible reaction. Moreover, the effects of various parameters such as mole ratio of Ni–Co in the alloy in modification step, potential scan rate, methanol concentration and solution temperature on the electro-oxidation of methanol have also been investigated.     

Evaluation of Anion Effect on the Solubility of Hydrogen Sulfide in Ionic Liquids Using Molecular Dynamics Simulation

Theoretical Foundations of Chemical Engineering - In this study the solubility of Hydrogen Sulfide (H2S) in four ionic liquids: 1-Ethyl-3-methylimidazoliom Hexafluorophosphate [Emim][PF6],...     

The TiO2–Clay-LDPE Nanocomposite Packaging Films: Investigation on the Structure and Physicomechanical Properties

The role of nanoclays and TiO₂ nanoparticle loadings were investigated on low density polyethylene crystalline structure, in addition to studying packaging film properties such as barrier, thermal and mechanical properties. The polymer crystal study indicated for the orthorhombic crystal phase and about 20% lower degree of crystallinity for nanocomposites containing more than 2 wt.% TiO₂ nanoparticles. Based on the X-ray diffraction technique, the dispersion of nanoclays was improved to almost good degree of clay exfoliation with the company of 4 wt.% TiO₂ nanoparticles. In agreement with XRD results, the TEM morphological studies mainly suggest that TiO₂ has a helpful effect on nanoclay exfoliation. The increase in degradation temperature of nanocomposites may be attributed to the formation of inorganic char on polymer melt. The barrier properties of TiO₂/clay nanocomposite packaging films depend mainly on nanoclay loading with an unclear trend from TiO₂ nanoparticles. The increase in elastic modulus and the yield stress of nanocomposite films showed great effects on film mechanical properties by nanoclays.     

Highly efficient and versatile one-pot synthesis of substituted thienylidene compounds

A novel, efficient, and very mild one-pot synthesis of methyl 2-[(Z)-4-aryl-5-morpholino-3-oxo-2,3-dihydrothiophen-2-ylidene]acetate derivatives under kinetic control has been developed. The title compounds were prepared by the reaction of thioacetomorpholides with dimethyl acetylene-dicarboxylate (DMAD) in the presence of K₂CO₃ in a non-polar solvent with excellent yields.