New fluorinated poly(1,3,4-oxadiazole-ether-imide)s

New fluorinated poly(1,3,4-oxadiazole-ether-imide)s have been prepared by solution polycondensation reaction of different aromatic diamines having preformed 1,3,4-oxadiazole ring, such as 2,5-bis(p-aminophenyl)-1,3,4-oxadiazole, 2,5-bis[p-(4-aminophenoxy)phenyl]-1,3,4-oxadiazole, 2,5-bis[p-(3-aminophenoxy)phenyl]-1,3,4-oxadiazole, 2-(4-dimethylaminophenyl)-5-(3,5-diaminophenyl)-1,3,4-oxadiazole and 2-(4-fluorophenyl)-5-(3,5-diaminophenyl)-1,3,4-oxadiazole, with an aromatic dianhydride incorporating ether linkages and hexafluoroisopropylidene group, namely 1,1,1,3,3,3-hexafluoro-2,2-bis-[(3,4-dicarboxyphenoxy)phenyl]-propane dianhydride. The polymers were easily soluble in polar organic solvents, such as N-methylpyrrolidinone, N,N-dimethylformamide, and pyridine, as well as in certain low boiling-point organic solvents, such as tetrahydrofuran and chloroform. Very thin coatings deposited onto silicon wafers exhibited smooth, pinhole-free surface in atomic force microscopy. The polymers showed high thermal stability with decomposition temperature being above 410 °C. They exhibited a glass transition in the temperature range of 183-217 °C, with reasonable interval between glass transition and decomposition temperature. Solutions of some polymers in N,N-dimethylformamide exhibited blue fluorescence, having maximum emission wavelength in the range of 411-424 nm.     

Pheromone specificity inEriocrania semipurpurella (Stephens) andE. sangii (Wood) (Lepidoptera: Eriocraniidae) based on chirality of semiochemicals

The fifth abdominal segment of femaleEriocrania semipurpurella (Stephens) andE. sangii (Wood) contains a pair of exocrine glands. Hexane extracts of this segment were prepared from both species and analyzed by gas chromatography with simultaneous flame ionization and electroantennographic detection (EAD). For both species, the EAD active peaks were identified as nonan-2-one, (Z)-6-nonen-2-one, and (Z)-6-nonen-2-ol by means of mass spectrometry and comparison of retention indices with those of synthetic standards. Enantiomeric separation of chiral alcohols from the female extracts was achieved by gas chromatographic analysis on a cyclodextrin column. InE. semipurpurella, a mixture of (2S,6Z)-nonen-2-ol and (2R,6Z)-nonen-2-ol (2: I) was found, whereas inE. sangii (2S,6Z)-nonen-2-ol was the predominant enantiomer and only traces of theR enantiomer were indicated by the antennal response. In field tests, a blend of the three compounds was not attractive to conspecific males. A subtractive assay showed that the alcohol in various enantiomeric mixtures was the only attractive compound, whereas addition of (Z)-6-nonen-2-one to the alcohol completely inhibited the attraction of both species. A trapping experiment including a wide range of ratios between theR andS enantiomers showed that baits containing 95–100% of theS enantiomer were attractive to maleE. sangii, whereas males ofE. semipurpurella were attracted to all tested ratios of the enantiomers. However, the response profiles of maleE. semipurpurella differed between populations from southern Sweden, south Finland, and the Kola Peninsula in Russia. In south Sweden males were maximally attracted to a racemic mixture of the alcohols. At the Kola PeninsulaE. semipurpurella was attracted to baits containing 95–100% of theR enantiomer. In south Finland all tested ratios between 0 and 100%R enantiomer trappedE. semipurpurella, but the trap catches appeared to be bimodally distributed with peaks around 15 and 70%R enantiomer. The trapping results suggest the existence of pheromone races or sibling species among the specimens identified asE. semipurpurella.Dedicated to Prof. H. J. Bestmann on the occasion of his 70th birthday.     

Integration Concepts for the Fabrication of LTCC Structures

At the Keck Smart Materials Integration Laboratory at Penn State University, low-temperature co-fired ceramic (LTCC) material systems have been used to fabricate a number of devices for a variety of applications. This article presents an overview of the integration of the concepts and materials that we have used to achieve miniaturization and unique device function. Examples of microwave filters, metamaterial antennas, and a dielectrophoretic cell sorter will be presented, with emphasis on device modeling and design, prototype construction methods, and test results.     

Stay with the flow: How macroinvertebrate communities recover during the rewetting phase in Alpine streams affected by an exceptional drought

Droughts are affecting an increasing number of lotic ecosystems worldwide due to the combined effects of climatic and anthropogenic pressures. Unlike naturally intermittent rivers, where the drying phase is a part of the annual flow regime, water scarcity in Alpine rivers represents a relatively recent phenomenon and, therefore, a major threat for the biodiversity of these lotic ecosystems. However, Alpine stream community response to drought is still poorly investigated. Here, we assess the recovery of macroinvertebrates in two Alpine streams after a supraseasonal drought. As water returned, a total of 10 sampling sessions were carried out, and temporal patterns in diversity, density, and taxonomic composition of benthic communities, as well as in the percentage of functional feeding groups, were investigated. We found that the resistance of invertebrate communities in Alpine streams is generally low: drought markedly reduced the diversity and density of macroinvertebrates. Conversely, our results suggest that the passive dispersal by drift from the upstream river sections seems the most probable mechanism promoting the post‐drought recovery. Nevertheless, this resilience ability appears to be stream specific and influenced by intrinsic stream characteristics, including the flow permanence and distance from the nearest upstream perennial reach. This work sheds light on the ecological consequences of droughts on macroinvertebrate communities. As flow intermittency in Alpine areas is expected to intensify under current global change scenarios, results of this study provide important information to predict changes in the taxonomic composition and diversity of macroinvertebrate communities.     

Fabrication of co-PVDF/modacrylic/SiO2 nanofibrous membrane: Composite separator for safe and high performance lithium-ion batteries

Highly porous free-standing co-poly(vinylidene fluoride)/modacrylic/SiO₂ nanofibrous membrane was developed using electrically-assisted solution blow spinning method. The performance and the potential of the membrane as a lithium-ion battery separator were investigated. The addition of modacrylic enhanced the solution spinnability that resulted in defect-free membranes. Moreover, the presence of modacrylic enhanced the dimensional and thermal stabilities, while the addition of hydrophilic SiO₂ nanoparticle enhanced both mechanical property and ionic conductivity. Combustion test results illustrated that the presence of modacrylic provide flame retarding property over a set of different polymeric-based membranes. Electrochemical performance results showed that the developed membrane can increase the battery capacity compared with the commercial separator.     

Fine grinding of thermoplastics by high speed friction grinding assisted by guar gum

High speed friction grinding has been used to grind plant and food substances in water but never been explored for grinding of thermoplastics like polylactic acid (PLA), low and high density polyethylene and polypropylene. Such grinding was investigated in this work and was made possible by using 0.5% guar gum solution instead of just water because increasing the viscosity of water reduced their settling and the speed of passing through the grinder. Tensile, flexural, and impact strengths of the plastics were studied and higher grinding efficiency of PLA could be explained by its low elongation-at-break compared to low density polyethylene, high density polyethylene, and polypropylene. The microplastics (2000–45 μm) were studied for mass and particle size distributions and by scanning electron microscopy, ¹³C CP/MAS NMR, Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. In addition, viscosity of guar gum and contact angles was measured. This new technology can produce finely ground microplastics (710–45 μm) for a variety of applications.     

Robustness of ISS systems to inputs with limited moving average: Application to spacecraft formations

We provide a theoretical framework that fits realistic challenges related to spacecraft formation with disturbances. We show that the input‐to‐state stability of such systems guarantees some robustness with respect to a class of signals with bounded average‐energy, which encompasses the typical disturbances acting on spacecraft formations. Solutions are shown to converge to the desired formation, up to an offset, which is somewhat proportional to the considered moving average of disturbances. In the presence of fast peaking perturbations, the approach provides a tighter evaluation of the disturbances' influence, which allows for the use of more parsimonious control gains. Copyright © 2015 John Wiley & Sons, Ltd.     

Maximum density of quantum information in a scalable CMOS implementation of the hybrid qubit architecture

Scalability from single-qubit operations to multi-qubit circuits for quantum information processing requires architecture-specific implementations. Semiconductor hybrid qubit architecture is a suitable candidate to realize large-scale quantum information processing, as it combines a universal set of logic gates with fast and all-electrical manipulation of qubits. We propose an implementation of hybrid qubits, based on Si metal-oxide-semiconductor (MOS) quantum dots, compatible with the CMOS industrial technological standards. We discuss the realization of multi-qubit circuits capable of fault-tolerant computation and quantum error correction, by evaluating the time and space resources needed for their implementation. As a result, the maximum density of quantum information is extracted from a circuit including eight logical qubits encoded by the [[7, 1, 3]] Steane code. The corresponding surface density of logical qubits is 2.6 Mqubit/cm\(^2\).     

2-Transitivity is Insufficient for Local Testability

A basic goal in property testing is to identify a minimal set of features that make a property testable. For the case when the property to be tested is membership in a binary linear error-correcting code, Alon et al. (Trans Inf Theory, 51(11):4032–4039, 2005) had conjectured that the presence of a single low-weight codeword in the dual, and “2-transitivity” of the code (i.e., the code being invariant under a 2-transitive group of permutations on the coordinates of the code) suffice to get local testability. We refute this conjecture by giving a family of error-correcting codes where the coordinates of the codewords form a large field of characteristic two, and the code is invariant under affine transformations of the domain. This class of properties was introduced by Kaufman & Sudan (STOC, 2008) as a setting where many results in algebraic property testing generalize. Our result shows a complementary virtue: This family also can be useful in producing counterexamples to natural conjectures.