Picosecond photodiffraction in semiconductor multiquantum wells and microcavities

We study the transient gratings photogenerated in the picosecond regime in three families of structures, namely : - structures of thickness in the order of one micron, including quantum wells (GaAs/GaAlAs, CdTe/ CdZnTe). A transmission modulation due to the electric field has been observed. We show that, in accordance with our calculations, this modulation is screened faster than 10 ps at a fluence of a few µJ/cm2. - A structure including GalnAs/GalnAsP MQWS in a cavity. This structure shows a top diffraction efficiency of 2.5 × 10-² at 1.55 µm for an energy of excitation in the order of 100 µJ/cm2. The diffraction efficiency exhibits several oscillations due to Fabry-Pårot effects. By introducing cavity effects in our model, we show that the diffraction efficiency is amplified by more than a factor 2 with respect to the no-cavity case. Calculations show that the diffraction efficiency may reach 6 × 10-² around 1.625 µm, for a front mirror reflectivity of 90 %. - Structures including bulk GaAs microcavities. The risetime is lower or in the order of 1 ps while the diffraction efficiency attains 1 %, with an average power of 4 mW (i.e. an energy of 2 µJ/cm²/pulse), compatible with a commutation of packets at 80 MHz.     

Estimation of bitumen emulsion dispersion using a light scattering method

Petroleum bitumen in the emulsified state is widely used as a binder in road and civil construction. Along with traditional quality parameters of bitumen emulsions the particle size is considered to be very important characteristic. The particle size of the dispersed phase affects the setting rate and viscosity of bitumen emulsions. The complete data on the particles size distribution can be obtained using such technical methods as light scattering and microscopy. In the study bitumen emulsions with three types of surfactants (cationic, nonionic, zwitterionic) have been prepared and their viscosity and decay index have been determined. The emulsions also have been studied with a microscope, as well as by the method of dynamic light scattering. The dynamics of particle size changes of the bitumen emulsions has been compared with the dynamics of the change in the basic parameters of the emulsions, such as viscosity and decay index, and the correlation between them has been found. Thus, using a modern laser and optical equipment, it is possible to estimate the quality of emulsions and, if necessary, to correct their composition.     

Solid-Phase Microextraction (SPME) of Pyrazines in Model Reaction Systems

Headspace solid-phase microextraction (HS-SPME) combined with gas chromatography (GC) was used for isolating and analysing pyrazines formed in a model system. This system consisted of an aqueous mixture of glucose, glycine and sodium hydroxide. Pyrazine formation was accelerated by heating in a microwave oven. Results were compared with our earlier ones using conventional techniques for isolation of pyrazines. HS-SPME-GC showed several advantages over traditional methods. The method is rapid, sensitive, easy to use and reproducible. Headspace and liquid of the model reaction were extracted and the results obtained using headspace sampling showed good agreement with the methylene chloride extraction method. In all cases, coefficients of variation of 5% or lower were obtained when the SPME extraction time was consistent.     

Insights on the Side Panels of the <Emphasis Type="Italic">Franciscan Triptych</Emphasis> by Fra Angelico Using Terahertz Time-Domain Imaging (THz-TDI)

The side panels of the Franciscan Triptych (St. Jerome, St. John the Baptist, and the Archangel Gabriel and St. Francis, St. Onofrio, and the Virgin Annunciate, by Fra Angelico, before 1429) were scanned by means of terahertz time-domain imaging (THz-TDI). THz analysis supplied information on the stratigraphy of the panel paintings and the associated construction, “gessoing” and gilding techniques. Furthermore, THz-TDI provided information regarding the location of restoration materials within the painting stratigraphy on St. Jerome, St. John the Baptist, and the Archangel Gabriel, as well as on the extension and nature of subsurface cracks in the panel painting of St. Francis, St. Onofrio, and the Virgin Annunciate.     

Propagation delay influence in IEEE 802.11 outdoor networks

Originally, Wireless Local Area Networks served only small indoor areas. Nevertheless, the idea of employing IEEE 802.11 networks in large outdoor environments is a very attractive possibility. IEEE 802.11 technology offers several advantages: the low cost of equipment, its operation in the unlicensed spectrum and its higher data rates. Since the advent of the first IEEE 802.11 standard, a great deal of research has been carried out. So-called Wifi-based Long Distance networks are currently being deployed. In this paper, we study the suitability of employing IEEE 802.11 networks in large outdoor environments without modifying the standard working procedure. In such scenarios, IEEE 802.11 networks should offer coverage ranges of several kilometer, which leads to high propagation delay values. Thus, we analyze the influence of increasing propagation delay in the IEEE 802.11 MAC protocol. To carry out our analysis we present a mathematical model and simulation results. We provide an operating range in which IEEE 802.11 performance is feasible and establish a throughput threshold according to the propagation delay.     

Surface Chemistry Dictates the Osteogenic and Antimicrobial Properties of Palladium-, Platinum-, and Titanium-Based Bulk Metallic Glasses

Titanium alloys are commonly used as biomaterials in musculoskeletal applications, but their long-term efficacy can be limited by wear and corrosion, stress shielding, and bacterial colonization. As a promising alternative, bulk metallic glasses (BMGs) offer superior strength and corrosion resistance, but the influence of their chemical composition on their bioactivity remains largely unexplored. This study, therefore, aims to examine how the surface chemistry of palladium (Pd)-, platinum (Pt)-, and titanium (Ti)-based BMGs can steer their response to biological systems. The chemical composition of BMGs governs their thermophysical and mechanical properties, with Pd-based BMGs showing exceptional glass-forming ability suitable for larger implants, and all BMGs exhibiting a significantly lower Young's modulus than Ti-6Al-4 V (Ti64), suggesting a potential to reduce stress shielding. Although BMGs feature copper depletion at the near surface, their surface chemistry remains more stable than that of Ti64 and supports blood biocompatibility. Fibrin network formation is heavily dependent on BMGs’ chemical composition and Ti-based BMGs support thicker fibrin network formation than Ti64. Furthermore, BMGs outperform Ti64 in promoting mineralization of human bone progenitor cells and demonstrate antimicrobial properties against Staphylococcus aureus in a surface chemistry-dependent manner, thereby indicating their great potential as biomaterials for musculoskeletal applications.     

Catalyst Design by NH4OH Treatment of USY Zeolite

Hierarchical zeolites are a class of superior catalysts which couples the intrinsic zeolitic properties to enhanced accessibility and intracrystalline mass transport to and from the active sites. The design of hierarchical USY (Ultra‐Stable Y) catalysts is achieved using a sustainable postsynthetic room temperature treatment with mildly alkaline NH₄OH (0.02 m ) solutions. Starting from a commercial dealuminated USY zeolite (Si/Al = 47), a hierarchical material is obtained by selective and tuneable creation of interconnected and accessible small mesopores (2–6 nm). In addition, the treatment immediately yields the NH₄⁺ form without the need for additional ion exchange. After NH₄OH modification, the crystal morphology is retained, whereas the microporosity and relative crystallinity are decreased. The gradual formation of dense amorphous phases throughout the crystal without significant framework atom leaching rationalizes the very high material yields (>90%). The superior catalytic performance of the developed hierarchical zeolites is demonstrated in the acid‐catalyzed isomerization of α‐pinene and the metal‐catalyzed conjugation of safflower oil. Significant improvements in activity and selectivity are attained, as well as a lowered susceptibility to deactivation. The catalytic performance is intimately related to the introduced mesopores, hence enhanced mass transport capacity, and the retained intrinsic zeolitic properties.     

Casimir Effect in Optoelectronic Devices Using Ferrofluids

Some of the modern electronic and optoelectronic devices exploit ferrofluids contained in narrow gaps between two material plates. When the width of the gap becomes below a micrometer, the boundary plates are subjected to the Casimir force arising from the zero-point and thermal fluctuations of the electromagnetic field. These forces should be taken into account in microdevices with the dimensions decreased to below a micrometer. In this paper, we review recently performed calculations of the attractive Casimir pressure in three-layer systems containing a ferrofluid. We also find the ferrofluidic system where the Casimir pressure is repulsive. This result is obtained in the framework of the fundamental Lifshitz theory of van der Waals and Casimir forces. The conclusion is made that enhanced repulsion due to the presence of a ferrofluid may prevent from sticking of closely spaced elements of a microdevice.