Analytical modeling of Raman lidar return,including multiple scattering

An analytical approach to modeling Raman lidar return with multiple scattering in presented. This approach is based on a small-angle quasi-single-scattering approximation developed earlier for elastic lidar sounding. An approximation of isotropic backscattering for the Raman-scattering case is proposed and tested. The computed results are presented and compared with known data. The approximation was found to be quite simple and provided a high accuracy of Raman lidar return calculations.     

First data from the EGLE experiment onboard the ISS

EGLE is a wide frequency band search- coil magnetometer designed and built at the Roma Tre University. It has been installed onboard the ISS by the Italian astronaut Roberto Vittori on April 25, 2005 within the LAZIO- EGLE experiment carried out during the ENEIDE Soyuz mission. The scope of the experiment is to test EGLE in space and to investigate geomagnetic field variations. The main applications of EGLE are the study of electromagnetic environment inside the ISS, the correlation of magnetic field data with particle fluxes detected by LAZIO particle detector, and the monitoring of ionospheric perturbations possibly caused by Earth seismic activity. Since continuous electromagnetic field measurements on board the ISS are important for diverse space applications, a magnetometer with a suitable design is requested. Appropriate solutions for these applications, which have been adopted by EGLE, are in particular the use of 1- Wire technology and the possibility to detect by means of a search- coil magnetometer a large portion of the ULF frequency band, usually measured by flux- gate probes. To investigate the topside ionosphere electromagnetic environment and stability of Van Allen radiation belts in relation with seismic and anthropogenic electromagnetic emissions, a specific satellite mission (the ESPERIA project) has been designed for the Italian Space Agency (ASI), and up to now a few instruments of its payload have been built and tested in space. One of them is exactly the EGLE search- coil magnetometer. The first magnetic observations performed by this instrument reveal to be promising and demand for a further and deeper analysis based on a longer time series of data.     

Shallow Trench Isolation for the 45-nm CMOS Node and Geometry Dependence of STI Stress on CMOS Device Performance

In the present work, a high aspect ratio process (HARP) using a new O₃/TEOS based sub atmospheric chemical vapor deposition process was implemented as STI gapfill in sub-65-nm CMOS. Good gapfill performance up to aspect ratios greater than 10:1 was demonstrated. Since the HARP process does not attack the STI liner as compared to HDP, a variety of different STI liners can be implemented. By comparing HARP with HDP, the geometry dependence of nand p-FET performance due to STI stress is discussed     

Design of an enhanced access point to optimize TCP performance in Wi-Fi hotspot networks

In the last years, the number of Wi-Fi hotspots at public venues has undergone a substantial growth, promoting the WLAN technologies as the ubiquitous solution to provide high-speed wireless connectivity in public areas. However, the adoption of a random access CSMA-based paradigm for the 802.11 MAC protocol makes difficult to ensure high throughput and a fair allocation of radio resources in 802.11-based WLANs. In this paper we evaluate extensively via simulations the interaction between the flow control mechanisms implemented at the TCP layer and the contention avoidance techniques used at the 802.11 MAC layer. We conducted our study considering initially M wireless stations performing downloads from the Internet. From our results, we observed that the TCP downlink throughput is not limited by the collision events, but by the inability of the MAC protocol to assign a higher chance of accessing the channel to the base station. We propose a simple and easy to implement modification of the base station’s behavior with the purpose of increasing the TCP throughput reducing useless MAC protocol overheads. With our scheme, the base station is allowed to transmit periodically bursts of data frames towards the mobile hosts. We design a resource allocation protocol aimed at maximizing the success probability of the uplink transmissions by dynamically adapting the burst length to the collision probability estimated by the base station. By its design, our scheme is also beneficial to achieve a fairer allocation of the channel bandwidth among the downlink and uplink flows, and among TCP and UDP flows. Simulation results confirm both the improvement in the TCP downlink throughput and the reduction of system unfairness.     

Seeing through dust and water vapor: Millimeter wave radar sensors for mining applications

This paper defines the issues required for the development of successful visualization sensors for use in open cut and underground mines. It examines the mine environment and considers both the reflectivity of the rock and attenuation effects of dust and water droplets. Millimeter wave technology, as an alternative to the more commonly used laser and sonar implementations, is selected due to its superior penetration through adverse atmospheric conditions. Of the available radar techniques, frequency modulated continuous wave (FMCW) is selected as being the most robust. The theoretical performance of a number of 77 and 94 GHz FMCW millimeter wave radar systems is determined and these confirm the capability of these sensors in the mining environment. Implementations of FMCW radar sensors for simple ranging and three‐dimensional surface profiling are discussed before data obtained during field trials in mines is presented to justify the selection of this technology. © 2007 Wiley Periodicals, Inc.     

Demodulation techniques for the amplitude modulated laser imager

A new technique has been found that uses in-phase and quadrature phase (I/Q) demodulation to optimize the images produced with an amplitude-modulated laser imaging system. An I/Q demodulator was used to collect the I/Q components of the received modulation envelope. It was discovered that by adjusting the local oscillator phase and the modulation frequency, the backscatter and target signals can be analyzed separately via the I/Q components. This new approach enhances image contrast beyond what was achieved with a previous design that processed only the composite magnitude information.     

Proteolysis of alphas-casein as a marker of Grana Padano cheese ripening

Since casein proteolysis has a critical role in defining the typical characteristics of Grana Padano cheese, we evaluated the hydrolysis of alphas-casein during the ripening process. Thanks to the high specificity of the anti-alphas((alphas1 + alphas2)-casein monoclonal antibody and amino acid sequence determination, it was possible to identify three main alphas-casein-derived polypeptides in cheese: alphaa, alphab, and alphac. Their production by the three enzymes most involved in cheese proteolysis (pepsin, chymosin, and plasmin) was evaluated by performing in vitro digestions. Data showed that alphaa was released in cheese mainly by the chymosin attack, while alphab and alphac were due to the action of plasmin. A significant correlation between the abundance of some polypeptides and ripening process was shown.     

Identification and functional traits of lactic acid bacteria isolated from Ciauscolo salami produced in Central Italy

Lactic acid bacteria (LAB) from Ciauscolo salami produced in Marche Region of Central Italy, and LAB strains belonging to our laboratory collection were examined for their capability to survive at low pH and bile, to adhere to Caco-2 cells, and for antibiotic resistance. LAB from Ciauscolo were identified by ARDRA and RAPD-PCR. Our study showed that all LAB strains had good adaptation to gastric juice and moderate tolerance to bile. The adhesiveness was variable among strains but significantly lower in LAB from food. Antibiotic resistance was broadly spread among food strains, with level of resistance exceeding 15% for all the antibiotics tested. The resistance determinants erm(B) and tet(M) were found in nine strains of food origin (21.4%) while tet(L) in one strain of our collection (5%). Our work suggests that fermented foods are valuable sources of bacterial strains with functional traits of intestinal lactobacilli. These bacteria may be further studied for their use in probiotic applications.     

Effect of different mixers on physicochemical properties and water status of extruded and laminated fresh pasta

Physicochemical properties and water status of fresh pasta (both extruded and laminated) produced with recently designed mixers (Premix^® and Bakmix^®) that induce a uniform hydration of the solids and allow the formation of a dough in 1–2 s were evaluated.