Reduced myofibroblast differentiation on femtosecond laser treated 316LS stainless steel

In-stent restenosis is a common complication after stent surgery which leads to a dangerous wall narrowing of a blood vessel. Laser assisted patterning is one of the effective methods to modify the stent surface to control cell–surface interactions which play a major role in the restenosis. In this current study, 316LS stainless steel substrates are structured by focusing a femtosecond laser beam down to a spot size of 50 μm. By altering the laser induced spot density three distinct surfaces (low density (LD), medium density (MD) and high density (HD)) were prepared. While such surfaces are composed of primary microstructures, due to fast melting and re-solidification by ultra-short laser pulses, nanofeatures are also observed as secondary structures. Following a detailed surface characterization (chemical and physical properties of the surface), we used a well-established co-culture assay of human microvascular endothelial cells and human fibroblasts to check the cell compatibility of the prepared surfaces. The surfaces were analyzed in terms of cell adherence, proliferation, cell morphology and the differentiation of the fibroblast into the myofibroblast, which is a process indicating a general fibrotic shift within a certain tissue. It is observed that myofibroblast proliferation decreases significantly on laser treated samples in comparison to non-treated ones. On the other hand endothelial cell proliferation is not affected by the surface topography which is composed of micro- and nanostructures. Such surfaces may be used to modify stent surfaces for prevention or at least reduction of restenosis.     

A novel microbial BOD biosensor developed by the immobilization of P. Syringae in micro‐cellular polymers

BACKGROUND: A biochemical oxygen demand (BOD) sensor, based on an immobilized Pseudomonas syringae in highly porous micro‐cellular polymer (MCP) in combination with a dissolved oxygen electrode, has been developed for the analysis of biodegradable organic compounds in aqueous samples. Microorganisms were immobilized in a molded MCP disk and a wastewater sample was injected into the biocomposite disk by a flow injection system. Dissolved oxygen (DO) changes as a measure of soluble BOD was read with a DO probe placed into a flow cell carrying biocatalytically activated disk. RESULTS: Optimal response of the MCP BOD sensor was obtained at pH 6.8 and 25 °C with a typical response time of 3–5 min for a 2 mm thick molded polymeric disk. The sensor showed detection linearity over the range 5–100 mg L^?1 BOD₅ (r² > 0.99) at a flow rate of 0.6 mL min^?1. The repeatability and reproducibility of the sensor response were found to be 3.08% and 7.77%, respectively. BOD values produced with this biosensor for various municipal and industrial wastewaters correlated well with those determined by the conventional 5‐day BOD test. CONCLUSION: This new biosensor was different from present amperometric BOD biosensor configurations in which the biocatalyst (microbial/enzymatic) is placed between cellulose and Teflon membranes installed on a DO probe. The use of a molded MCP disk coniainng microbial activity offers better stability and lifetime for commercial use in environmental monitoring. Copyright © 2008 Society of Chemical Industry     

Amperometric alcohol biosensors based on conducting polymers: Polypyrrole,poly(3,4-ethylenedioxythiophene) and poly(3,4-ethylenedioxypyrrole)

Alcohol biosensors based on conducting polypyrrole (PPy), poly(3,4-ethylenedioxythiophene) (PEDOT) and poly(3,4-ethylenedioxypyrrole) (PEDOP) were constructed. Alcohol oxidase (AlcOx, from Pichia pastoris) was immobilized during electropolymerization of the monomers in sodium dodecylsulfate (SDS) and phosphate buffer electrolysis medium. Optimization of several parameters was carried out. The highest affinity was observed for the PEDOT/AlcOx sensor. Lowry protein determination method was also used to calculate the amount of immobilized enzyme in sensors. Before testing the biosensors on alcoholic beverages effects of interferents (glucose, acetic acid, citric acid, and l-ascorbic acid) were determined. The alcohol contents of the distilled beverages (vodka, dry cin, whisky, and rak?) were determined with the sensors constructed. A good match with the chromatography results was observed.     

Extraction of phenolic compounds from Vitex agnus-castus L.

The primary objective of this study was to valorized Vitex agnus-castus residues in terms of phenolic compounds. The effects of extraction time (30–360 min), solid to liquid ratio (0.1–0.3 g_DryBiomass/ml_Solvent), type of solvent and different tissue types (leave, roots and seeds) on total polyphenols, o-diphenols, total flavonoids and anthocyanins were evaluated. The highest total polyphenol (31.5 mg_{CaffeicAcidEquivalent}/g_DryBiomass) and o-diphenol (12.4 mg_{CaffeicAcidEquivalent}/g_DryBiomass) contents were obtained from methanolic extract of leaves after 180 min using a solid/liquid ratio of 0.1 g_DryBiomass/ml_Solvent, while total flavonoids, reached a maximum value of 19.4 mg_{CatechinEquivalent}/g_DryBiomass after 360 min under the same conditions. Roots of V. agnus-castus were found to be a good source of anthocyanins with the highest yield of 0.62 mg_{MalvidinEquivalent}/g_DryBiomass using ethanol as a solvent (180 min and 0.2 g_DryBiomass/ml_Solvent). The maximum antiradical power (178.5 μl_extract/μg_DPPH) was exhibited by the methanolic leave extract obtained after 360 min at solid/liquid ratio of 0.3 g_DryBiomass/ml_Solvent.     

The effects of achromatic and chromatic color schemes on participants' task performance in and appraisals of an office environment

This study explores the effects of chroma on participants' performance and environmental appraisal of an office. The research was conducted in a full‐scale experimental room designed as a private office where achromatic and chromatic color schemes with coequal values were applied. Sixty participants were assigned tasks and given a questionnaire to appraise the spatial color schemes. The findings show that chroma significantly affects performance and space appraisal. In terms of accuracy and time spent performance scores measured significantly better in the room with the chromatic scheme than those in the room with the achromatic scheme. The office with the chromatic scheme was found to be more pleasant, attractive, satisfying and dynamic than the one with the achromatic scheme, whereas the achromatic scheme was thought to be more formal and harmonious. Categorization of pleasantness, harmony, dynamism and spaciousness by factor analysis also showed differences between the achromatic and chromatic schemes. © 2011 Wiley Periodicals, Inc. Col Res Appl, 2012     

Monodisperse poly(p-chloromethylstyrene) microbeads by dispersion polymerization

In this study, an alternative dispersion polymerization method for the para isomer of chloromethylstyrene was proposed. Highly monodisperse poly(p-chloro-methylstyrene) (PCMS) particles in the size range of 1.67–3.75 μm were obtained. The monodispersity and the isolation yield of PCMS particles were significantly improved relative to the methods available in the literature. Azobisisobutyronitrile and polyacrylic acid were selected as the initiator and the steric stabilizer, respectively, in the dispersion medium composed of ethanol and methoxyethanol. The results indicated that the particle size increased with increasing initiator concentration. An increase in the stabilizer concentration led to a decrease in the particle size. The methoxyethanol/ethanol ratio was found as one of the most important parameters controlling the average size and the size distribution. Contrary to the tendencies noted in the literature, the particle size decreased with increasing polymerization temperature.     

Challenges in Developing a Bessel-Beam Based Ultrafast Ablation Probe

Instruments and Experimental Techniques - With its elongated depth of focus, Bessel beams offer rapid and high aspect ratio ablation capability, in contrast to Gaussian beam counterparts. In this...