Determination of the quality and purity characteristics of olive oils obtained from different regions of Turkey,depending on climatic changes

Virgin olive oils (VOOs) obtained from olives grown in different regions of Turkey under changing climatic conditions sometimes show different sensory and chemical properties. This study was planned to determine whether these deviations are due to climatic changes or not. For this purpose, five different olive varieties (Ayvalık, Memecik, Gemlik, Nizip Yağlık, Kilis Yağlık) of commercial importance were harvested from the provinces/districts (four different region) where cultivation is intense during the 2017/2018–2020/2021 harvest years. Every year, olive samples were collected from 3 orchards from 13 provinces/districts. One hundred and fifty-six samples were subjected to the purity, quality and sensory analysis. Basic climatic values (average, minimum and maximum temperature, humidity and precipitation) were examined for four consecutive years. All of the examined olive oil samples were determined within the legal limits in terms of fatty acid composition and fatty acid ethyl ester values. However, delta-7-stigmastenol value from the sterol composition was found to be above 0.5% in some samples in all the years studied (total 21 samples). Delta-7-stigmastenol values of olive oil samples varied between 0.16% and 1.14%. Multiple linear regression analysis was applied using a genetic algorithm-based inverse least squares method to determine whether there is a relationship between climate data and delta-7-stigmastenol values. According to this result, it has been determined that the delta-7-stigmastenol value is high when the annual average relative humidity is low and the annual average temperature is high. There is an urgent need to make forward-looking plans due to climate change.     

Thermal behaviour and crystallization analysis of ethylene-propylene (EP) copolymer and EP-styrene terpolymer

Polyolefin copolymers have been an important commercial product since their invention. Hence, it is crucial to study their co- and terpolymers due to their extensive use. In this paper, in situ synthesis of ethylene-propylene (EP) copolymer, its terpolymer with styrene, and composites with nickel-chromium (NiCr) layered double hydroxide (LDH) has been reported along with their thermal properties. Styrene had a significant impact on the activity, increasing the yield by 195% and 235% with an addition of 0.5 and 1.0 mL styrene, respectively, compared to neat EP. The crystallinity, melting temperature, and thermal stability decreased due to styrene; nevertheless, it performed better compared to a similar work of terpolymer where α-olefin was the third monomer. The incorporation of NiCr LDH as a drop-in filler during in situ polymerization affected adversely the thermal stability of the terpolymer. However, the ultrasonication treatment improved the thermal stability of the final product.     

Reduction of Salmonella enterica in Turkey breast slices kept under aerobic and vacuum conditions by application of lactic acid,a bacteriophage,and ultrasound

The effects of different antimicrobial applications against Salmonella enterica subs. enterica DSM 18522 strain in turkey breast slices kept under either aerobic or anaerobic-vacuum conditions for different keeping times of 30 min and 6 hr at 4°C were evaluated. In this study, it was aimed to compare chemical (lactic acid, 3%), biopreservation (bacteriophage Felix O1, 1 × 10⁸ pfu/ml), and physical (ultrasound, 20 kHz) antimicrobial applications in reducing a high initial S. enterica DSM 18522 count (~6 log cfu/g) in turkey breast slices at different conditions. The highest reduction in S. enterica DSM 18522 counts (1.62 log units) was observed in turkey breast slices kept under aerobic condition for 6 hr after being treated with lactic acid. The bacteriophage application significantly (p < .05) reduced S. enterica DSM 18522 counts 1.22 and 1.41 log cfu/g in turkey breast slices that kept under aerobic and anaerobic-vacuum conditions for 30 min, respectively. There was no significant effect of keeping time under aerobic or anaerobic-vacuum conditions on S. enterica DSM 18522 counts in turkey breast slices treated with bacteriophage or ultrasound. However, the reduction of S. enterica DSM 18522 counts in turkey breast slices treated with lactic acid increased with keeping time under aerobic or anaerobic-vacuum conditions. Regardless of keeping conditions, the lowest reductions in S. enterica DSM 18522 counts were detected in turkey breast slices treated with ultrasound. The results of this study show that lactic acid and bacteriophage applications are effective in reducing S. enterica DSM 18522 counts in turkey breast slices.     

Prediction of the colorimetric parameters and mass loss of heat‐treated bamboo: Comparison of multiple linear regression and artificial neural network method

In this study, the colorimetric parameters (L*, a*, b*) and mass loss of heat‐treated bamboo were investigated, and the obtained results were modeled by using two methods: multiple linear regression (MLR) and artificial neural network (ANN). First, bamboo samples were exposed to heat treatment at different temperatures (110°C, 140°C, 170°C, and 200°C) and durations (15, 30, 45, 60, 75, 90, and 115 minutes) in a laboratory oven. Then, the colorimetric parameters (L*, a*, b*) and mass loss of each sample were measured after each period of heat treatment. All data were modeled by using two methods separately for each parameter and the performances of these proposed methods were compared. It was found that color change and mass loss increased with increasing temperature and duration of heat treatment. Mean absolute percentage error (MAPE) values of all obtained MLR ranged from 0.64% to 10.63%, while the all MAPE values of ANN were found to be lower than 1.5%. Based on these results, it can be said that MLR and ANN could be used to evaluate the changes on the selected properties of heat‐treated bamboo samples. On the other hand, it should be emphasized that the ANN gave more accurate results than the MLR method because of its learning capability.     

A Critical Review of Biological Processes and Technologies for Landfill Leachate Treatment

The most common method to deal with the huge production of municipal wastes is still the disposal in landfills which, however, generates a leachate with high contents of organic and nitrogen pollutants. Requirements must be fixed by law to control leachate release from such landfills, and effective treatment processes and technologies must be applied to reduce its impact on the environment. Biological processes for leachate treatment are discussed in this review, in the former part of which attention is paid to leachate formation and its qualitative and quantitative features, while the latter deals with the state‐of‐the‐art of the most effective biotechnological treatments presently employed. Processes, alternative methods, and technological improvements are compared, with special focus on novel technologies to remove nitrogen pollutants from leachate, highlighting advantages and drawbacks of each treatment.     

Analyse numérique et expérimentale du comportement des ouvrages fondés sur un sol mou renforcé par des colonnes ballastées flottantes

This paper work is in the frame of the study about the reduction of settlements in the case of floating columns. The prediction of a settlement remains a prickly problem to which geotechnical engineer is confronted. Experience has shown that structural pathologies are caused by the effects of excessive differential settlements before reaching soil bearing capacity. To palliate this problems in the case of soft and compressible soils, we advocate, as an alternative solution, piles or the reinforcement of the soils with stone columns. This strengthening method, introduced in Algeria in 1999, is economical. However, it does not inihilate settlements but it speeds up the time factor. Numerical modelings by finite element method (FEM) have been carried out through interest into all mechanical and geometrical aspects that are inherent in the meshing of floating stone columns. An analytical formulation of a correction coefficent (μβ) and an abacus of the settlement reduction factor (β) has been suggested. On the other way, the monitoring instrumentation of experimental site since 2008 to 2017 at the level of the harbour lowland of Bejaia has been carried out. It concerns important storage structures fonded on a very compressible ground reinforced by floating stone columns. The records of the settlements at the scale of the structures, according to variable loads recorded in real time, have revealed excessive settlements under the effects of variable stresses from 1 to 3 bars. An exhaustive geological, geotechnical and geomechanical analysis has been carried out for the characterization of the grounds, and numerical modelling by finite element method (FEM) has been carried out. The experimental and numerical investigation of the concerned structures at issue allowed us to confront the results with regard to settlement prediction of an environment reinforced with floating stone columns. The result is a perfect matching in relation to the suggested formula.

     

Characterization and antibacterial properties of nanoboron powders and nanoboron powder coated textiles

The antibacterial properties of boron-containing compounds are well known although there are limited studies available on the pure boron nanoparticles. In this paper, nanoboron particles are characterized in terms of their particle size, shape, stability and surface charge before and after their application onto textile surfaces to study their impact on bacterial activity. It was observed that the boron nanoparticles are effective in limiting the bacterial growth of both Gram-negative and positive species without requiring any stimulation to initiate the antibacterial action. In addition to the antibacterial functionality evaluation of the free boron nanoparticles, nanoboron coated textiles were also characterized and determined to change the wettability and surface charge of the textiles with a variable antimicrobial response to the different species. Consequently, we propose pure nanoboron as a new anti-bacterial agent that can function without external stimulation.     

Effect of wastewater composition on archaeal population diversity

Distribution and occurrence of Archaea and methanogenic activity in a laboratory scale, completely mixed anaerobic reactor treating pharmaceutical wastewaters were investigated and associated with reactor performance. The reactor was initially seeded with anaerobic digester sludge from an alcohol distillery wastewater treatment plant and was subjected to a three step feeding strategy. The feeding procedure involved gradual transition from a glucose containing feed to a solvent stripped pharmaceutical wastewater and then raw pharmaceutical wastewater. During the start-up period, over 90% COD removal efficiency at an organic loading rate (OLR) of 6 kg COD m(-3)d(-1) was achieved with glucose feeding, and acetoclastic methanogenic activity was 336 ml CH4 gTVS(-1)d(-1). At the end of the primary loading, when the feed contained solvent stripped pharmaceutical wastewater at full composition, 71% soluble COD removal efficiency was obtained and acetoclastic methanogenic activity decreased to half of the rate under glucose feed (166 ml CH4 gTVS(-1)d(-1)). At the end of secondary loading with 60% (w/v) raw pharmaceutical wastewater, COD removal dropped to zero and acetoclastic methanogenic activity fell to less than 10 ml CH4 gTVS(-1)d(-1). Throughout the course of the experiment, microbial community structure was monitored by DGGE analysis of 16S rRNA gene fragments. Five different archaeal taxa were identified and the predominant archaeal sequences belonged to methanogenic Archaea. Two of these showed greatest sequence identity with Methanobacterium formicicum and Methanosaeta concilii. The types of Archaea present changed little in response to changing feed composition but the relative contribution of different organisms identified in the archaeal DGGE profiles did change.     

Ligand exchange based paraoxon imprınted QCM sensor

In the present work, a paraoxon imprinted QCM sensor has been developed for the determination of paraoxon based on the modification of paraoxon imprinted film onto a quartz crystal combining the advantages of high selectivity of the piezoelectric microgravimetry using MIP film technique and high sensitivity of QCM detection. The paraoxon selective memories have formed on QCM electrode surface by using a new metal–chelate interaction based on pre-organized monomer and the paraoxon recognition activity of these molecular memories was investigated. Molecular imprinted polymer (MIP) film for the detection of paraoxon was developed and the analytical performance of paraoxon imprinted sensor was studied. The molecular imprinted polymer were characterized by FTIR measurements. Paraoxon imprinted sensor was characterized with AFM and ellipsometer. The study also includes the measurement of binding interaction of paraoxon imprinted quartz crystal microbalance (QCM) sensor, selectivity experiments and analytical performance of QCM electrode. The detection limit and the affinity constant (K_affinity) were found to be 0.06 μM and 2.25 × 10⁴ M^? 1 for paraoxon [MAAP–Cu(II)–paraoxon] based thin film, respectively. Also, it has been observed that the selectivity of the prepared paraoxon imprinted sensor is high compared to a similar chemical structure which is parathion.     

Experimental analysis of the effect of some compaction methods on mechanical properties and durability of cement stabilized soil

Cement stabilized soil is usually compacted by different mechanical methods to increase its strength and durability. This paper summarizes the results of an experimental study on the effect of different compaction methods on the performance of stabilized soil. The compaction methods investigated were either static compaction by applying a static pressure using an universal compression testing machine, dynamic compaction by a drop weight method, or static compaction coupled with vibration. All methods were applied on unstabilized soil or cement stabilized soil. The effect of each method of stabilization on compressive strength, shrinkage and water resistance are reported. Dynamic compaction with about 8% of cement content seems to give the best performance for the soil investigated.