The effect of post surface silanization and luting agents on the push-out bond strengths of adhesively inserted fiber reinforced posts

The effect of silane treatment on the push-out bond strengths of three different luting agents to fiber-reinforced composite (FRC) posts after thermocycling was evaluated.Sixty single-rooted human maxillary central incisors were sectioned below the cemento-enamel junction, and the roots were endodontically treated. RelyX Fiber Posts (size #2) were inserted using etch-and-rinse, self-etch, and self-adhesive luting agents (cementing agents). For half of the specimen in each group, the fiber posts were treated with a silane coupling agent. Bonded specimens were cut (2-mm-thick sections) and push-out tests were performed (crosshead speed, 0.5 mm/min). Failure modes were evaluated using a stereomicroscope at original magnification ×40.For each luting agent the use of silane did not result in any statistically significant difference at any level of the root compared to those of the control groups except for Variolink II and RelyX Unicem luting agents in apical root section (p<0.05; one-way ANOVA). The post hoc analysis showed that regardless of the pre-treatment procedures, Variolink II achieved significantly higher bond strengths than Panavia F 2.0 and RelyX Unicem in all root sections (p<0.05).The use of a silane coupling agent had no influence on bond strengths depending on the luting agent used, whereas the type of luting agent (etch-and-rinse, self-etch, and self-adhesive) appeared to be a significant influence on the push-out bond strength values independent of the pre-treatment used. Therefore, pre-treatment of fiber posts with a silane coupling agent does not seem to be mandatory, which saves time in the clinical situation.     

The effects of achromatic and chromatic color schemes on participants' task performance in and appraisals of an office environment

This study explores the effects of chroma on participants' performance and environmental appraisal of an office. The research was conducted in a full‐scale experimental room designed as a private office where achromatic and chromatic color schemes with coequal values were applied. Sixty participants were assigned tasks and given a questionnaire to appraise the spatial color schemes. The findings show that chroma significantly affects performance and space appraisal. In terms of accuracy and time spent performance scores measured significantly better in the room with the chromatic scheme than those in the room with the achromatic scheme. The office with the chromatic scheme was found to be more pleasant, attractive, satisfying and dynamic than the one with the achromatic scheme, whereas the achromatic scheme was thought to be more formal and harmonious. Categorization of pleasantness, harmony, dynamism and spaciousness by factor analysis also showed differences between the achromatic and chromatic schemes. © 2011 Wiley Periodicals, Inc. Col Res Appl, 2012     

Excitation energy-dependent nature of Raman scattering spectrum in GaInNAs/GaAs quantum well structures

The excitation energy-dependent nature of Raman scattering spectrum, vibration, electronic or both, has been studied using different excitation sources on as-grown and annealed n- and p-type modulation-doped Ga_1 − xIn_xN_yAs_1 − y/GaAs quantum well structures. The samples were grown by molecular beam technique with different N concentrations (y = 0%, 0.9%, 1.2%, 1.7%) at the same In concentration of 32%. Micro-Raman measurements have been carried out using 532 and 758 nm lines of diode lasers, and the 1064 nm line of the Nd-YAG laser has been used for Fourier transform-Raman scattering measurements. Raman scattering measurements with different excitation sources have revealed that the excitation energy is the decisive mechanism on the nature of the Raman scattering spectrum. When the excitation energy is close to the electronic band gap energy of any constituent semiconductor materials in the sample, electronic transition dominates the spectrum, leading to a very broad peak. In the condition that the excitation energy is much higher than the band gap energy, only vibrational modes contribute to the Raman scattering spectrum of the samples. Line shapes of the Raman scattering spectrum with the 785 and 1064 nm lines of lasers have been observed to be very broad peaks, whose absolute peak energy values are in good agreement with the ones obtained from photoluminescence measurements. On the other hand, Raman scattering spectrum with the 532 nm line has exhibited only vibrational modes. As a complementary tool of Raman scattering measurements with the excitation source of 532 nm, which shows weak vibrational transitions, attenuated total reflectance infrared spectroscopy has been also carried out. The results exhibited that the nature of the Raman scattering spectrum is strongly excitation energy-dependent, and with suitable excitation energy, electronic and/or vibrational transitions can be investigated.     

Raman Spectroscopic Barcode Use for Differentiation of Vegetable Oils and Determination of Their Major Fatty Acid Composition

In this study, differentiation of vegetable oils and determination of their major fatty acid (FA) composition were performed using Raman spectral barcoding approach. Samples from seven different sources (sunflower, corn, olive, canola, mustard, soybean and palm) were analyzed using Raman spectroscopy. Second derivative of the spectral data was utilized to generate unique barcodes of oils. Chemometric analyses, namely, principal component analysis (PCA) and partial least square (PLS) methods were used for data analysis. PCA was applied for classification of the samples according to the differences in their levels arising from their barcode data. A successful differentiation based on second derivative barcodes of Raman spectra (2D‐BRS) of vegetable oils was obtained. In addition, PLS method was applied on 2D‐BRS in order to determine the major FA composition of these samples. Coefficient of determination values for palmitic, stearic, oleic, linoleic, α‐linolenic, cis‐11 eicosenoic, erucic and nervonic acids were in the range of 0.970–0.989. Limit of detection and limit of quantification values were found to be satisfactory (0.09–8.09 and 0.30–26.95 % in oil) for these fatty acids . Advantages of both chemometric analysis and spectral barcoding approach have been utilized in the present study. Taking the second derivative of the Raman spectra has minimized background variability and sensitivity to intensity fluctuations. Spectral conversion to the barcodes has further increased the quality of information obtained from Raman spectra and also made it possible to improve the visualization of the data. Converting Raman spectra of oils into barcodes enables simpler presentation of the valuable information, and still allows further analysis such as classification of vegetable oils and prediction of their major fatty acids with high accuracy.     

Comparison of additive effects on the PVA/starch cryogels: Synthesis,characterization, cytotoxicity,and genotoxicity studies

The research goal of this study is to produce suitable scaffolds for tissue engineering applications. Different ratios of polyvinyl alcohol (PVA)/starch (90:10, 70:30, 50:50) and crosslinking methods have been used to prepare cryogels. Chemically crosslinked cryogels were synthesized using glutaraldehyde as the crosslinking agent. For the physically crosslinked cryogels, sodium dodecyl sulfate was used during cryogelation as the foaming agent. Chemical structure and pore morphology were demonstrated by Fourier transform infrared spectroscopy and scanning electron microscopy (SEM). Swelling ratio and degradation profile of the scaffolds were also determined. 3-(4,5-dimethylthiazoyl-2-yl)-2,5-diphenyltetrazolium bromide assay and SEM were used to investigate the biocompatibility of the scaffolds and cell morphology. Genotoxicity test was performed to show DNA fragmentation. The overall results demonstrated that PVA/starch cryogels could have potentially appealing application as scaffolds for tissue engineering applications and additives affect the architecture and characteristic properties of the cryogels.     

Processing‐structure‐property relationship in rigid polyurethane foams

Rigid polyurethane (PU) foam is used as a thermal insulating and supporting material in domestic refrigerator/freezers and it is produced by reaction injection molding (RIM) process. There is a need to improve the thermal property of rigid PU foam but this is still a challenging problem. Accordingly, this work investigates the RIM process parameters to evaluate their effects on rigid PU foam's structure and hence property. It has been found that mold temperature is a key parameter whereas curing time has negligible effect on structure of PU foam. Cell size, strut thickness, and foam density have been found very critical in controlling the thermal and mechanical properties. Upper and lower values of 30 to 32 kg/m³ density are critical to observe contribution of radiation and solid conductivity separately. Finally, PU foam with 160 µm average cell size, 16 µm strut thickness, below 10% open cell content, and 30 to 32 kg/m³ density allow obtaining better thermal insulation without significant reducing in the compressive strength. The presented work provides a better understanding of processing‐structure‐property relationship to gain knowledge on producing high‐quality rigid PU foams with improved properties. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44870.     

An antibacterial composite system based on multi-responsive microgels hosting monodisperse gold nanoparticles

A multi-responsive microgel having response to pH, temperature, and salt concentration was successfully prepared using a water-soluble monomer. Microgels were readily prepared from 2-(N-morpholino)ethyl methacrylate (MEMA) via emulsion polymerization using glycidyl methacrylate as a comonomer cross-linker. The morpholino groups of MEMA residues of microgels were able to give complexation with metal containing anions such as AuCl₄ ^? in acidic conditions. The reduction of aurate ions with sodium borohydride led to immobilized-gold nanoparticles (AuNP) in the microgel system. Average particle diameters of AuNPs were determined to be 10 ± 2 nm. The resulting AuNP-microgel system was examined as a nanoreactor for catalyst system and determined to be very effective in the reduction of 4-nitrophenol model reaction in aqueous media. AuNPs-microgel composite system had antibacterial properties against several Gram-positive and Gram-negative bacteria similar to amoxicillin. This P(MEMA-co-GMA) microgel is also very useful for different applications such as a host for metal nanoparticle production, a drug carrier or drug delivery system.     

Amperometric alcohol biosensors based on conducting polymers: Polypyrrole,poly(3,4-ethylenedioxythiophene) and poly(3,4-ethylenedioxypyrrole)

Alcohol biosensors based on conducting polypyrrole (PPy), poly(3,4-ethylenedioxythiophene) (PEDOT) and poly(3,4-ethylenedioxypyrrole) (PEDOP) were constructed. Alcohol oxidase (AlcOx, from Pichia pastoris) was immobilized during electropolymerization of the monomers in sodium dodecylsulfate (SDS) and phosphate buffer electrolysis medium. Optimization of several parameters was carried out. The highest affinity was observed for the PEDOT/AlcOx sensor. Lowry protein determination method was also used to calculate the amount of immobilized enzyme in sensors. Before testing the biosensors on alcoholic beverages effects of interferents (glucose, acetic acid, citric acid, and l-ascorbic acid) were determined. The alcohol contents of the distilled beverages (vodka, dry cin, whisky, and rak?) were determined with the sensors constructed. A good match with the chromatography results was observed.