Interaction of ventral and orbital prefrontal cortex with inferotemporal cortex in conditional visuomotor learning.

Five rhesus monkeys (Macaca mulatta) were trained to learn novel conditional visuomotor associations, to perform this task with familiar stimuli, and to perform a visual matching-to-sample task with the same familiar stimuli. Removal of the orbital and ventral prefrontal cortex (PFv+o) in 1 hemisphere and inferotemporal cortex (IT) in the other, thus completing a surgical disconnection of these 2 regions, yielded an impairment on all 3 tasks. Addition of a premotor cortex lesion to the hemisphere containing the PFv+o lesion did not worsen the impairments. The results indicate that PFv+o interacts with IT in both the learning and retention of conditional visuomotor associations. In addition to those associations, which might be considered lower order rules for choosing a response, frontotemporal interaction also appears to be important for higher order rules, such as those involved in the matching task. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Efficient optimization of integrated aerodynamic–structural design

The introduction of composite materials is having a profound effect on the design process. Because these materials permit the designer to tailor material properties to improve structural, aerodynamic and acoustic performance, they require a more integrated multidisciplinary design process. Because of the complexity of the design process numerical optimization methods are required. The present paper is focused on a major difficulty associated with the multidisciplinary design optimization process—its enormous computational cost. We consider two approaches for reducing this computational burden: (i)development of efficient methods for cross-sensitivity calculation using perturbation methods; and (ii) the use of approximate numerical optimization procedures. Our efforts are concentrated upon combined aerodynamic-structural optimization. Results are presented for the integrated design of a sailplane wing. The impact of our computational procedures on the computational costs of integrated designs is discussed.     

Development of an improved falling ball viscometer for high-pressure measurements with supercritical CO2

This study presents the development of an improved technique for viscosity measurements under high pressure. The apparatus is based on the principle of the falling ball viscometer, implemented in a high-pressure autoclave fitted with visualisation windows. The originality here is that the balls fall through a tube open at both ends with a diameter slightly greater than that of the balls, allowing a simplified modelling and numerical simulation. A numerical approach has been used for viscosity determination. Calculations have been made with COMSOL Multiphysics^® with the laminar Navier-Stokes model for Newtonian mixtures. It includes the specific hydrodynamic effects without the need for a calibration fluid. However, validation experiments were carried out at atmospheric pressure with dimethylsulfoxide (DMSO) at 298, 308 and 318 K and with cocoa butter at 313 and 353 K, with values of viscosity in the range from 1.4 to 45.4 mPa s. Comparative measurements with literature data have been conducted with cocoa butter saturated with carbon dioxide at 313 and 353 K and for pressures ranging from 0.1 to 25 MPa. At 313 K, viscosity varies from 45.4 mPa s to 3.1 mPa s while at 353 K it varies from 12.4 to 1.9 mPa s. For both isotherms tested, within the range 0-15 MPa, the higher the CO₂ dissolution in the cocoa butter, the lower the viscosity. However, this decrease in viscosity is more pronounced at the lowest temperature. Above 15 MPa the CO₂ dissolution effect on viscosity becomes insignificant, i.e. within the experimental error, due to a counter effect linked with the high hydrostatic pressure. Furthermore, the limits of use of this method have been determined. This technique is revealed as reliable and can therefore be used with other binary systems.     

Immunological Response to Biodegradable Magnesium Implants

The use of biodegradable magnesium implants in pediatric trauma surgery would render surgical interventions for implant removal after tissue healing unnecessary, thereby preventing stress to the children and reducing therapy costs. In this study, we report on the immunological response to biodegradable magnesium implants—as an important aspect in evaluating biocompatibility—tested in a growing rat model. The focus of this study was to investigate the response of the innate immune system to either fast or slow degrading magnesium pins, which were implanted into the femoral bones of 5-week-old rats. The main alloying element of the fast-degrading alloy (ZX50) was Zn, while it was Y in the slow-degrading implant (WZ21). Our results demonstrate that degrading magnesium implants beneficially influence the immune system, especially in the first postoperative weeks but also during tissue healing and early bone remodeling. However, rodents with WZ21 pins showed a slightly decreased phagocytic ability during bone remodeling when the degradation rate reached its maximum. This may be due to the high release rate of the rare earth-element yttrium, which is potentially toxic. From our results we conclude that magnesium implants have a beneficial effect on the innate immune system but that there are some concerns regarding the use of yttrium-alloyed magnesium implants, especially in pediatric patients.     

Large-area Fabry-Perot modulator based on electro-optic polymers

We present a large-area electro-optic Fabry-Perot modulator utilizing a photoaddressable bis-azo polymer placed between two dielectric mirrors with an open aperture of 2 cm. A modulation efficiency of 1% at an effective modulation voltage of 20 V for a wavelength of 1.55 microm is demonstrated. By comparing distance tuning of the cavity with wavelength tuning, an effective electro-optic coefficient of -7 pm/V is measured.     

Catalytic and Electrochemical Properties of Doped Lanthanum Chromites as New Anode Materials for Solid Oxide Fuel Cells

Defective perovskites contained in the general formula La(Sr)Cr(Ru,Mn)O_3–δ are successfully synthesized by spray pyrolysis. Powders of high phase purity are obtained after annealing, and they are used to prepare homogeneous films by spray printing. From a catalytic point of view for the methane steam reforming, these powdered perovskites do not generate a carbon deposit. Catalytic results, focused on doped ruthenium perovskites, confirm that the insertion of ruthenium in the structure of the lanthanum chromite presents a real benefit for the methane steam reforming. The electrochemical properties of La(Sr)CrO_3–δ, either pure and doped with manganese, show that the perovskite films can be potential electrodes, depending on their doping, for hydrogen anodic oxidation in solid oxide fuel cells.     

The Hallagerbakken housing project in Holmlia,Norway: when welfare became business

The late 1970s and early 1980s witnessed one of the most influential shifts within the organisational system of production for Norwegian mass housing. Although the increased availability of resources following the Second World War and the discovery of North Sea oil put the Norwegian government in a favourable position for investing in state-sponsored housing programmes, such investments did not happen. Instead, the strong public responsibility for affordable housing as a right of all citizens was weakened, and housing evolved into a commodity to be traded primarily on the free market.

Hallagerbakken, a housing project within the Holmlia satellite town—the last large housing development in the south of Oslo—has been influenced by several of the changes that occurred in the housing sector during this period. The resulting hybrid housing typology represented an innovation in the Norwegian setting, and, as a result, the project provides a starting point for re-evaluating some of the shifts towards a more market-oriented reality within architecture and the built environment.     

Advanced sludge treatment affects extracellular polymeric substances to improve activated sludge dewatering

The management of wastewater sludge, now often referred to as biosolids, accounts for a major portion of the cost of the wastewater treatment process and represents significant technical challenges. In many wastewater treatment facilities, the bottleneck of the sludge handling system is the dewatering operation. Advanced sludge treatment (AST) processes have been developed in order to improve sludge dewatering and to facilitate handling and ultimate disposal. The authors have extensively reported lab-scale, semi-pilot and pilot investigations on either thermal and thermochemical processes, or chemical oxidation using hydrogen peroxide. To understand the action of these advanced sludge technologies, the essential role played by extracellular polymeric substances (EPS) needs to be understood. EPS form a highly hydrated biofilm matrix, in which the micro-organisms are embedded. Hence they are of considerable importance in the removal of pollutants from wastewater, in bioflocculation, in settling and in dewatering of activated sludge. The present paper reviews the characteristics of EPS and the influence of thermochemical and oxidation mechanisms on degradation and flocculation of EPS. Experimental investigations on waste activated sludge are conducted by the authors to evaluate the various literature findings. From the experiments, it is concluded that AST methods enhance cake dewaterability in two ways: (i) they degrade EPS proteins and polysaccharides reducing the EPS water retention properties; and (ii) they promote flocculation which reduces the amount of fine flocs.     

An optimisation strategy in a digital environment applied to neonatal chest imaging

The aim of this study was to find the optimum tube voltage for neonatal chest imaging in computed radiography. The study was designed to take full advantage of the benefits of digital imaging, for example, by comparing the tube voltages at constant effective dose. A phantom study using a living rabbit was first conducted. Images were collected at tube voltages ranging from 40 to 90 kV(p). The reproduction of four structures (central vessels, peripheral vessels, carina and thoracic vertebrae) was rated by 10 radiologists. The reproduction of both central and peripheral vessels was relatively independent of tube voltage. The carina was better reproduced at higher tube voltages whereas the opposite was true for the thoracic vertebrae. Based on the higher importance of the reproduction of the carina it was decided that 90 kV(p) was the optimal tube voltage. To validate the result from the phantom study, a follow-up study was conducted in which images of neonates collected at the tube voltage regularly used at Sahlgrenska University Hospital (70 kV(p)) were compared with images collected at the tube voltage proposed by the phantom study. The follow-up study confirmed the results from the phantom study that the reproduction of the carina was better at 90 than at 70 kV(p). In conclusion, for neonatal chest imaging-given the same effective dose-90 kVp gives better reproduction of important structures than the regularly used 70 kV(p).