Localized corrosion of (lean) duplex stainless steels in immersion units of urban wastewater treatment plants

With lower alloying cost and higher mechanical properties, lean duplex stainless steels can be an alternative to the more commonly used austenitic stainless steels. However, these alloys are still not the preferred choice, probably due to a lack of field experience. A study was thus initiated in view of defining the limits of use of selected (lean) duplexes for urban wastewater treatment units. The present paper shows the localized corrosion performance of selected lean duplexes in chloride contaminated solutions. The results are compared with austenitic S30403 and S31603 and with the more standard duplexes S82441 and S32205. The effect of welding was also investigated. Exposures in field municipal wastewater plants were conducted for 1 year in low and high chloride content units. The results show that lean duplexes S32101 and S32202 can be used as alternatives to S30403 and S31603 in low chloride electrolytes. At 500 ppm of chloride content, duplex stainless steel S32304 showed better corrosion resistance than S30403 and S31603. For higher chloride contents (1000 ppm and above) the standard duplexes S82441 and S32205 shall be preferred.     

Placental Villous Explant Culture 2.0: Flow Culture Allows Studies Closer to the In Vivo Situation

During pregnancy, freely floating placental villi are adapted to fluid shear stress due to placental perfusion with maternal plasma and blood. In vitro culture of placental villous explants is widely performed under static conditions, hoping the conditions may represent the in utero environment. However, static placental villous explant culture dramatically differs from the in vivo situation. Thus, we established a flow culture system for placental villous explants and compared commonly used static cultured tissue to flow cultured tissue using transmission and scanning electron microscopy, immunohistochemistry, and lactate dehydrogenase (LDH) and human chorionic gonadotropin (hCG) measurements. The data revealed a better structural and biochemical integrity of flow cultured tissue compared to static cultured tissue. Thus, this new flow system can be used to simulate the blood flow from the mother to the placenta and back in the most native-like in vitro system so far and thus can enable novel study designs.     

Is LRP2 Involved in Leptin Transport over the Blood-Brain Barrier and Development of Obesity?

The mechanisms underlying the transport of leptin into the brain are still largely unclear. While the leptin receptor has been implicated in the transport process, recent evidence has suggested an additional role of LRP2 (megalin). To evaluate the function of LRP2 for leptin transport across the blood-brain barrier (BBB), we developed a novel leptin-luciferase fusion protein (pLG), which stimulated leptin signaling and was transported in an in vitro BBB model based on porcine endothelial cells. The LRP inhibitor RAP did not affect leptin transport, arguing against a role of LRP2. In line with this, the selective deletion of LRP2 in brain endothelial cells and epithelial cells of the choroid plexus did not influence bodyweight, body composition, food intake, or energy expenditure of mice. These findings suggest that LRP2 at the BBB is not involved in the transport of leptin into the brain, nor in the development of obesity as has previously been described.     

Liver Lipids of Patients with Hepatitis B and C and Associated Hepatocellular Carcinoma

Hepatocellular carcinoma (HCC) still remains a difficult to cure malignancy. In recent years, the focus has shifted to lipid metabolism for the treatment of HCC. Very little is known about hepatitis B virus (HBV) and C virus (HCV)-related hepatic lipid disturbances in non-malignant and cancer tissues. The present study showed that triacylglycerol and cholesterol concentrations were similar in tumor adjacent HBV and HCV liver, and were not induced in the HCC tissues. Higher levels of free cholesterol, polyunsaturated phospholipids and diacylglycerol species were noted in non-tumorous HBV compared to HCV liver. Moreover, polyunsaturated phospholipids and diacylglycerols, and ceramides declined in tumors of HBV infected patients. All of these lipids remained unchanged in HCV-related HCC. In HCV tumors, polyunsaturated phosphatidylinositol levels were even induced. There were no associations of these lipid classes in non-tumor tissues with hepatic inflammation and fibrosis scores. Moreover, these lipids did not correlate with tumor grade or T-stage in HCC tissues. Lipid reprogramming of the three analysed HBV/HCV related tumors mostly resembled HBV-HCC. Indeed, lipid composition of non-tumorous HCV tissue, HCV tumors, HBV tumors and HBV/HCV tumors was highly similar. The tumor suppressor protein p53 regulates lipid metabolism. The p53 and p53S392 protein levels were induced in the tumors of HBV, HCV and double infected patients, and this was significant in HBV infection. Negative correlation of tumor p53 protein with free cholesterol indicates a role of p53 in cholesterol metabolism. In summary, the current study suggests that therapeutic strategies to target lipid metabolism in chronic viral hepatitis and associated cancers have to consider disease etiology.     

Host Plant Constancy in Ovipositing Manduca sexta

Journal of Chemical Ecology - Many pollinating insects exhibit flower constancy, i.e. they target flower species they have already experienced and fed from. While the insects might profit from...     

Removal of oxide nanoparticles in a model wastewater treatment plant: influence of agglomeration and surfactants on clearing efficiency

The rapidly increasing production of engineered nanoparticles has created a demand for particle removal from industrial and communal wastewater streams. Efficient removal is particularly important in view of increasing long-term persistence and evidence for considerable ecotoxicity of specific nanoparticles. The present work investigates the use of a model wastewater treatment plant for removal of oxide nanoparticles. While a majority of the nanoparticles could be captured through adhesion to clearing sludge, a significant fraction of the engineered nanoparticles escaped the wastewater plant's clearing system, and up to 6 wt % of the model compound cerium oxide was found in the exit stream of the model plant. Our study demonstrates a significant influence of surface charge and the addition of dispersion stabilizing surfactants as routinely used in the preparation of nanoparticle derived products. A detailed investigation on the agglomeration of oxide nanoparticles in wastewater streams revealed a high stabilization of the particles against clearance (adsorption on the bacteria from the sludge). This unexpected finding suggests a need to investigate nanoparticle clearance in more detail and demonstrates the complex interactions between dissolved species and the nanoparticles within the continuously changing environment of the clearing sludge.     

Thin films of La0.7Sr0.3MnO3−δ dip-coated on Fe–Cr alloys for SOFC metallic interconnect

La_0.7Sr_0.3MnO_3−δ (LSM) porous films were deposited on different ferritic stainless steels (SS) (430: Cr-16.0%; 439: Cr-16.6%; 444: Cr-17.4%) by sol–gel/dip-coating process. The structure, morphology and composition profiles of investigated assemblies were examined using X-ray diffraction, scanning electron microscopy and energy dispersive X-ray analysis. The area specific resistance (ASR) was measured during long term oxidation in air at 800 °C for 200 h by DC measurements. ASR values lower than 10 mΩ cm² were recorded after 200 h for LSM-coated SS439 and SS444. This is likely to be due to the high Cr content and to Nb, Ti and Mo elements used to stabilize the stainless steel against oxidation. This paper shows that LSM coatings provide an enhanced stability of the alloy at high temperature and the formation of an interfacial Cr–Mn spinel layer hinders the oxide scale growth.     

Colour improvement of common carp (Cyprinus carpio) fillets by hydrogen peroxide for surimi production

The preferred colour for surimi is white, but surimi prepared from light fillets of common carp (Cyprinus carpio) is slightly pink. Hydrogen peroxide (H₂O₂; 1–3% v/v) with and without sodium tri‐polyphosphate (STP; 1–2% w/v) was added to a sodium carbonate bath (pH 7.0–11.5) resulting in a final pH range of 4.4–10.1 which was injected into carp fillets. After soaking and tumbling for 30 min at 4–10 °C, the fillets were evaluated for colour and water holding capacity (WHC). Fillets tumbled with treatment solution with different pH levels (7.0–11.5), but with no H₂O₂ or STP added, had improved colour with significantly (P < 0.05) higher L* compared with untreated fillets as the control. However, the colour improvement [(L* and colour deviation (ΔE)] was not significantly different (P > 0.05) within the pH levels (7.0–11.5) trialled. With increasing H₂O₂ levels (1–3%), fillets became lighter and ΔE increased significantly (P < 0.05), especially with a 3% H₂O₂ treatment at pH of 10.5 (adjusted pH before H₂O₂ addition, actual pH after H₂O₂ addition was 8.2). The whiteness (L*?3b*) of kamaboko produced from treated (3% H₂O₂, pH 10.5) common carp light fillets was not significantly different to that of kamaboko from Alaska pollock and threadfin bream. Treatments combining H₂O₂ (3%) with STP (1–2%) significantly reduced the L* value obtained in comparison with fillets treated with only H₂O₂ (3%). Similarly, fillets treated with STP (1%) alone, resulting in lower L* values, irrespective of treatment pH (7.0–11.5). WHC, an indicator of the quality of the fillet texture, increased from 816 g/kg at pH 7.0 without STP to 841 g/kg at pH 11.5 with 1% STP. Treatment with H₂O₂ (without STP) decreased the WHC of the fillets.