Stress Heterogeneity Effect on the Strength of Silicon Nitride

The experiments reported in this paper demonstrate the causes of the failure of monolithic ceramics. The specimens are made of silicon nitride and tested at room temperature. The stress field within the specimen is different for each of four series of tests that have been conducted. Fractographic observations have also been made to identify the causes of the failures. A size effect analysis is performed.     

Improved methods for evaluating the molar mass distributions of cellulose in kraft pulp

Multi‐angle laser light scattering (MALLS) was used to characterize birch kraft pulps with respect to their absolute molecular mass distributions (MMDs). The pulps were dissolved in lithium chloride/N,N‐dimethylacetamide and separated by size exclusion chromatography (SEC). The weight‐average and number‐average molecular masses of the cellulose fractions of the pulps obtained from the absolute MALLS measurements were compared with the molar masses obtained by direct‐standard‐calibration relative pullulan standards. Discrepancies between the two detection methods were found, and two ways of correlating the relative pullulan molar masses to the absolute molar masses were examined. In the first method, the correlation was made over a large range of molecular masses. The second method correlated the molecular masses of the standards to the molecular masses of samples by the calculation of fictitious, cellulose‐equivalent molar masses of the standards. With the preferred second method, a more correct MMD of kraft pulp samples could, therefore, be obtained from an SEC system calibrated with narrow standards. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1170–1179, 2003     

GC–MS analysis of oxysterols and their formation in cultivated liver cells (HepG2)

Oxysterols play a key role in many (patho)physiological processes and they are potential biomarkers for oxidative stress in several diseases. Here we developed a rapid gas chromatographic-mass spectrometry-based method for the separation and quantification of 11 biologically relevant oxysterols bearing hydroxy, epoxy, and dihydroxy groups. Efficient chromatographic separation (resolution ≥ 1.9) was achieved using a medium polarity 35%-diphenyl/65%-dimethyl polysiloxane stationary phase material (30 m × 0.25 mm inner diameter and 0.25 μm film thickness). Based on thorough analysis of the fragmentation during electron ionization we developed a strategy to deduce structural information of the oxysterols. Optimized sample preparation includes (i) extraction with a mixture of n-hexane/iso-propanol, (ii) removal of cholesterol by solid phase extraction with unmodified silica, and (iii) trimethylsilylation. The method was successfully applied on the analysis of brain samples, showing consistent results with previous studies and a good intra- and interday precision of ≤20%. Finally, we used the method for the investigation of oxysterol formation during oxidative stress in HepG2 cells. Incubation with tert-butyl hydroperoxide led to a massive increase in free radical formed oxysterols (7-keto-chol > 7β-OH-chol >> 7α-OH-chol), while 24 h incubation with the glutathione peroxidase 4 inhibitor RSL3 showed no increase in oxidative stress based on the oxysterol pattern. Overall, the new method described here enables the robust analysis of a biologically meaningful pattern of oxysterols with high sensitivity and precision allowing us to gain new insights in the biological formation and role of oxysterols.     

Optimized Growth of Heteroepitaxial (111) NiFe2O4 Thin Films on (0001) Sapphire with Two In‐Plane Variants via Chemical Solution Deposition

(111)‐oriented epitaxial thin films of nickel ferrite (NFO) are grown on c‐plane sapphire [α‐Al₂O₃(0001)] substrates using a chemical solution deposition technique. The processing conditions, including pyrolysis and annealing temperatures, are varied to achieve a film that shows maximum texture and epitaxy. It is shown that increasing the pyrolysis temperature to 400°C and decreasing the annealing temperature to 750°C for 10 min result in the highest degree of texture in the films. Lower film thickness also leads to a higher degree of texture. Microstructural studies confirm an in‐plane epitaxial relationship between the (111) NFO film and the (0001) Al₂O₃ substrate in two variants, [110]_NFO || or .     

The Importance of Crosslinking and Glass Transition Temperature for the Mechanical Strength of Nanofibers Obtained by Green Electrospinning

Crosslinked particles containing butyl acrylate, methyl methacrylate, and allyl methacrylate are prepared by free‐radical emulsion polymerization. The glass transition temperatures of the polymers are varied by the crosslinking densities in the latex particles. Aqueous acrylate dispersions with polymers of different glass transition temperatures are electrospun with PVA as the matrix polymer. The effects of crosslinking density and T_g on the structure and mechanical properties of the fibers are studied. Crosslinking of unreacted allyl groups is induced by UV irradiation to stabilize the fibers by interparticle crosslinking. Both the ability to undergo interparticle crosslinking and the E modulus depend on the merging of the particles during the electrospinning process.

     

A Method for Evaluating Lignin Mobility Distributions Obtained by Capillary Zone Electrophoresis

Abstract

The profile of the mobility distribution of lignin-containing samples depends on type of sample. To facilitate comparison, a procedure for determining the average mobility (μ_av), i.e. the average charge density, of lignin is presented. The procedure is applied to black liquor (Sb), isolated dissolved lignin (Sd) and isolated residual (Sr) lignin samples, obtained from flow-through kraft cooks of softwood. The μ_av of the isolated lignin samples is compared with the concentration of phenol and carboxyl groups and relative molecular size. As the cook proceeds the μ_av for a particular type of lignin sample increases, reflecting an increase in average charge density. The μ_av, measured at pH 12, decreases in the order Sd>Sb>Sr, except at the end of the cook, when the average charge densities of the Sb and Sr samples are similar. Associations between lignin and carbohydrate fragments are proposed to cause the lower mobility of black liquor compared to isolated dissolved lignin. Characterisations performed at pH 10 indicate that the isolated dissolved lignin samples may have a higher pK_a in the middle of the cook than the other samples.     

Homogeneous dispersion of SiO2 nanoparticles in an hydrosoluble polymeric network

The main difficulty still encountered in the elaboration of polymer/silica nanocomposites is the control of the nanoparticles dispersion homogeneity and the stability of the nanoparticle dispersion in the surrounding substance. The innovative point of this work is the elaboration of hybrid networks in aqueous solution performed with ASE (alkali swellable emulsion) thickeners grafted with silica nanoparticles. The thickening ability of the polymer should favour silica nanoparticles dispersion in fluid matrices. Two ASE copolymers were realised by copolymerisation in emulsion of MA (methacrylic acid) and EA (ethyl acrylate) and/or TFEM (trifluoroethyl methacrylate). The substitution of a part of EA by TFEM gave fluorinated ASE copolymers. Their free acid functions were then coupled with different ratio of amine functionalized silica nanoparticles to afford nanocomposites. The amounts of silica nanoparticles in the copolymers were determined by thermogravimetric experiments. Depending on the silica nanoparticles/copolymer ratio in basic aqueous solutions we achieved stable translucent gel like aqueous suspensions of silica nanoparticles containing 1 wt.% of the polymer/SiO₂ nanocomposite.     

Rhodium‐Catalyzed Homogeneous Reductive Amidation of Aldehydes

The catalytic reductive amidation of an aldehyde (hexanal) with an amide (acetamide) is reported. Apart from the desired N‐hexylacetamide, the two isomeric unsaturated intermediates as well as hexanol are produced together with higher mass products that arise from aldol condensation and diamide coupling of the aldehyde. Screening of different catalyst precursor salts, ligands and reaction conditions led to the finding that the catalytic system based on the (cyclooctadiene)rhodium chloride dimer, [Rh(cod)Cl]₂, in combination with the ligand xantphos and an acid co‐catalyst results in high selectivity for the desired product. Under optimized conditions nearly full conversion is reached with high selectivity to the desired N‐alkylamide and with a very high N ‐ alkylamide/alcohol ratio, while producing only small amounts of by‐products. The scope of the reaction has been investigated using different amides as well as aldehydes; the results show the general applicability of this novel reaction, but with electron‐withdrawing amides the selectivity to N‐alkylamide is lower. NMR studies showed that the nucleophilic addition of acetamide to hexanal is acid catalyzed, forming N‐(1‐hydroxyhexyl)acetamide in equilibrium with both hexanal and the dehydrated unsaturated imides. A catalytic mechanism is proposed in which a strong acid such as HOTs acts as a co‐catalyst by establishing a rapid chemical equilibrium between the aldehyde, acetamide and the intermediates. Furthermore, it is proposed that the presence of acid causes a change in catalytic species, enabling a cationic Rh/xantphos hydrogenation catalyst to selectively hydrogenate the intermediates to N‐hexylacetamide in the presence of hexanal.     

Rapid and Green Analytical Method for the Determination of Quinoline Alkaloids from Cinchona succirubra Based on Microwave-Integrated Extraction and Leaching (MIEL) Prior to High Performance Liquid Chromatography

Quinas contains several compounds, such as quinoline alkaloids, principally quinine, quinidine, cinchonine and cichonidine. Identified from barks of Cinchona, quinine is still commonly used to treat human malaria. Microwave-Integrated Extraction and Leaching (MIEL) is proposed for the extraction of quinoline alkaloids from bark of Cinchona succirubra. The process is performed in four steps, which ensures complete, rapid and accurate extraction of the samples. Optimal conditions for extraction were obtained using a response surface methodology reached from a central composite design. The MIEL extraction has been compared with a conventional technique soxhlet extraction. The extracts of quinoline alkaloids from C. succirubra obtained by these two different methods were compared by HPLC. The extracts obtained by MIEL in 32 min were quantitatively (yield) and qualitatively (quinine, quinidine, cinchonine, cinchonidine) similar to those obtained by conventional Soxhlet extraction in 3 hours. MIEL is a green technology that serves as a good alternative for the extraction of Cinchona alkaloids.     

Experimental and modelling of supercritical oil extraction from rapeseeds and sunflower seeds

The supercritical oil extraction from oleaginous seeds (sunflower and rapeseeds) is presented here through experimental and modelling results. The experimental setup allows an accurate following of the mass of the oil extracted and to derive the experimental influences of pressure, temperature and supercritical CO₂ flowrate on the extraction curves. These parameters are very sensitive and highlight the necessity of precise optimisation of experimental conditions. In order to complete the behaviour of supercritical fluids extraction, an improved modelling is proposed. The modelling basic equations are based on others modelling published previously. In this work, the determination of several parameters comes from correlations and the other constants are fitted with all the experimental results. Thus the modelling is more representative and predictive as other ones. The modelling results present a good agreement with the experimental results, and hence it can be used for the dimensioning of some extraction autoclaves.