Experimental and theoretical investigations on the adsorption of 2'-deoxyguanosine oxidation products at oxidized boron-doped diamond electrodes

Electrochemical oxidation of 2'-deoxyguanosine has been performed on boron-doped diamond (BDD) electrodes, resulting in a strong adsorption of the formed oxidized products onto the BDD surface. The adsorption behavior has been investigated by studying the electrochemical behavior of a redox probe ([IrCl6]3-) using cyclic voltammetry. The most probable situations are the formation of (A) an insulating adsorbed film resulting in a partially blocked electrode behavior, (B) a porous film, or (C) an overall conductive film. Different parameters such as the standard rate constant, the charge-transfer coefficient, the electrode/adsorbed products/solution interface resistance, and the formal potential of the redox couple were determined. Through comparison of theoretical current-potential curves obtained by analytical calculations with experimental cyclic voltammograms, we found that the oxidized products of 2'-deoxyguanosine form a continuous conductive film on BDD.     

Expression Pattern of Purinergic Signaling Components in Colorectal Cancer Cells and Differential Cellular Outcomes Induced by Extracellular ATP and Adenosine

The purine nucleotide adenosine triphosphate (ATP) is known for its fundamental role in cellular bioenergetics. However, in the last decades, different works have described emerging functions for ATP, such as that of a danger signaling molecule acting in the extracellular space on both tumor and stromal compartments. Beside its role in immune cell signaling, several studies have shown that high concentrations of extracellular ATP can directly or indirectly act on cancer cells. Accordingly, it has been reported that purinergic receptors are widely expressed in tumor cells. However, their expression pattern is often associated with contradictory cellular outcomes. In this work, we first investigated gene expression profiles through “RNA-Sequencing” (RNA Seq) technology in four colorectal cancer (CRC) cell lines (HT29, LS513, LS174T, HCT116). Our results demonstrate that CRC cells mostly express the A2B, P2X4, P2Y1, P2Y2 and P2Y11 purinergic receptors. Among these, the P2Y1 and P2Y2 coding genes are markedly overexpressed in all CRC cells compared to the HCEC-1CT normal-like colonic cells. We then explored the cellular outcomes induced by extracellular ATP and adenosine. Our results show that in terms of cell death induction extracellular ATP is consistently more active than adenosine against CRC, while neither compound affected normal-like colonic cell survival. Intriguingly, while for the P2Y2 receptor pharmacological inhibition completely abolished the rise in cytoplasmic Ca²⁺ observed after ATP exposure in all CRC cell lines, Ca²⁺ mobilization only impacted the cellular outcome for HT29. In contrast, non-selective phosphodiesterase inhibition completely abolished the effects of extracellular ATP on CRC cells, suggesting that cAMP and/or cGMP levels might determine cellular outcome. Altogether, our study provides novel insights into the characterization of purinergic signaling in CRC.     

Materials Mechanics – The Basis of Advanced Technology for Ageing Aircraft

Materials mechanics plays a significant role in assessing the damage status and handling of an ageing aircraft. This paper deals with determination and use of operational loads monitoring regarding fatigue life evaluation at specifically damage critical locations as well as the resulting consequences in fleet management. Regarding damage‐tolerant design specifically aspects such as simulation of multi‐site damage cracking and optimised design of repairs are discussed. Finally some recent techniques and results with regard to structure integrated sensing in the context of smart structures is presented.     

Modeling of copper sorption onto GFH and design of full-scale GFH adsorbers

During rain events, copper wash-off occurring from copper roofs results in environmental hazards. In this study, columns filled with granulated ferric hydroxide (GFH) were used to treat copper-containing roof runoff. It was shown that copper could be removed to a high extent. A model was developed to describe this removal process. The model was based on the Two Region Model (TRM), extended with an additional diffusion zone. The extended model was able to describe the copper removal in long-term experiments (up to 125 days) with variable flow rates reflecting realistic runoff events. The four parameters of the model were estimated based on data gained with specific column experiments according to maximum sensitivity for each parameter. After model validation, the parameter set was used for the design of full-scale adsorbers. These full-scale adsorbers show high removal rates during extended periods of time.     

Chicken fat dry fractionation: Effects of temperature and time on crystallization,filtration and fraction properties

A surface response experimental design was used to quantify the effects of the final cooling temperature and the residence time at this temperature on the filtration characteristics of the crystal suspension and the quality of the fractions during chicken fat dry fractionation. The crystal morphology was monitored to gain insight into the observed effects. Temperature affected crystallization and the characteristics of the olein and stearin fractions. The crystals became fragmented as the residence time increased, thus leading to a decrease in the filterability of the crystal suspension and an increase in the proportion of the entrained liquid phase. The residence time only affected the quality of the stearin fraction. This time effect was noted at high cooling temperatures in the investigated experimental domain. At low temperatures, increasing the residence time enhanced crystal growth and increased the extent of unsaturation of both fractions without modifying the filtration features.     

New 2-Methyl-13-Icosenoic Acid from the Temperate Calcisponge <Emphasis Type="Italic">Leuconia johnstoni</Emphasis>

The fatty acid composition of the temperate calcareous marine sponge Leuconia johnstoni Carter 1871 (Calcaronea, Calcarea) was characterized for the first time in specimens collected off the Brittany coast of France over four years from October 2005 to September 2008. Forty-one fatty acids (FA) with chain lengths ranging from C₁₄ to C₂₂ were identified as fatty methyl esters (FAME) and N-acyl pyrrolidide (NAP) derivatives by gas chromatography–mass spectrometry (GC–MS). Twenty-two saturated fatty acids (SFA) were identified accounting for 52.1–59.0% of the total FA and dimethylacetals (DMA). In addition, among the SFA, we noticed the presence of numerous methyl-branched iso and anteiso FA, suggesting a large number of associated bacteria within L. johnstoni. Thirteen monounsaturated fatty acids (MUFA, 28.0–36.0% of total FA + DMA) were also identified as well as six polyunsaturated fatty acids (PUFA, 4.0–8.2%). A noticeable DMA was detected at a high level, particularly in September 2008 (11.8%), indicating the presence of plasmalogens in this sponge species. This calcareous sponge lacked the non-methylene-interrupted FA (NMI FA) with a Δ5,9 system typical of siliceous Demosponges and Hexactinellids. The occurrence of the unusual 8,13-octadecadienoic acid was reported for the first time as a minor PUFA in a calcareous sponge. The major FA, representing 20–25% of this sponge FA, was identified as the new 2-methyl-13-icosenoic acid from mass spectra of its methyl ester and its corresponding N-acyl pyrrolidide derivatives as well as a dimethyl disulfide adduct.     

Statistical study of the influence of building architectural properties on scattered fields in urban environment

Statistical studies on the reflection coefficient of concrete–glass building facades are conducted using a fast and an accurate method based on the Green’s functions. The variation of different architectural parameters, such as concrete permitting and distribution, size and type of windows, are studied. The influence of selected parameters on the total reflection coefficient of the building is quantified for different incidence and observation angles as well as in different diffraction zones.     

RAB10 Interacts with ABCB4 and Regulates Its Intracellular Traffic

ABCB4 (ATP-binding cassette subfamily B member 4) is an ABC transporter expressed at the canalicular membrane of hepatocytes where it ensures phosphatidylcholine secretion into bile. Genetic variations of ABCB4 are associated with several rare cholestatic diseases. The available treatments are not efficient for a significant proportion of patients with ABCB4-related diseases and liver transplantation is often required. The development of novel therapies requires a deep understanding of the molecular mechanisms regulating ABCB4 expression, intracellular traffic, and function. Using an immunoprecipitation approach combined with mass spectrometry analyses, we have identified the small GTPase RAB10 as a novel molecular partner of ABCB4. Our results indicate that the overexpression of wild type RAB10 or its dominant-active mutant significantly increases the amount of ABCB4 at the plasma membrane expression and its phosphatidylcholine floppase function. Contrariwise, RAB10 silencing induces the intracellular retention of ABCB4 and then indirectly diminishes its secretory function. Taken together, our findings suggest that RAB10 regulates the plasma membrane targeting of ABCB4 and consequently its capacity to mediate phosphatidylcholine secretion.     

Interpenetrating polymer networks derived from silylated soybean oil and polydimethylsiloxane

A series of interpenetrating polymer networks (IPNs) was prepared using various concentrations of silylated soybean oil and polydimethylsiloxane (PDMS) that were cross linked with inorganic silicates. This series of IPNs was prepared from emulsions of silylated soybean oil and PDMS together with colloidal silica and dioctyltin dilaurate catalyst at pH 10. Under these conditions, water soluble silicates reacted with silanols in the oil phase and formed intraparticle siloxane cross links. Upon casting films and evaporation of the water, additional interparticle cross linking were obtained between the coagulating particles to produce entangled networks of soybean oil and PDMS that were further reinforced by fine silica particles. The morphology revealed intimate mixing of the two immiscible components. The mechanical properties depended on the ratio of the soft, flexible PDMS phase and the rigid, brittle cross linked silylated soybean oil phase. These IPNs can be used as high release liners, low friction materials, or as a general protective coating. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2479–2486, 2013     

Effect of Clay Modification on the Mechanism of Local Deformations in PA6 Nanocomposites

PA nanocomposites are prepared from clays organophilized with a phosphonium and an ammonium salt, and sodium montmorillonite is used as reference. The analysis of mechanical and micromechanical properties of the composites reveal that several micromechanical deformation processes occur in the PA/MMT composites. The matrix cavitates at relatively small stress. Processes related to non‐exfoliated clay structural units are initiated at larger stresses. Sound is emitted mainly by the fracture of particles, but debonding may also occur. The plastic deformation of the matrix dominates at larger stresses and deformations. The various local deformations are independent of each other and composite properties are not determined by silicate related processes but by the deformation of the matrix.