Characterization of titanium alloy implant surfaces with improved dissolution resistance

The present work sets out to investigate the structure and chemistry of surface treated oxides (either aged in boiling water or air-heated) with improved dissolution resistance compared to conventionally passivated surfaces. X-ray photoelectron spectroscopy (XPS) has demonstrated a significant reduction in oxidized aluminium associated with an ageing-based surface treatment. Angle-dependent XPS has revealed an increase in amphoteric-OH surface sites for the thermal treatments. Atomic force microscopy (AFM) investigation suggests that these sites play a role in the improved proteinadsorption properties of these surfaces. These observations form the basis of a model which describes the influence of surface oxide on the kinetics of metal ion dissolution.     

Cytotoxicity versus antibacterial activity of some antiseptics in vitro

The relationship between endometriosis and infertility is observed frequently. Patients with both conditions require a conservative approach to their management. Since hormonal therapy is one of those approaches, we sought to compare the efficacy of Danazol and Gestrinone in 80 infertile patients (48 and 32, respectively). Therapy lasted 6 months in both treatment groups, and all patients studied had laboratory tests performed and were clinically evaluated and classified through laparoscopy before and after therapy. The improvement of symptoms and favorable follow-up were similar with both treatments. The reestablishment of menstrual patterns and fertility were also nearly alike in both groups. However, Gestrinone was associated with fewer secondary effects and is easier to administer than Danazol. We conclude that Gestrinone is a useful medication in the management of the infertile patient with endometriosis.     

Ozone micro-bubble disinfection method for wastewater reuse system.

Reuse of wastewater is regarded as one important way to deal with the world's shortage of potable water. The authors focused on a disinfection system using micro-bubbles and evaluated its capability for wastewater reuse. This paper reports experimental results from examination of the basic characteristics of micro-bubbles and disinfection of secondary effluent by air or ozone micro-bubbles. The results suggest that when micro-bubbles are applied in an ozonation system it is possible to reduce the reactor size, the amount of ozone decomposition equipment needed and the ozone dose rate.     

Removal of endocrine disrupting chemicals (EDCs) using low pressure reverse osmosis membrane (LPROM).

Endocrine disrupting chemicals (EDCs) are the focus of current environmental issues, as they can cause adverse health effects to animals and human, subsequent to endocrine function. The objective of this study was to remove a specific compound of EDCs (i.e. pentachlorophenol, C(6)OCL(5)Na, molecular weight of 288 g/mol) using low pressure reverse osmosis membrane (LPROM). A cross flow module of LPROM was used to observe the effects of operating parameters, i.e. pH, operating pressure and temperature. The design of the experiment was based on MINITAB(TM) software, and the analysis of results was conducted by factorial analysis. It was found that the rejection of pentachlorophenol was higher than 80% at a recovery rate of 60 to 70%. The rejection was subjected to increase with the increase of pH. The flux was observed to be increased with the increase of operating pressure and temperature. This study also investigated the interaction effects between operating parameters involved.     

The impact of cleaner processing on nutrient availability in the bleached kraft industry.

The pulp and paper industry has invested heavily over recent years in cleaner processing, to reduce losses and minimise its impact on the environment. Over the past fifteen years, a New Zealand integrated bleached kraft mill has undergone a comprehensive programme of upgrades to increase production, reduce water consumption and streamline its biological treatment process. Whilst the overall discharge of contaminants from the site decreased, the treatment system performance did not show a concurrent improvement as may have been expected. Reduced BOD removal, low dissolved oxygen levels, and poor solids settlability were symptomatic of phosphorus limitation in the aerated lagoon treatment system. The wastewater entering the system was found to be phosphorus limited at a BOD:P ratio of 100:0.2. Mono-ammonium-phosphate was supplemented, at approximately 30 kg P/d, to raise the phosphorus levels to a BOD:P ratio of 100:0.3. Treatment efficiencies improved very quickly after phosphorus dosage, with a 50% reduction in BOD and TSS discharge, a significant increase in dissolved oxygen levels, and improved BOD removal (85% to 93%). This case study demonstrates that whilst more closed operation can result in reduced discharge of organic loads, there may be negative impacts on the availability of nutrients for balanced biological growth.     

Seven strategies for tolerating highly defective fabrication

This article we present an architecture that supports fine-grained sparing and resource matching. The base logic structure is a set of interconnected PLAs. The PLAs and their interconnections consist of large arrays of interchangeable nanowires, which serve as programmable product and sum terms and as programmable interconnect links. Each nanowire can have several defective programmable junctions. We can test nanowires for functionality and use only the subset that provides appropriate conductivity and electrical characteristics. We then perform a matching between nanowire junction programmability and application logic needs to use almost all the nanowires even though most of them have defective junctions. We employ seven high-level strategies to achieve this level of defect tolerance.     

Laser scanning path generation considering photopolymer solidification in micro-stereolithography

It is essential to automate the scanning path generation process to effectively implement the micro-stereolithography. However, a scanning path that is generated based only on a 3D CAD model introduces dimensional inaccuracies. In micro-stereolithography, the photopolymer solidification is affected by fabrication conditions, such as the optical properties (laser power, laser scanning speed, laser scanning pitch focusing condition, etc.) and material properties of the photopolymer. Thus, the photopolymer solidification phenomena must be considered when generating a laser scanning path. In this paper, a scanning path generation algorithm that uses 3D CAD data and considers the photopolymer solidification phenomena is proposed to improve the dimensional accuracy in micro-stereolithography. Multi-line photopolymer solidification experiments were performed for various laser scanning conditions to examine the photopolymer solidification phenomena. From these experiments, linear relations between the solidification length (width) and scanning length (width) were acquired and stored in a database. Subsequently, these data were utilized to compensate the scanning path of the laser beam. In addition, experiments for determining the layer thickness in the z-direction were performed and these results were also used in the scanning path generation algorithm.This research was supported by the Highly Advanced National Project (http://www.most.go.kr), which performs some of the National R&D Program, and sponsored by the Korean Ministry of Science and Technology under the contract project code M10214000116-02B1500-02010.     

The impact of agricultural management practices on nutrient losses to water: data on the effects of soil drainage characteristics.

Against the background of increasing nutrient concentrations in Irish water bodies, this study set out to gain information on the potential of agricultural grassland to lose nutrients to water. Overland flow, flow from artificial subsurface drains and stream flow were gauged and sampled during heavy rainfall events. Dissolved reactive phosphorus (DRP), potassium (K), total ammonia (TA), and total oxidised nitrogen (TON) were measured in water samples. When the nutrient concentrations in water were examined in relation to the grassland management practices of the study catchments it emerged that soil P levels, the application of organic and inorganic fertilisers before heavy rainfall and the presence of grazing animals could all influence nutrient concentrations in surface and subsurface drainage water. Overall, the drainage characteristics of soil were found to have a considerable influence on the potential of land to lose nutrients to water.     

Investigation of texture effect on visual colour difference evaluation

The texture effect on visual colour difference evaluation was investigated in this study. Five colour centers were selected and textured colour pairs were generated using scanned textile woven fabrics and colour‐mapping technique. The textured and solid colour pairs were then displayed on a characterized cathode ray tube (CRT) monitor for colour difference evaluation. The colour difference values for the pairs with texture patterns are equal to 5.0 CIELAB units in lightness direction. The texture level was represented by the half‐width of histogram, which is called texture strength in this study. High correlation was found between texture strength and visual colour difference for textured colour pairs, which indicates that an increasing of 10 units of texture strength in luminance would cause a decreasing of 0.25 units visual difference for the five colour centers. The ratio of visual difference between textured and solid colour pairs also indicates a high parametric effect of texture. © 2005 Wiley Periodicals, Inc. Col Res Appl, 30, 341–347, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.