Hybrid sol–gel coatings for corrosion protection of galvanized steel in simulated concrete pore solution

The aim of this experimental research was to study the electrochemical behavior of organic–inorganic hybrid (OIH) coatings for corrosion protection of hot-dip galvanized steel (HDGS) in the first instants of immersion in simulated concrete pore solution (SCPS) (pH > 12.5). The electrochemical performance of the OIH coatings was assessed by electrochemical impedance spectroscopy, potentiodynamic polarization curves, macrocell current density, and polarization resistance. The OIH coatings were prepared via the sol–gel method and were deposited on HDGS surfaces by dip-coating using one or three dip steps. The electrochemical results obtained for HDGS samples coated with OIH matrices in SCPS showed higher corrosion resistance than bare HDGS; as the molecular weight (MW) of Jeffamine^® increased the barrier protection of the coating decreased. The lowest protection efficiency was found for HDGS samples synthesized with oligopolymers with an MW of 2000. Coatings produced with an oligopolymer of 230 MW conferred the highest protection. The surface morphology of the OIH coatings deposited on HDGS surfaces was studied by atomic force microscopy. The results show that the roughness of the OIH films depends on the MW of Jeffamine^® and on the number of dip-coating steps used. Thermogravimetry results show that the Jeffamine^® MW affected the thermal properties of the prepared OIH samples. The prepared OIH materials are thermally stable within the range of 20–80°C.     

Study of the Effects of LAS and Zein Concentrations on Protein Solubilization

The effects of both linear alkylbenzene sulfonate (LAS) and zein protein concentrations on protein solubilization were investigated to better understand the influence of increasing concentration of the surfactant on protein denaturation and skin irritation. Different methods have been used for the determination of the amount of protein dissolved. A wide range of LAS concentrations and zein amounts were used. The results confirm that protein solubilization increases with LAS concentration increase and demonstrate that a minimum LAS/Zein ratio exists for all the zein to be dissolved.     

Voltammetric sensing of tryptophan in dark chocolate bars,skimmed milk and urine samples in the presence of dopamine and caffeine

Journal of Applied Electrochemistry - The present work reports the development of screen-printed electrode (SPE) using flexible polyester sheets modified with nanodiamond (ND), Au nanoparticles...     

Accurate and reliable image classification by using conformal predictors in the TJ-II Thomson scattering

The charge-coupled device camera of the TJ-II Thomson scattering (TS) can capture five different classes of images. Typically, different data processing is performed depending on the kind of image that is acquired. The procedure can be automated to recognize the type of image. To this end, machine learning methods (MLM) are applied. However, usually, MLM classify without confidence estimates. An image classifier based on conformal predictors has been developed for the TJ-II TS. It provides a couple of indicators (confidence and credibility) for each classification that measures the accuracy and reliability of the prediction. Results achieve success rates of about 97%. The implemented classifier is valid for any kind of images.     

Determination of the optical depth of a DI diesel spray

The optical depth is responsible of limiting the optical diagnostic using visible wavelength in the sprays. This paper proposes to measure the optical depth directly in a real Diesel spray through line-of-sight laser extinction measurements. This easily reproducible method which does not require expensive or complex optical techniques is detailed and the measurement procedure is presented in this paper. As diesel sprays are mostly optically thick, the measurements in the denser region are not reliable and a fuel concentration model has been used to derive the results to the entire spray. This work provides values of SMD at different distance from the nozzle tip depending on the specific parameters like injection pressure or discharge density. The values extracted from a combined experimental/computational approach have been compared to PDPA measurements under the same testing conditions. The results have shown that the maximum optical depth was higher than 10 and that an increase of the injection pressure led to higher τ values. The SMD values appeared to be below the results measured by the PDPA and the droplet diameter showed to be the main responsible of the optical depth of the jet under the tested conditions.     

Technological and organizational change in the Brazilian computer industry: A case study

Abstract

This article gives an account of the results of a case study undertaken at a pioneer and particularly prominent firm in the Brazilian computer industry: COBRA — Computadores e Sistemas Brasileiros SA.

The study is part of a research project¹ whose main goal is the identification of viable organizational and technological options that could enhance the performance of firms in the Brazilian electro‐electronics industry. Among the more important findings, it was observed that the firm has the potential to evolve to a more flexible structure, in keeping with the new requirements of the probable future market scenarios within its sector.

Everything indicated, however, that the main constraining factors for bringing about such a structure were connected with the firm's culture and beliefs and with the indirect influence of the National Policy of Information Technology upon these. An hypothesis was put forward for an organizational model, and the necessary supportive computerized technology, which could be particularly appropriate in view of the impending deregulation, of the Brazilian computer industry. Also, in the scope of the current discussion on the restructuring of this industry in terms of a greater concentration, an alternative to the prevailing school of thought was proposed, and for whose success the organizational model at issue purports to be particularly relevant.     

A Nondestructive Methodology for the Study of Colored Enamels: Insights into Manufacturing and Weathering Processes

We studied ancient enamels on gilded copper from a collection of archeological horse harness pendants of the Museo Instituto Valencia de Don Juan (Madrid, Spain) to test the benefits of a new, nondestructive analytical methodology based on chemometric analysis (i.e., Principal Component Analysis, PCA) on micro‐ATR‐FTIR spectral data and chemical quantification using SEM‐EDS. The novelty of this approach was threefold: (i) PCA allowed the discrimination of the different harness pendants of known origin and attributed to the 14th and 15th centuries according to the chemical complex composition, nanostructure, glass weathering, and/or coloring mechanisms of each colored enamel, separately (i.e., red, purple, blue, and white), (ii) it is a cheap, easily available and nondestructive methodology that enables us to (iii) draw archeological conclusions about the quality of the manufacturing process, reassess the chronology of these objects and attempt to attribute them to different workshops according to the different traditional recipes identified. In particular, the enamels were made of alkali and/or alkaline earth lead‐glass with a wide range of chemical compounds in the form of pigments or opacifiers. Two types of coloring mechanisms were identified, colloidal particles such as copper‐ruby for red enamels, and ionic mechanisms such as Fe(II) and Co(II) to achieve a blue pigments; Mn(III) in the purple pigment; and two kind of white enamels were identified, i.e., tin oxide as an opacifier and uranium oxide. In addition, we established the reason for the poor state of conservation of some of the enamels by means of the identification of depolymerization and ion exchanges, well‐known harmful effects of glass weathering, and finally a chronology was assigned for some of these pieces according to the enamel composition.     

去除废水中顽固污染物:染料废水脱色和生物降解的联合处理过程(英文)

While conventional wastewater treatments for urban effluents are fairly routine and have proved highly effective,industrial wastewater requires more complex and specific treatments.This paper provides a technological strategy for removal of recalcitrant contaminants based on a hybrid treatment system.The model effluent containing a binary mixture of synthetic dyes is treated by a combination of a preliminary physicochemical stage followed by a biological stage based on ligninolytic enzymes produced by Phanerochaete chrysosporium.This proposal includes biosorption onto peat as pretreatment,which decreases the volume and concentration to be treated in the biological reactor,thereby obtaining a completely decolorized effluent.The treated wastewater can therefore be reused in the dyeing baths with the consequent saving of water resources.     

Evaluation of Alternative Preservation Treatments (Water Heat Treatment,Ultrasounds, Thermosonication and UV-C Radiation) to Improve Safety and Quality of Whole Tomato

Previously optimised postharvest treatments were compared to conventional chlorinated water treatment in terms of their effects on the overall quality of tomato (‘Zinac’) during storage at 10 °C. The treatments in question were water heat treatment (WHT?=?40 °C, 30 min), ultrasounds (US?=?45 kHz, 80 %, 30 min), thermosonication (TS?=?40 °C, 30 min, 45 kHz, 80 %) and ultraviolet irradiation (UV-C: 0.97 kJ m^?2). The quality factors evaluated were colour, texture, sensorial analysis, mass loss, antioxidant capacity, total phenolic content, peroxidase and pectin methylesterase enzymatic activities, and microbial load reduction. The results demonstrate that all treatments tested preserve tomato quality to some extent during storage at 10 °C. WHT, TS and UV-C proved to be more efficient on minimising colour and texture changes with the additional advantage of microbial load reduction, leading to a shelf life extension when compared to control trials. However, at the end of storage, with exception of WHT samples, the antioxidant activity and phenolic content of treated samples was lower than for control samples. Moreover, sensorial results were well correlated with instrumental colour experimental data. This study presents alternative postharvest technologies that improve tomato (Zinac) quality during shelf life period and minimise the negative impact of conventional chlorinated water on human safety, health and environment.