Fragility curve probabilistic model applied to durability and long term mechanical damage of masonry

In view of preserving the historical heritage, the deterioration processes of masonry materials and the long term damage of multiple leaf historic buildings is studied from an experimental and a numerical point of view. Durability tests and pseudo-creep tests have been carried out and interpreted through probabilistic models for the service life prediction. The precocious recognition of structural critical states will allow to design repair and strengthening interventions and to prevent total or partial failure of the constructions.     

Botanical features for identification of Gymnosporia arenicola dried leaf

Gymnosporia arenicola Jordaan (Celastraceae) is a shrub or small tree, which naturally occurs in coastal sand dunes of Southern Mozambique and South Africa. Its dried leaf is often used in traditional medicine for the treatment of infectious and inflammatory diseases. Hereby, we present results of studies carried out according to the pharmacopoeia standards for the identification of herbal drugs, in the whole, fragmented, and powdered plant material. These results were complemented with scanning electron microscopy and histochemical techniques. The leaf microscopic analysis revealed a typical dorsiventral mesophyll with a corresponding spongy parenchyma–palisade parenchyma ratio of 0.60, anomocytic and paracytic stomata, papillate cells with a diameter of 4.00 ± 0.40 µm, multicellular uniseriate nonglandular trichomes with a length of 27.00 ± 4.10 µm and cristalliferous idioblasts containing calcium oxalate cluster crystals with a diameter of 23.04 ± 5.84 µm. The present findings demonstrate that the G. arenicola leaf has both nonglandular trichomes and hypoderm, features not previously described in the corresponding botanical section (Gymnosporia sect. Buxifoliae Jordaan). The establishment of these new botanical markers for the identification of G. arenicola leaf is essential for quality, safety and efficacy reasons. Microsc. Res. Tech. 78:1001–1009, 2015. © 2015 Wiley Periodicals, Inc.     

Pile burning of cutting debris in stands of hazel (Corylus avellana): An experimental study of smouldering combustion towards the validation of a burning protocol

Smouldering combustion in burning piles was experimentally investigated by studying temperature changes in six piles of 2 m of diameter of cutting debris of hazel (Corylus avellana) for three days after extinction. The piles were monitored using an IR camera and K-type thermocouples. The experiment was designed in order to study how the maximum temperature of the charcoal might be influenced by the individual and interaction effects of both the quality of extinction and the elapsed time until the start of extinction of the piles. The piles that were properly extinguished (i.e. using a high-pressure, homogeneously distributed water flow of 50 l/min for 4 min) had a uniform temperature profile and did not have significant hot spots. The temperature reached equilibrium with the environment in less than 10 h after extinction. In contrast, a smouldering front moved throughout the poorly extinguished piles, which had a wide temperature distribution and hot spots of up to 700 °C. A simulation of windy conditions after three days of experiments on a poorly extinguished pile showed that the reactivation of charcoal combustion was possible. It gave a high-risk scenario to cause a wildfire, with hot smouldering embers being transported by wind flow. The results are of interest to improve pile burning protocols so that the number of wildfires caused by such practices may be reduced.     

Soil degradation in the tropical forests of the Dominican Republic's Pedernales province in relation to heavy metal contents

Two of the National Parks of the only Biosphere Reserve in the Caribbean Islands, the Jaragua-Bahoruco-Enriquillo reserve, occur mostly within the Pedernales province (Dominican Republic). In these National Parks, Jaragua and Bahoruco, almost every tropical forest ecosystem is represented, as are the land uses most common to the Dominican Republic. Despite soil being a key natural resource that needs to be considered in any sustainable development programme, the literature contains very little information on the soils of this region. In this study, we analysed 41 topsoil samples representing the main forest types and land uses of the province. The factors examined were fertility (OM, N, P, K) and heavy metal contents (Cu, Cr, Pb, Cd, Ni, Zn). Mean OM, N and total and available metal levels were almost invariably higher in the natural forest soils compared to those given over to human activities, especially cultivated soils. This difference suggests the uptake of metals by the crops and, to a lesser extent, by animals feeding on crop remains and grassland plants. This hypothesis is supported by high total and available metal contents, especially of Zn, Cu, Pb and, in smaller measure, of Cr recorded in the solid waste landfill of the city of Pedernales. It appears that the cutting down and burning practices of a nomad type of cultivation, as well as the pressures of intensive agriculture and livestock rearing have resulted in heavy metals bound to the soil's OM. We propose this is an important point to consider for the management of these lands.     

Effects of two chelating agents (EDTA and DTPA) on the autochthonous vegetation of a soil polluted with Cu, Zn and Cd

Chelating agents are thought to be useful for the remediation of metal-polluted soils with adequate organic matter, but the effects of these substances on the plants or seed bank of plant communities that occur in the soils are relatively unknown. In this work, the effects of two chelating substances (EDTA and DTPA) on a wet grassland plant community affected by the presence of the abandoned copper mine "Fernandito" (Garganta de los Montes, Madrid) were compared. A microcosm bioassay (6 months) was designed using the soil's top layer containing the grassland's seed bank. This soil showed a high Cu pollution level, significant contents of Zn and Cd (1120, 190, and 15 ppm, respectively), a pH of 5 and an OM content of 6.2%. The soil was subjected to three different treatments: a) untreated soil (control), b) the addition of 1 g/kg EDTA, or of c) 1 g/kg DTPA. The results presented here are those related to the plant cover, species richness, aboveground and subterranean biomass and chemical composition of the most abundant plants. Neither EDTA nor DTPA caused intense negative effects on the plants rather they significantly increased the amount of copper accumulated in aboveground parts and roots. In particular, Agrostis castellana and Corrigiola telephiifolia extracted high amounts of copper when grown in the soil with added EDTA, although they showed some nutritional imbalances (lower P contents). In contrast, lower metal concentrations were detected in plants grown in the DTPA amended soil.     

Toward sustainable material usage: evaluating the importance of market motivated agency in modeling material flows

Increasing recycling will be a key strategy for moving toward sustainable materials usage. There are many barriers to increasing recycling, including quality issues in the scrap stream. Repeated recycling can compound this problem through the accumulation of tramp elements over time. This paper explores the importance of capturing recycler decision-making in accurately modeling accumulation and the value of technologies intended to mitigate it. A method was developed combining dynamic material flow analysis with allocation of those materials into production portfolios using blending models. Using this methodology, three scrap allocation methods were explored in the context of a case study of aluminum use: scrap pooling, pseudoclosed loop, and market-based. Results from this case analysis suggest that market-driven decisions and upgrading technologies can partially mitigate the negative impact of accumulation on scrap utilization, thereby increasing scrap use and reducing greenhouse gas emissions. A market-based allocation method for modeling material flows suggests a higher value for upgrading strategies compared to a pseudoclosed loop or pooling allocation method for the scenarios explored.     

The metabolism and analysis of isoflavones and other dietary polyphenols in foods and biological systems

Polyphenols in dietary and botanical matrices are usually present as simple and complex O-glycosides. In fermented dietary materials, the glycosidic moiety is removed and accompanied in some cases by more complex changes to the polyphenol. As for most xenobiotics, polyphenols undergo phase II conjugation in the intestinal wall during their absorption from the gut. In contrast, a few polyphenols, such as puerarin in the kudzu vine, are C-glycosides and are stable in the gut and during absorption, distribution and excretion. Large bowel bacteria reduce polyphenol aglycones, causing opening of the heterocyclic B-ring and ring cleavage. The products are mostly absorbed and enter the bloodstream. Phase I and II metabolism events occur in the intestine and the liver - most polyphenols predominantly circulate as β-glucuronides and sulfate esters with very little as the aglycones, the presumed active forms. In addition, metabolism can occur in non-hepatic tissues and cells including breast tumor cells that have variable amounts of cytochrome P450s, sulfatase and sulfotransferase activities. Inflammatory cells produce chemical oxidants (HOCl, HOBr, ONO(2)(-)) that will react with polyphenols. The isoflavones daidzein and genistein and the flavonol quercetin form mono- and dichlorinated products in reaction with HOCl. Genistein is converted to 3'-nitrogenistein in the lung tissue of lipopolysaccharide-treated rats. Whereas polyphenols that can be converted to quinones or epoxides react with glutathione (GSH) to form adducts, chlorinated isoflavones do not react with GSH; instead, they are converted to β-glucuronides and are excreted in bile. Analysis of polyphenols and their metabolites is routinely carried out with great sensitivity, specificity and quantification by LC-tandem mass spectrometry. Critical questions about the absorption and tissue uptake of complex polyphenols such as the proanthocyanins can be answered by labeling these polyphenols with (14)C-sucrose in plant cell culture and then purifying them for use in animal experiments. The (14)C signature is quantified using accelerator mass spectrometry, a technique capable of detecting one (14)C atom in 10(15) carbon atoms. This permits the study of the penetration of the polyphenols into the interstitial fluid, the fluid that is actually in contact with non-vascular cells.     

Effect of dysprosia doping on structural and electrical property of stabilized zirconia for intermediate- temperature SOFCs

Present work deals with structural, micro-structural and electrical properties of dysprosia stabilized zirconia electrolyte, which have been evaluated by means of X-ray diffraction (XRD) and scanning (SEM), and complex impedance analysis respectively. The amount of dysprosia was varied from 2 to 12 mol% in zirconia. The addition of dysprosia (8-12 mol%) stabilized the cubic zirconia phase, which was analyzed from XRD analysis. SEM micrographs clearly showed the improvement in sinterability with increase in dysprosia concentration up to 6 mol% disprosia. Complex impedance analysis was performed in the temperature range from 250 to 600 °C. The results indicated a gradual decrease in impedance of both bulk and grain boundary and increase in conductivity with dysprosia doping up to 6 mol% and thereafter showing a reverse trend. The activation energies for oxygen ion migration were also found to decrease with increase in dysprosia doping which was in the range of 0.99 ? 1.28 eV. The average thermal expansion coefficient increases linearly.     

Experimental study of the emissivity of flames resulting from the combustion of forest fuels

Heat transfer by radiation is taken into account in most models that predict the propagation of forest fires. This heat transfer mechanism is normally formulated according to the Stefan–Boltzmann law in terms of flame temperature and flame emissivity. This study focused on flame emissivity. Experimental studies carried out to compute the emissivity of the flames generated during the combustion of forest fuels were reviewed, thereby highlighting differences in methodologies and results. Since the results of these studies with regard to the exponential relationship between flame emissivity and flame thickness were not in agreement, two methods based on IR imagery were used in the present study to calculate flame emissivity values. Nine circular fuel beds with a diameter of 0.3–2.5 m were prepared with common Mediterranean species and burned as stationary fires. An exponential correlation between flame emissivity and flame thickness was observed for both methods. According to the results of this study, only flames thicker than 3.2 m would exhibit an emissivity close to that of a blackbody (0.9), and the associated extinction coefficient would be 0.72. A long-term retardant product was used to treat the fuel of two of the nine tests that were carried out and no effect on flame emissivity was observed.     

Seed oils of ten traditional Portuguese grape varieties with interesting chemical and antioxidant properties

To increase the potential and better exploring of grape seeds that are an important wine-industrial waste, oils of ten traditional Portuguese grape varieties were evaluated in relation to their vitamin E content (tocopherols and tocotrienols), fatty acid profile, as well as, antioxidant properties. Our results showed that the grape-seed oils were a good source of γ-tocotrienol (499–1575 mg/kg), α-tocopherol (85.5–244 mg/kg) and α-tocotrienol (69–319 mg/kg). Concerning fatty acid profile, linoleic (C18:2cc), oleic (C18:1), palmitic (C16:0) and stearic (C18:0) acids were the predominant. Grape-seed oils demonstrated to be a good source of polyunsaturated fatty acids (PUFAs) (63.64–73.53%), whereas monounsaturated fatty acid (MUFA) and saturated fatty acid (SFA) ranged between 14.19–21.29% and 11.64–14.94%, respectively. Interesting values of DPPH and ABTS radical scavenging activities were also obtained. This study demonstrated that these seeds may be reused and their oils incorporated in other food products, taking into account the compounds with positive effects on human health that are present in their composition.