Thermal Stability of KU-2*8 Sulfocation Exchanger in Contact with Nitric Acid under Isochoric Conditions

Protection of Metals and Physical Chemistry of Surfaces - The thermal stability of KU-2*8 cation exchanger mixed with 4 and 12 mol/L nitric acids is studied via differential scanning calorimetry...     

Mechanical,chemical, thermal,and rheological properties of recycled PA6/ABS binary and PA6/PA66/ABS ternary blends

The effects of multiple injection molding cycles on the chemical and mechanical properties of PA6/ABS and PA6/PA66/ABS blends are investigated. The chemical structures of both PA6/ABS binary and PA6/PA66/ABS ternary blends do not alter after recycling process. For PA6/ABS binary blend, it is found that the tensile strength, strain at break, elastic modulus, impact strength, flexural strength, and modulus of recycled blend decrease by 6.49%, 15.19%, 21.00%, 9.41%, 7.09%, and 8.25%, respectively, while MFI increases by 23.59% as compared with the virgin blend. After five recycling process for PA6/PA66/ABS ternary blend, the tensile strength, strain at break, and impact strength of recycled blend decrease by 18.00%, 50.80%, and 87.27%, respectively. However, flexural strength and modulus of PA6/PA66/ABS blend increase slightly. For virgin PA6/PA66/ABS blend, MFI value was 7.7 g/10 min and with recycling this value showed an important increase to 31.56 g/10 min after five cycles. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40810.     

Preparation of hybrid PU/PCL fibers from steviol glycosides via electrospinning as a potential wound dressing materials

In this study, the synthesis and application of biocompatible steviol glycosides based polyurethane/poly (ε-caprolactone) (PU/PCL) fibers was performed by electrospinning as a potential wound dressing materials that can be used for the closure of nonhealing wounds. During electrospinning, steviol glycoside-based polyurethane structures were used in blend formation with poly (ε-caprolactone) for easy producibility. Steviol glycosides are a natural abundant and easily accessible source as the main component of the wound dressing material due to their free hydroxyl groups, high biocompatibility, and hydrophilicity. The structure of steviol glycosides is composed of saccharide units and the free OH groups. Thus, steviol glycosides act as a crosslinker within the polyurethane structure and provides mechanical strength. For the production of steviol glycosides based PU/PCL fibers first, the steviol glycosides as a monomer were isolated from the stevia rebudiana. Then, polyurethane structures containing stevia glycoside were synthesized with hexamethylene diisocyanate, lactose and PEG-200 by solution polymerization technique. PCL was added to the prepared polyurethanes in a ratio of 1:2 and formation of nanofiber structure. The prepared wound dressing material was characterized by Fourier transform infrared, atomic force microscopy, and scanning electron microscope techniques. Swelling degree, water content and oxygen permeability assay of the steviol glycosides based PU/PCL wound dressing material was determined. In biocompatibility test, cell viability value of PU/PCL fibrous materials in indirect cytotoxicity test was determined as 86.9% and cell adhesion on hybrid PU/PCL fibers was showed as morphological. In accordance with this target, the steviol glycosides based PU/PCL wound dressing material can be produced easily and low cost. As a result, the wound dressing materials obtained with their high biocompatibility and low costs will be an effective and fast method for the healing of open wounds of diabetics.     

The detection of a strong influence of composition variations on low-temperature magnetic ordering in nearly stoichiometric Fe–V–Al alloys

The magnetic state of Fe–V–Al alloys with nearly stoichiometric (Fe₂VAl) compositions varying with respect both to aluminum and transition elements was studied. The effect of strong qualitative change in the magnetic properties induced by small variations of the composition was observed for the first time and analyzed. The key result is the detection of ferromagnetic ordering with a relatively high (~50 K) Curie temperature in an alloy with V atoms substituted in the lattice by Al atoms and the Fe content corresponding to the stoichiometric composition.     

Designing a heat-exchange system upon the reconstruction and synthesis of optimal systems of distillation columns

The approach to the problem of designing optimal heat-exchange networks for the reconstruction and synthesis of distillation columns is discussed. It has been proposed to reduce the original discrete-continuous nonlinear programming problem to the modified linear programming assignment problem that takes into account a number of features of separation systems.     

Predicting construction crew productivity by using Self Organizing Maps

A Self Organizing Map (SOM), is a machine learning method that represents high-dimensional data in low-dimensional form without losing topological relations of the data. After an unsupervised learning process, it organizes the data on the basis on similarity. In the current study, a SOM based algorithm has been developed which not only produces 2-D maps to analyze the relationship between various factors and crew productivity, but also predicts productivity under given conditions. Validation of the model has been achieved both by using artificial data set and data from 144 concrete pouring, 101 formwork and 101 reinforcement crews. The results show that maps which are produced by the model are satisfactory in clustering the data and prediction performance of the model is superior to similar artificial neural network models.     

Diffusional Boriding of Subeutectoidal Tool Steels: Technology and Outcome

Structural, subeutectoidal structural, and tool steels are studied. Their boriding is considered. Equipment for electrolytic boriding and a modernized high-temperature casting crucible are presented. The conditions of electrolytic boriding are established. Shortcomings of electrolytic boriding are noted.