Determination of bioclimatic comfort in three different land uses in the city of Erzurum,Turkey

This study was carried out to determine the human bioclimatic conditions in rural, urban and urban forest areas in the conditions of the city of Erzurum, where an extreme continental climate type prevails. Data were obtained over a 10-month period and human bioclimatic conditions in these three different land-use types were evaluated using human bioclimatic indices, suitable for the data obtained. In the study, thermohygrometric index (THI), which assesses air temperature and relative humidity, and “beer garden days” index, which uses the days when temperature at 21:00 is over 20 °C, were used. While in these three areas “hot” and “comfort” ranges were determined to be 10% of the period, the number of “beer garden” days was only 20 days in rural, 15 days in urban forest and 18 days in urban areas of Erzurum. Consequently, it has been determined that the most suitable area for the human comfort in the conditions of Erzurum is in the urban area which is followed by the urban forest and the rural areas, both for each observation time and across the whole period.     

Erbium(III)‐doped polyurethaneureas: Novel broadband ultraviolet‐to‐visible converters

Novel, polymeric UV‐to‐visible converters were prepared by doping elastomeric poly(ether‐urethaneurea) copolymers with 5–25% by weight of ErCl₃ 6H₂O, corresponding to Er³⁺ concentrations of 2.19 to 10.86% by weight. When excited in the UV at 355 nm, the doped films generated a very broad, continuous visible luminescence between 400 and 750 nm. Preparation and spectroscopic characterization of the samples are discussed in detail. The color coordinates, color temperature, color rendering index of the samples, and the degree of overlap of their emission bands with the spectral response of the eye were determined. The color rendering index of samples is in the 57–70 range. The sample containing 2.19% by weight of Er³⁺ was found to give the color coordinates closest to the white‐source region and the highest color rendering index. The color temperatures of the samples were in the 5093–5540 K range. Overlap between the emission bands and the spectral response of the eye improved with increasing erbium concentration. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

The effect of recycling number on the mechanical,chemical, thermal,and rheological properties of PBT/PC/ABS ternary blends: With and without glass‐fiber

The recycling possibilities of poly(butylene terephthalate)/polycarbonate/acrylonitrile–butadiene–styrene (PBT/PC/ABS) ternary blend with and without glass‐fiber content were investigated using repeated injection molding process. In this study, PBT/PC/ABS ternary blends were reprocessed at five times and the results were presented after each recycling process. The recycling possibility of PBT/PC/ABS ternary blend was evaluated by measuring the mechanical, chemical, thermal, and rheological properties. Mechanical properties were determined by the tensile strength, yield strength, strain at break, elastic modulus, impact strength, flexural strength, and flexural modulus. Chemical and thermal properties were evaluated by Fourier transform infrared spectroscopy, differential scanning calorimetry, thermal gravimetric analysis, and scanning electron microscopy. Rheological properties of the ternary blends were studied by melt flow index measurement. From the results, it was found that mechanical properties of recycled composites were better than virgin PBT/PC/ABS ternary blends. POLYM. COMPOS., 35:2074–2084, 2014. © 2014 Society of Plastics Engineers     

Micro‐ and nanoscale structures of mesiodens dentin: Combined study of FTIR and SAXS/WAXS techniques

A mesiodens is the most common type of supernumerary tooth present in conjunction to normal dentition. A mesiodens may commonly occur in the central region of the upper or lower jaw. A mesiodens is different from normal teeth in terms of structure and shape. The aim of this study is to evaluate the micro‐ and nanoscale structural properties of mesiodens dentin by combined small‐ and wide‐angle X‐ray scattering (SAXS/WAXS) and Fourier transform infrared (FTIR) spectroscopy. Five freshly extracted, noncarious mesiodens and five normal dentin disks prepared from human incisor teeth were compared. Using FTIR, the phosphate‐to‐amide I, carbonate‐to‐phosphate, and carbonate‐to‐amide I band area ratios and the crystallinity index were quantified. SAXS/WAXS were used to study the nanostructure of mesiodens. An increase in the mineral content in the mesiodens dentin with respect to the normal group was found. Crystallinity was also significantly increased and the protein content decreased in the mesiodens dentin compared with that of normal dentin. SAXS/WAXS results revealed that mesiodens dentin has a more calcified tissue. Further, SAXS analysis revealed a nonuniform distribution of dentin fibrils in mesiodens. Microsc. Res. Tech., 78:52–58, 2015. © 2014 Wiley Periodicals, Inc.     

Susceptor-assisted fast microwave sintering of TiN reinforced SiAlON composites in a single mode cavity

In the present study, 17 wt % TiN reinforced α-β SiAlON composites were sintered at low temperature by susceptor-assisted microwave heating. The effect of TiN addition on dielectrical properties of starting powders, as well as the influence of sintering temperature on phase evolution, microstructure development and mechanical properties of α/β-SiAlON-TiN composites were investigated. The obtained results showed that TiN addition increased the microwave absorbing properties which is reflected in the peak sintering temperature. Thus, the α:β ratio decreased and mechanical properties were improved, especially the fracture toughness of the composites. Furthermore, an estimate of energy consumption during microwave assisted sintering at the laboratory scale is presented. As a result, the highest values for relative density (97.1%), Vickers hardness (13.35 ± 0.47 GPa), and fracture toughness (7.52 ± 0.54 MPa m^1/2) were obtained by microwave sintering for 30 min at 1300 °C.     

Aloe vera-based antibacterial porous sponges for wound dressing applications

Journal of Porous Materials - The antibacterial sponges with high macroporosity, high interconnectivity and high biocompatibility is a significant concern for wound healing applications. In this...     

Creating a high-quality wool-oriented Turkish merino herd and investigation of mechanical and dyeability properties of fabrics produced from Turkish merino in comparison with Australian merino

Today, the need for quality wool suitable for worsted fabric production in the world is mainly met by Australian merino wool. In Turkey, which has a significant sheep population, in addition to domestic breeds, approximately 10% of the total sheep population (around four million head) is composed of merino cross breeds. However, the fleece quality is far from meeting Australian merino wool standards. Therefore, the aim of this study is to ensure a merino herd with high-quality wool in Turkey. For this aim, by carrying out field studies in the Thrace region of Turkey where Turkish Merino sheep are widely bred, sheep with fleece that can meet the demands of the worsted industry were determined. As a result of field studies in which thousands of sheep were examined, it was determined that 43 female and 10 male sheep had fleece that would meet these standards. Then the breeders of the sheep, which had quality fleece, were persuaded and these sheep were purchased, and “Turkey's wool-oriented Turkish (Karacabey) Merino Herd” consisting of 30 sheep and three rams was formed in the farm of Tekirdağ Namık Kemal University. In the second part of this study, a 100% wool fabric produced by using Australian merino was taken as a reference and it was aimed to produce the same fabric from Turkish merino wool. For this aim, the wool-oriented Turkish Merino herd, which was bred at the university farm for 1 year, was shorn in May 2022. Then, Turkish and Australian merino wools were first converted into worsted yarn and then into woven fabric. The results of mechanical (tensile strength, pilling, abrasion resistance, felting shrinkage, Hofmann dimensional change, bending stiffness) and dyeability (dye-uptake, CIE L*a*b* and colour yield (K/S) values; washing, rubbing and light fastness values) properties of fabrics produced from Turkish and Australian merino wool is presented.     

Exploring factors affecting consumers' adoption of wearable devices to track health data

Universal Access in the Information Society - Mobile health is a rapidly emerging topic due to technological advances, especially in mobile computing and communication technologies. Increased...     

Fixed-Bed Pyrolysis of Hazelnut (Corylus Avellana L.) Bagasse: Influence of Pyrolysis Parameters on Product Yields

Fixed-bed slow pyrolysis experiments have been conducted on a sample of hazelnut bagasse to determine particularly the effects of pyrolysis temperature, heating rate, particle size and sweep gas flow rate on the pyrolysis product yields. The temperature of pyrolysis, heating rate, particle size and sweep gas flow rate were varied in the ranges 350–550° C, 10 and 50° C/min, 0.224–1.800 mm and 50–200 cm³/min, respectively. Under the various pyrolysis conditions applied in the experimental studies, the obtained char, liquid, and gas yield values ranged between 26 and 35 wt%, 23 and 34.40 wt%, and 25 and 32 wt%, respectively. The maximum biooil yield of 34.40% was obtained at the final pyrolysis temperature of 500°C, with a heating rate of 10° C/min, particle size range of 0.425–0.600 mm and a sweep gas flow rate of 150 cm³/min.