Molecular Targeted Therapy for the Bone Loss Secondary to Pyogenic Spondylodiscitis Using Medications for Osteoporosis: A Literature Review

Pyogenic spondylodiscitis can cause severe osteolytic and destructive lesions in the spine. Elderly or immunocompromised individuals are particularly susceptible to infectious diseases; specifically, infections in the spine can impair the ability of the spine to support the trunk, causing patients to be bedridden, which can also severely affect the physical condition of patients. Although treatments for osteoporosis have been well studied, treatments for bone loss secondary to infection remain to be elucidated because they have pathological manifestations that are similar to but distinct from those of osteoporosis. Recently, we encountered a patient with severely osteolytic pyogenic spondylodiscitis who was treated with romosozumab and exhibited enhanced bone formation. Romosozumab stimulated canonical Wnt/β-catenin signaling, causing robust bone formation and the inhibition of bone resorption, which exceeded the bone loss secondary to infection. Bone loss due to infections involves the suppression of osteoblastogenesis by osteoblast apoptosis, which is induced by the nuclear factor-κB and mitogen-activated protein kinase pathways, and osteoclastogenesis with the receptor activator of the nuclear factor-κB ligand-receptor combination and subsequent activation of the nuclear factor of activated T cells cytoplasmic 1 and c-Fos. In this study, we review and discuss the molecular mechanisms of bone loss secondary to infection and analyze the efficacy of the medications for osteoporosis, focusing on romosozumab, teriparatide, denosumab, and bisphosphonates, in treating this pathological condition.     

Diffusion Magnetic Resonance Imaging-Based Biomarkers for Neurodegenerative Diseases

There has been an increasing prevalence of neurodegenerative diseases with the rapid increase in aging societies worldwide. Biomarkers that can be used to detect pathological changes before the development of severe neuronal loss and consequently facilitate early intervention with disease-modifying therapeutic modalities are therefore urgently needed. Diffusion magnetic resonance imaging (MRI) is a promising tool that can be used to infer microstructural characteristics of the brain, such as microstructural integrity and complexity, as well as axonal density, order, and myelination, through the utilization of water molecules that are diffused within the tissue, with displacement at the micron scale. Diffusion tensor imaging is the most commonly used diffusion MRI technique to assess the pathophysiology of neurodegenerative diseases. However, diffusion tensor imaging has several limitations, and new technologies, including neurite orientation dispersion and density imaging, diffusion kurtosis imaging, and free-water imaging, have been recently developed as approaches to overcome these constraints. This review provides an overview of these technologies and their potential as biomarkers for the early diagnosis and disease progression of major neurodegenerative diseases.     

Critical Deposition Condition of CoNiCrAlY Cold Spray Based on Particle Deformation Behavior

Previous research has demonstrated deposition of MCrAlY coating via the cold spray process; however, the deposition mechanism of cold spraying has not been clearly explained—only empirically described by impact velocity. The purpose of this study was to elucidate the critical deposit condition. Microscale experimental measurements of individual particle deposit dimensions were incorporated with numerical simulation to investigate particle deformation behavior. Dimensional parameters were determined from scanning electron microscopy analysis of focused ion beam-fabricated cross sections of deposited particles to describe the deposition threshold. From Johnson-Cook finite element method simulation results, there is a direct correlation between the dimensional parameters and the impact velocity. Therefore, the critical velocity can describe the deposition threshold. Moreover, the maximum equivalent plastic strain is also strongly dependent on the impact velocity. Thus, the threshold condition required for particle deposition can instead be represented by the equivalent plastic strain of the particle and substrate. For particle-substrate combinations of similar materials, the substrate is more difficult to deform. Thus, this study establishes that the dominant factor of particle deposition in the cold spray process is the maximum equivalent plastic strain of the substrate, which occurs during impact and deformation.     

Application of nuclear energy for environmentally friendly hydrogen generation

It is universally admitted that hydrogen is one of the best energy media and its demand will increase greatly in the near future. However, little hydrogen exists naturally, so that how to generate hydrogen without bringing forth much CO₂${}_2$ will be very important research subject. Hydrogen generation from water using nuclear energy is one of the solutions for this problem. Especially, the high temperature gas cooled reactor (HTGR) has a possibility to generate hydrogen economically compared with other types of nuclear reactors. As for long-lived radioactive waste to be generated by nuclear reactors, it is expected to significantly reduce its burden to the human environment by applying transmutation technologies. This report describes the feature of the hydrogen generation with HTGR and the development of the accelerator-driven subcritical system to reduce radioactive waste ongoing at JAEA.     

A simple screening procedure for heterotrophic nitrifying bacteria with oxygen-tolerant denitrification activity

Various naturally occurring strains of heterotrophic nitrifying bacteria were isolated by enrichment culture using acetamide as the C and N source, and 21 strains were identified as heterotrophic nitrifiers. Using a new simple procedure, these 21 strains were also investigated for the ability to carry out denitrifcation in the presence of oxygen. Several of the nitrifying strains were found to exhibit a distinct activity that allows for denitrifcation via nitrite (NO2-) in the presence of oxygen, indicating that they have an oxygen-tolerant denitrifcation system. A wide variety of bacteria possessing both nitrification and denitrifcation capabilities in the presence of oxygen were isolated and partially characterized by using the simple screening combinatorial procedure described in this paper.     

Newly Developed Thyristor Chopper Equipment for Electric Railcars

In the chopper control system for electric railcars, it is effective to adopt high operational frequency of the chopper for achievement of the following: 1) decrease of higher harmonic current induced in the trolley wire, 2) reduction of weight for reactors and capacitors in the traction circuit, and 3) improvement of control response. Through development of reverse-conducting thyristors with very short turn-off time and a repulsion type two-phase chopper, we finally realized production of a new standard high-frequency chopper equipment with regenerative braking for 1500-V dc railcars. Technical achievements mentioned previously were completely realized as a result of adoption of high frequency, 660 Hz, in the equipment. The newly developed standard high-frequency chopper equipment for 30 cars were delivered to the Chiyoda Line of Teito Rapid Transit Authority in Tokyo, and they have been operated satisfactorily in revenue service since March 1971. This paper also describes: 1) the chopper circuit using fast-switching reverse-conducting thyristors and series saturable reactors, 2) analysis of commutation circuit and methods of suppressing reapplied forward voltage increasing rate (dv/dt) and shortening commutation period, 3) the composition of the traction circuit including the protection system, such as protection for overvoltage at the regenerative braking, and 4) test results on the Chiyoda Line of Teito Rapid Transit Authority.     

Real-Time Amplitude and Phase Imaging of Optically Opaque Objects by Combining Full-Field Off-Axis Terahertz Digital Holography with Angular Spectrum Reconstruction

Terahertz digital holography (THz-DH) has the potential to be used for non-destructive inspection of visibly opaque soft materials due to its good immunity to optical scattering and absorption. Although previous research on full-field off-axis THz-DH has usually been performed using Fresnel diffraction reconstruction, its minimum reconstruction distance occasionally prevents a sample from being placed near a THz imager to increase the signal-to-noise ratio in the hologram. In this article, we apply the angular spectrum method (ASM) for wavefront reconstruction in full-filed off-axis THz-DH because ASM is more accurate at short reconstruction distances. We demonstrate real-time phase imaging of a visibly opaque plastic sample with a phase resolution power of λ/49 at a frame rate of 3.5 Hz in addition to real-time amplitude imaging. We also perform digital focusing of the amplitude image for the same object with a depth selectivity of 447 μm. Furthermore, 3D imaging of visibly opaque silicon objects was achieved with a depth precision of 1.7 μm. The demonstrated results indicate the high potential of the proposed method for in-line or in-process non-destructive inspection of soft materials.     

A novel spherical carbon

We developed a novel spherical carbon material. The spherical carbon is composed of a high density of carbon nanotubes or nanofilaments, and includes an oxidized diamond particle as a core. Syntheses of this carbon in high volume with high selectivity may be possible. It is expected that this carbon will be useful as a catalyst material for fuel cells, electric double-layer capacitors, etc.     

Quantum Transport Simulation of Silicon-Nanowire Transistors Based on Direct Solution Approach of the Wigner Transport Equation

In this paper, we present a self-consistent and 3D quantum simulator for Si-nanowire transistors based on the Wigner function model and multidimensional Schrodinger-Poisson algorithm. To achieve a sufficient numerical accuracy for calculating subthreshold current, we introduced a third-order differencing scheme for discretizing the drift term in the Wigner transport equation. By comparing with semiclassical Boltzmann and nonequilibrium Green's function approaches, the validity of the present simulator is confirmed. We also demonstrate that the source-drain tunneling is a critical physical phenomenon related to a scaling limit of nanowire devices, and the semiclassical simulation measurably underestimates a minimum gate length.     

Investigation of reacting flow fields in miscible viscous fingering by a novel experimental method

The reacting flow fields in reactive miscible viscous fingering in a Hele‐Shaw cell studied by Nagatsu and Ueda had not been completely elucidated, mainly because one cannot exactly recognize where and when the reaction takes place in the reactive fingering pattern. We developed a novel experimental method that allowed us to identify the reaction region in the fingering pattern employed in the previous studies. The novel method involves switching of the less‐viscous liquid injected in both the nonreactive and reactive experiments. By using the novel method, we succeeded in showing how the reaction region in the fingering pattern was affected by the initial reactant concentrations, the Péclet number, and time. We propose physical models of the reacting flow field in the cell's gap direction that can explain the obtained experimental results. © 2009 American Institute of Chemical Engineers AIChE J, 2009