Multicentre evaluation of the Monarch (IL) clinical chemistry analyser

A multicentre evaluation of the Monarch centrifugal analyser is reported. Precision, linearity and accuracy were assessed by comparison with routine methods. Calibration stability, photometric and dispensing accuracy, and carry-over related to samples and reagents were also evaluated. The overall performance of the instrument was good, showing an excellent photometric and dispensing accuracy, absence of sample-dependent carry-over, and almost negligible reagent carry-over. Good precision, linearity and correlation with routine methods were found for the parameters tested. The instrument is reliable and is now used as the routine clinical chemistry analyser in two of the three laboratories taking part in the evaluation.     

Effects of texture and temperature on the kinetic of aroma release from model dairy custards

The structure of a foodstuff, and its perceived texture, are important characteristics involved in the sensory availability of flavour compounds released during the food consumption. This study identifies the effect of texture on the dynamic release of aroma compounds under simulated oral conditions (temperature and shearing). Two custard desserts, with two levels of texture but the same composition, flavoured with four aroma compounds, were analysed. The rheological behaviour of the custards and the release of aroma compounds (SPME analysis) were simultaneously followed, using a mouth simulator. The custard with the lowest texture level showed the highest kinetic release for all aroma compounds studied. With fast increase of temperature (10–25 °C), the decrease in viscosity of the custards and its impact on flavour release seemed to be less important than the heat transfer inside the products and its effect on partition of aroma compounds.     

Effects of acute progesterone administration upon responses to acute psychosocial stress in men.

Animal studies suggest that neuroactive steroids, in particular progesterone and its metabolites, have stress-dampening effects. However, few studies have explored these effects in humans. In this study, we investigated the effects of acute progesterone administration on responses to the Trier Social Stress Test (TSST). Healthy men participated in the TSST 3.5 hrs after intramuscular injection of 0, 50, or 100 mg progesterone (N = 16, 14, and 14). We measured cardiovascular (heart rate, blood pressure), hormonal (plasma adrenocorticotrophic hormone, cortisol, and noradrenaline), and subjective (e.g., anxiety, arousal) responses to stress in the three groups. Before the TSST, progesterone injections increased plasma levels without altering physiological or subjective states. Stress produced its expected physiological and subjective effects among placebo-treated individuals. Progesterone 50 mg attenuated peak increases in plasma cortisol and reduced changes in negative mood and alertness after stress, yet it increased plasma noradrenaline and systolic blood pressure. Progesterone 100 mg also attenuated stress-induced increases in alertness and arousal, yet it potentiated stress-induced increases in diastolic pressure. Thus, progesterone dampened some of the psychological effects of stress but produced inconsistent effects on physiological stress responses. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Sensitivity analysis of TWT's small signal gain based on the effectof rod shape and dimensions

An extensive study aiming at analyzing the effect of rod shapes and dimensions on the gain of helix traveling wave tubes (TWTs) is performed. The evaluation of tube small-signal gain is obtained by making use of a rigorous field analysis which takes into account the helix tape model and the dielectric inhomogeneous loading conditions. Computing time to perform the analysis is extremely low compared with the time required in the case of a full wave, three-dimensional (3-D) electromagnetic simulator. The accuracy of the simulation approach has been extensively verified in a previous paper. A novel expression for the attenuation constant has been introduced in the model to improve the quality of results. The proposed study allows a better understanding of tube behavior before fabrication highlighting the contribution of the shape, the mechanical tolerances and the ϵ_r variation of the rods to the small-signal gain     

Preparation and characterisation of silica‐based nanoparticles for cisplatin release on cancer brain cells

In the present work, the preparation, characterisation, and efficiency of two different silica nanostructures as release vehicles of Cisplatin are reported. The 1‐hexadeciltrimethyl‐ammonium bromide templating agent was used to obtain mesoporous silica nanoparticles which were later loaded with Cisplatin. While sol–gel silica was very fast prepared using an excess of acetic acid during the hydrolysis–condensation reactions of tetraethylorthosilicate and at the same time the Cisplatin was added. Several physicochemical techniques including spectroscopies, electronic microscopy, X‐ray diffraction, N₂ adsorption–desorption were used to characterise the silica nanostructures. An in vitro Cisplatin release test was carried out using artificial cerebrospinal fluid. Finally, the toxicity of all silica nanostructures was tested using the C6 cancer cell line. The spectroscopic results showed the suitable stabilisation of Cisplatin into the two different silica nanostructures. A large surface area was obtained for the mesoporous silica nanoparticles, while low areas were obtained in the silica nanoparticles. Cisplatin was released faster from mesoporous silica channels than from inside of aggregates nanoparticles silica. Cisplatin alone, as well as, cisplatin released from both silica nanostructures exerted a toxic effect on cancer cells. In contrast, both silica structures without the drug did not exert any toxic effect.Inspec keywords: cellular biophysics, desorption, adsorption, biomedical materials, sol‐gel processing, silicon compounds, cancer, toxicology, nanofabrication, brain, condensation, mesoporous materials, nanoparticles, X‐ray diffraction, nanomedicine, drugs, aggregates (materials)Other keywords: mesoporous silica channels, silica‐based nanoparticles, cancer brain cells, silica nanostructures, 1‐hexadeciltrimethyl‐ammonium bromide, mesoporous silica nanoparticles, sol‐gel silica, C6 cancer cell line, in vitro cisplatin release test, C6 cancer cell line, acetic acid, hydrolysis‐condensation reactions, tetraethylorthosilicate, physicochemical techniques, electronic microscopy, X‐ray diffraction, N₂ adsorption‐desorption, artificial cerebrospinal fluid, toxicity, toxic effect, N₂ , SiO₂      

Between Elderly Parents and Grandchildren—Geographic Proximity and Trends in Four-Generation Families

In an ageing society, families may have an important role in the caretaking and well-being of the elderly. Demographic changes have an impact on the size and structure of families; one aspect is how intergenerational support is distributed when there is a need for support to both older and younger generations at the same time. Another vital aspect of the provision of care for the elderly is geographic proximity. This study is oriented towards the potential “both-end carers” i.e. persons who have grandchildren in potential need of care while still having living ageing parents. The incidence of having grandchildren and having living parents at age 55 and the proximity between generations is described using Swedish register data. The results show that the share of 55-year-olds who are grandparents decreased dramatically from 70% to 35% between 1990 and 2005. As expected, more 55-year-olds have living parents—a proportion that increased from 37% to 47% during this period. As a result of delayed childbearing among the children of these cohorts, the likelihood of belonging to a four-generation family among 55-year-olds has not increased, despite increased longevity. Furthermore, most individuals live within daily reach of their kin and no evidence was found of a trend of increasing geographic distances between generations.     

Atomic force microscopy and contact angle studies of polymerizable gemini surfactant admicelles on mica

Atomic force microscopy (AFM) was used to directly observe and characterize a polymer‐modified mica surface prepared using a polymerizable gemini surfactant. Normal tapping mode and contact mode AFM were used to image the treated mica surface morphologies in air and liquid environments, respectively. The root mean square (RMS) roughness of mica surfaces before and after surface modification and polymerization was analyzed from these scans. To determine the effect of styrene adsolubilization on the surfactant‐modified mica, AFM measurements of the modified mica were made at various styrene concentrations. Contact angle measurements were also made to further characterize the nature of the surfactant‐modified mica surface. The surface morphology and surface hydrophilicity were observed to be different for the modified mica after polymerization. In addition, the polymerized surface maintained its morphology after washing/desorption studies demonstrating the stability of the polymerized surfactant film. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Laboratory studies into how glass-reinforced plastic (GRP) vat surfaces can be repaired without causing migration of styrene into foodstuffs

Glass–fiber-reinforced plastic (GRP) vats are used widely for the storage of foodstuffs and potable water. As the inner surfaces deteriorate during decades of use, they need to be repaired. The unsaturated polyester resins that are used for recoating are crosslinked with styrene which can cause taint and odor problems. This article describes some coating parameters that affect the content of residual styrene and its subsequent migration. The influences of cure temperature and duration, along with the effect of washing with warm detergent solution, were investigated. Cured specimens were tested for their residual styrene content and for styrene migration into the food simulants, distilled water, 3% acetic acid, and 15% ethanol. The dominant factor in reducing the amount of residual styrene is the temperature. The resin self-heats as it cures, typically up to 50°C. Thus, any further lowering of the styrene content requires a higher cure temperature than this. A 3-h cure at 80°C reduced both the residual content and the migration levels by about 100-fold. At lower cure temperatures, the heating effect of washing at 60°C is more important than the washing effect of the detergent. When less catalyst was used the residual styrene levels rose dramatically, from 70 to 360 to 1300 mg/kg for the normal dose, half and quarter the normal dose, respectively. There was a linear relationship between residual content in the GRP and the migration levels. This correlation could be used for monitoring the quality of vats repaired in situ, using styrene-based coating resins.