Generation of spatio-temporal concentration profiles for cell culture systems: A case study in ammonia

Cellular behavior is influenced by micro-concentration gradients existing in their immediate spatio-environment. A practical real-time measurement system, composed of miniaturized long-lasting sensors placed within a two-dimensional bioreactor and a 32-channel data acquisition system for ammonia, is presented in this paper aiming to generate the spatio-temporal ammonia concentration profiles for the whole culture process. Our results demonstrate the feasibility of the system and its applicability in elucidating the cell growth micro-environment within a bioreactor, which can potentially facilitate the intelligent control of ammonia levels in cell culture systems. The presented system is flexible enough to interface other sensors for generating their spatio-temporal profiles of the sensed cell culture parameters.     

Disaggregate energy consumption and industrial production in South Africa

This paper tries to assess the relationship between disaggregate energy consumption and industrial output in South Africa by undertaking a cointegration analysis using annual data from 1980 to 2005. We also investigate the causal relationships between the various disaggregate forms of energy consumption and industrial production. Our results imply that industrial production and employment are long-run forcing variables for electricity consumption. Applying the [Toda, H.Y., Yamamoto, T., 1995. Statistical inference in vector autoregressions with possibly integrated processes. Journal of Econometrics 66, 225–250] technique to Granger-causality, we find bi-directional causality between oil consumption and industrial production. For the other forms of energy consumption, there is evidence in support of the energy neutrality hypothesis. There is also evidence of causality between employment and electricity consumption as well as coal consumption causing employment.     

Optimal design of conical springs

Mechanical systems often use springs to store energy though their axial length must sometimes be significantly reduced. This leads to the use of conical springs as they are able to telescope. Designers of mechanical systems can call on a large number of tools to assist them though most of these are merely validation tools requiring concomitant trial and error strategies. Optimization strategies can be applied to provide synthesis assistance tools for which the designer simply specifies his requirement. Thus the tool directly indicates the spring best suited to standards and requirements. Recent advances in the study of constant pitch conical springs have provided analytical expressions of their behavior even in the non-linear phase. Considering this, we have used optimization strategies to provide a synthesis tool for conical spring design. An example of application is presented. The tool introduced here is thus a synthesis assistance tool that can be of considerable interest for designers who require a conical spring in their design.     

Synthesis and biological activity of medium range molecular weight polymers containing exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthalimidocaproic acid

A new monomer, exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthalimidocaproic acid (ETCA), was prepared by reaction of maleimidocaproic acid and furan. The homopolymer of ETCA and its copolymers with acrylic acid (AA) or with vinyl acetate (VAc) were obtained by photopolymerizations using 2,2‐dimethoxy‐2‐phenylacetophenone as an initiator at 25 °C. The synthesized ETCA and its polymers were identified by FTIR, ¹H NMR and ¹³C NMR spectroscopies. The apparent average molecular weights and polydispersity indices determined by gel permeation chromatography (GPC) were as follows: M_n = 9600 g mol^?1, M_w = 9800 g mol^?1, M_w/M_n = 1.1 for poly(ETCA); M_n = 14 300 g mol^?1, M_w = 16 200 g mol^?1, M_w/M_n = 1.2 for poly(ETCA‐co‐AA); M_n = 17 900 g mol^?1, M_w = 18 300 g mol^?1, M_w/M_n = 1.1 for poly(ETCA‐co‐VAc). The in vitro cytotoxicity of the synthesized compounds against mouse mammary carcinoma and human histiocytic lymphoma cancer cell lines decreased in the following order: 5‐fluorouracil (5‐FU) ≥ ETCA > polymers. The in vivo antitumour activity of the polymers against Balb/C mice bearing sarcoma 180 tumour cells was greater than that of 5‐FU at all doses tested. © 2001 Society of Chemical Industry     

Reynolds stress and turbulence estimates in bottom boundary layer of Fall of Warness

A broadband acoustic Doppler current profiler (ADCP) moored on the seabed at 42 m depth has been used to observe the mean and turbulent flow components in the tidally energetic Fall of Warness channel over two tidal cycles. The Reynolds stress has been estimated from the difference in variance between the along-beam velocities of opposing acoustic beams. Near bed stress at 2.63 m above seabed (mab) exceeds 7.5 Pa at the time of mean flow (speed of ~ 1.3 m s^− 1) while the ebb stresses are limited to ~ 3.31 Pa during the peak ebb, mean, flow of ~ 1.3 m s^− 1. The production of turbulent kinetic energy (TKE), P was found to be negative below 2 × 10^− 9 W m^− 3 and up to 6 × 10^− 4 W m^− 3 was estimated during flood flows and decreasing to 3 × 10^− 4 W m^− 3. The TKE dissipation rate ε was estimated by inertial dissipation method (IDM) with the greatest value of 2.43 × 10^− 2 W m^− 3 observed near the seabed around maximum ebb, falling to 5.75 × 10^− 5 W m^− 3 around slack water. The comparison between P and ε was performed by calculating individual ratios of P corresponding to ε using a bootstrap resampling technique. The study shows that the ratio ε/P averaged over whole flood and ebb were found to be ~ 0.4138 and ~ 0.4177, respectively, indicating that production exceeded dissipation. The uncertainties in Reynolds stress estimates due to instrument noise were found to be 3 × 10^− 4 Pa while 4.52 × 10^− 2 Pa can be attributed to the uncertainties due to the increase in the flow-related component.     

Absorbing photonic crystals for silicon thin-film solar cells: Design,fabrication and experimental investigation

In this paper, we present the integration of an absorbing photonic crystal within a thin-film photovoltaic solar cell. Optical simulations performed on a complete solar cell revealed that patterning the hydrogenated amorphous silicon active layer as a 2D photonic crystal membrane enabled to increase its integrated absorption by 28 % between 300 and 720 nm, comparing to a similar but unpatterned stack. In order to fabricate such promising cells, we developed a high throughput process based on holographic lithography and reactive ion etching. The influences of the parameters taking part in those processes on the obtained patterns are discussed. Optical measurements performed on the resulting “photonized” solar cell structures underline the regularity of the 2D pattern and a significant absorption increase above 550 nm, similarly to what is observed on the simulated absorption spectra. Moreover, our patterned cells are found to be robust with regards to the angle of incidence of the light.     

New carbon composite adsorbents for the removal of textile dyes from aqueous solutions: Kinetic,equilibrium, and thermodynamic studies

New carbon composite materials were prepared by pyrolysis of mixture of coffee wastes and red mud at 700 °C with the inorganic: organic ratios of 1.9 (CC-1.9) and 2.2 (CC-2.2). These adsorbents were used to remove reactive orange 16 (RO-16) and reactive red 120 (RR-120) textile dyes from aqueous solution. The CC-1.9 and CC-2.2 materials were characterized using Fourier transform infrared spectroscopy, Nitrogen adsorption/desorption curves, scanning electron Microscopy and X-ray diffraction. The kinetic of adsorption data was fitted by general order kinetic model. A three-parameter isotherm model, Liu isotherm model, gave the best fit of the equilibrium data (298 to 323 K). The maximum amounts of dyes removed at 323 K were 144.8 (CC-1.9) and 139.5 mg g^?1 (CC-2.2) for RO-16 dye and 95.76 (CC-1.9) and 93.80 mg g^?1 (CC-2.2) for RR-120 dye. Two simulated dyehouse effluents were used to investigate the application of the adsorbents for effluent treatment.     

Experimental comparison of classical PID and model-free control: Position control of a shape memory alloy active spring

Shape memory alloys (SMA) are being more frequently integrated into engineering applications. These materials with their shape memory effect enable the simplification of mechanisms and the reduction in size of actuators. SMA parts can easily be activated by Joule effect but their modeling and consequently their control remains difficult. It is principally due to their non-linear hysteretic thermomechanical behavior. Most of successful control strategies applied to SMA actuators are not often suitable for industrial applications: they are particularly heavy and use the Preisach model or neural networks to model the hysteretic behavior of these materials; this kind of model is difficult to identify and to use in real time. This paper deals with an application of the new framework of model-free control (MFC) of an SMA-spring based actuator. This control strategy relies on new results for fast derivative estimation of noisy signals. Their main advantages are: its simplicity and its robustness. Experimental results and comparisons with PI control are presented that demonstrate the efficiency of this new control strategy.