A comparative study on the electrical and mechanical behaviour of multi‐walled carbon nanotube composites prepared by diluting a masterbatch with various types of polypropylenes

Polypropylene (PP) nanocomposites with multi‐walled carbon nanotubes (CNT) were produced by a small‐scale masterbatch melt dilution technique using five PP differing in melt flow index (MFI) and degree of maleination. PP used in a masterbatch has MFI = 12 (PP₁₂), the others used PP which have MFI = 2 or MFI = 8. The state of CNT dispersion as assessed by melt rheological and morphological investigations indicated a better dispersion when using unmodified PP with MFI = 8 (PP₈) and the masterbatch's PP₁₂. Electrical conductivity results showed nanotube percolation at contents between 1.1 and 2.0 vol %, whereas lower values were obtained for the matrices with the best dispersion, i.e., PP₈ and PP₁₂. The dependencies of the relative Young's modulus on the CNT content showed that the maleinization improved the interfacial interactions between the components, especially in the case of maleated PP with MFI = 8 (PP‐MA₈), but the better dispersion was prevented by the incompatibility between polar groups of PP‐MA and the nonpolar origin masterbatch PP₁₂. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Fabrication and Testing of Oxide/Oxide Microcomposites with Monazite and Hibonite as Interlayers

Oxide/oxide microcomposites were fabricated and tested to evaluate the effectiveness of monazite (LaPO₄) and hibonite (CaAl₁₂O₁₉) as interlayers in sapphire-reinforced Al₂O₃-matrix composites. For interlayer thicknesses of 0.3-0.5 µm, both interlayers showed evidence of crack deflection; however, debond lengths in hibonite-coated specimens were limited to just a small fraction of the fiber diameter. Monazite-coated specimens showed multiple matrix cracks and extensive debonding at the coating/matrix interface. Composite strengths were relatively high for both coatings, considering the fiber strength degradation during processing. The strengths were greater than the calculated matrix cracking stresses. However, the mean strengths were not significantly different from those of the control specimens, although coated composites had higher Weibull moduli. The lack of difference in strength is attributed to porosity in the matrix. The results imply that matrix density needs to be >85% to evaluate novel interface strategies reliably.     

中间包等离子加热和电磁搅拌复合技术的开发与使用

在连铸过程中,严格的钢水温度控制是保证连铸坯质量的前提,所以中包温度控制技术成为炼钢研究的方向之一。其中,中包等离子加热技术由于控制灵活,设备简单和清洁无污染具有广阔的应用前景。与感应加热相比,等离子加热在中包包型设计和维护成本上具有明显的优势。另外一面,与感应加热90%的加热效率相比,等离子加热仅有60%的加热效率。因此,如何提高等离子加热效率成为制约其发展的关键因素。ABB对于电磁搅拌和等离子加热相结合的方案做了大量的数值研究分析。结果显示,仅使用等离子加热,那么加热室的上部钢液由于浮力作用而滞流,导致传热效率低下,这是由于等离子加热形成了巨大的温度梯度造成的。结合使用EMS,加热室内的钢液以0.2～0.4 m/s的速度旋流,这加速了中包内钢水的对流传热,使得中包内的钢液温度均匀化,减小了中包水口处的温度波动,提高了等离子加热的热效率。同时,通过等离子加热和电磁搅拌相结合的方式能促进夹杂物上浮,达到净化钢水的作用。     

Electrochemical nitrite nanosensor developed with amine- and sulphate-functionalised polystyrene latex beads self-assembled on polyaniline

Aniline doped with polyvinyl sulphonate (PV-SO₃⁻) was electropolymerised on screen printed carbon (SPCE) and glassy carbon (GCE) electrodes. Then nano-structured polystyrene (PS_NP) latex beads functionalised with amine (PS_NP-NH₂) and sulphate (PS_NP-OSO₃⁻) were self-assembled on the modified SPCE and GCE. The resultant polyaniline nanocomposites (PANI|PS_NP-NH₂ or PANI|PS_NP-OSO₃⁻) were characterised by cyclic voltammetry (CV), UV-vis spectroscopy and scanning electron microscopy (SEM). Brown-Anson analysis of the multi-scan rate CV responses of the various PANI films gave surface concentrations of the order of 10⁻⁸ mol cm⁻². UV-vis spectra of the PANI films dissolved in dimethyl sulphoxide showed typical strong absorbance maxima at 480 and 740 nm associated with benzenoid π-π* transition and quinoid excitons of polyaniline, respectively. The SEM images of the PANI nanocomposite films showed cauliflower-like structures that are <100 nm in diameter. When applied as electrochemical nitrite sensor, sensitivity values of 60, 40 and 30 μA/mM were obtained for electrode systems containing PANI|PS_NP-NH₂, PANI and PANI|PS_NP-SO₃⁻, respectively. The corresponding limits of detection of the sensors were 7.4, 9.2 and 38.2 μM NO₂⁻.     

Galvanic corrosion of aluminium alloy members of bridge guiderails under severe atmospheric exposure conditions

ABSTRACT

Aluminium alloys are nowadays preferred as materials for bridge guiderails especially for bridges connecting oceanic islands or spanning inlets due to their inherent corrosion resistance. But because of the limited mechanical strength of aluminium alloy, fasteners of guiderail members are made from steel materials. It has been found that contact between bare steel fasteners and aluminium alloy members can cause galvanic corrosion in the aluminium alloy. Research was carried out to investigate the capability of different surface treatments on fasteners and aluminium alloy members to inhibit galvanic corrosion under atmospheric exposure for periods of one and three years. It was found, among other results, that stainless steel fasteners treated with zinc flake coating were the most effective inhibitors of galvanic corrosion on aluminium alloy members.     

TNFα-Induced LDL Cholesterol Accumulation Involve Elevated LDLR Cell Surface Levels and SR-B1 Downregulation in Human Arterial Endothelial Cells

Excess lipid droplets are frequently observed in arterial endothelial cells at sites of advanced atherosclerotic plaques. Here, the role of tumor necrosis factor alpha (TNFα) in modulating the low-density lipoprotein (LDL) content in confluent primary human aortic endothelial cells (pHAECs) was investigated. TNFα promoted an up to 2 folds increase in cellular cholesterol, which was resistant to ACAT inhibition. The cholesterol increase was associated with increased ¹²⁵I-LDL surface binding. Using the non-hydrolysable label, Dil, TNFα could induce a massive increase in Dil-LDL by over 200 folds. The elevated intracellular Dil-LDL was blocked with excess unlabeled LDL and PCSK9, but not oxidized LDL (oxLDL), or apolipoprotein (apoE) depletion. Moreover, the TNFα-induced increase of LDL-derived lipids was elevated through lysosome inhibition. Using specific LDLR antibody, the Dil-LDL accumulation was reduced by over 99%. The effects of TNFα included an LDLR cell surface increase of 138%, and very large increases in ICAM-1 total and surface proteins, respectively. In contrast, that of scavenger receptor B1 (SR-B1) was reduced. Additionally, LDLR antibody bound rapidly in TNFα-treated cells by about 30 folds, inducing a migrating shift in the LDLR protein. The effect of TNFα on Dil-LDL accumulation was inhibited by the antioxidant tetramethythiourea (TMTU) dose-dependently, but not by inhibitors against NF-κB, stress kinases, ASK1, JNK, p38, or apoptosis caspases. Grown on Transwell inserts, TNFα did not enhance apical to basolateral LDL cholesterol or Dil release. It is concluded that TNFα promotes LDLR functions through combined increase at the cell surface and SR-B1 downregulation.     

Modelling tempering behaviour of dark chocolates from varying particle size distribution and fat content using response surface methodology

Central Composite Rotatable Design (CCRD) for K = 2 was used to study the combined effects of multi-stage heat exchangers for Stages 1 (14–30 °C) and 2 (12–28 °C) coolant temperatures at constant Stage 3 coolant and holding temperatures during tempering of dark chocolates using laboratory-scale mini-temperer. Quantitative data on chocolate temper index (slope) were obtained for products with varying particle size distribution (PSD) (D₉₀ of 18, 25, 35 and 50 μm) and fat (30% and 35%) content. Regression models generated using stepwise regression analyses were used to plot response surface curves, to study the tempering behaviour of products. The results showed that both Stage 1 and Stage 2 coolant temperatures had significant linear and quadratic effects on the crystallization behaviour causing wide variations in chocolate temper index during tempering of products with variable PSD and fat content. Differences in fat content exerted the greatest variability in temperature settings of the different zones for attaining well-tempered products. At 35% fat content, changes in PSD caused only slight and insignificant effect on tempering behaviour. No unique set of conditions was found to achieve good temper in dark chocolate with a specified tempering unit. Thus, different combinations of temperatures could be employed between the multi-stage heat exchangers to induce nucleation and growth of stable fat crystal polymorphs during tempering. Variations in tempering outcomes of the dark chocolates were dependent more on the fat content than PSD.

Industrial relevance

Tempering consists of shearing chocolate mass at controlled temperatures to promote cocoa butter crystallization in a stable polymorphic form. During industrial processing, multi-stage heat exchangers are used to control temperature adjustments to promote formation of appropriate stable polymorphic crystals to obtain products with good snap, colour, contraction, gloss and shelf life characteristics. The process employs varying time–temperature throughputs of the multi-stage units making it difficult to obtain standard tempering conditions for products with variable particle sizes and fat content, thus prolonging equipment standardization periods with consequential effects on processing times and product quality characteristics. Modelling the tempering behaviour of dark chocolates from varying PSD and fat content would enhance our knowledge and understanding on the optimal temperature conditions for obtaining good tempered products during industrial manufacture, with significance for reducing processing (tempering) times and assurances in quality and shelf characteristics.     

Biosorptive removal of Pband Cd onto novel biosorbent: Defatted Carica papaya seeds

Carica papaya seeds, an agricultural waste in Nigeria, were defatted to obtain defatted C. papaya seed biosorbent. The Fourier Transformed Infrared spectrum of defatted C. papaya seed biosorbent suggests the presence of CO, OH of carboxylic acid, lactonic and amide band functional groups. The adsorption of metal ion onto defatted C. papaya seed biosorbent led to small shifts in the IR bands. The adsorption capacity of defatted C. papaya seed biosorbent was evaluated to be 1666.67 mg/g for Pb²⁺ and 1000.00 mg/g for Cd²⁺. In binary metal ion solution, the defatted C. papaya seeds showed decreased adsorption capacity for either metal ion. The influence of different particle sizes was found to have negative impact on the adsorption capacity of C. papaya seed biosorbent in the removal of Pb²⁺ and Cd²⁺ from aqueous solution. The adsorption of both metal ions was observed to follow the Freudlich model better than the Langmuir model suggesting that the adsorption of both metal ions was on multisites on the defatted C. papaya seed biosorbent. The adsorption was found to be highly feasible, spontaneous and exothermic in nature. Optimization results suggests 5 m³ of 100 mg/L of Pb²⁺ and Cd²⁺ requires 43.3 and 49.2 kg of defatted C. papaya seeds to remove 95% of the metal ions from aqueous solution.     

Biosorption of Methyl violet onto palm kernel fiber: Diffusion studies and multistage process design to minimize biosorbent mass and contact time

Determination of the overall rate controlling step in the biosorption of Methyl violet dye onto a new biosorbent, palm kernel fiber has been determined. Pseudo-second-order model described the kinetics over the whole contact time period for the effect of initial concentration and temperature. Using the Wu’s approaching equilibrium factor, R_w, it was observed that the time for the switch from initial biosorption to intraparticle diffusion is affected by initial concentration and temperature. A comparison between the activation parameters of film diffusion, pseudo-second order ion exchange and intraparticle diffusion revealed that film diffusion is the overall slowest step in the biosorption process. Temperature increased the biosorption capacity but reduced slightly the rate of intraparticle diffusion, indicating that the biosorbent surface was activated by temperature which limited the diffusion of Methyl violet molecules into the interior of the biosorbent. A multistage process design to minimize mass and contact time was done.     

Variable Sets and Fuzzy Rating Interval for Water Allocation Options Assessment

Optimal water allocation is an important means of improving water use efficiency. However, since water allocation options are usually characterized by multi-region, multi-principle and multi-criterion factors, decision-makers often have difficulty in making objective decisions using them because the many available water allocation options often make the ratings of the options so close to be ranked. This study present a hierarchy variable sets (VS) model, based on the single-layer variable sets model, for ranking the water allocation options of Jining City, China. The ratings of the options are evaluated using a fuzzy rating interval (FRI) that can overcome homogenization in the ratings. The structure of the model presented in this study is clear with a simple procedure of computation and the result is rational. The case study used illustrates that this model can help decision-makers know the rating of water allocation options partially and overall. The computed result from this model appears more convincing than a previous water allocation approach for the city based on the maximum entropy principle.