Ultrathin PECVD epitaxial Si solar cells on glass via low‐temperature transfer process

Fabrication of high‐quality ultrathin monocrystalline silicon layers and their transfer to low‐cost substrates are key steps for flexible electronics and photovoltaics. In this work, we demonstrate a low‐temperature and low‐cost process for ultrathin silicon solar cells. By using standard plasma‐enhanced chemical vapor deposition (PECVD), we grow high‐quality epitaxial silicon layers (epi‐PECVD) from SiH₄/H₂ gas mixtures at 175 °C. Using secondary ion mass spectrometry and transmission electron microscopy, we show that the porosity of the epi‐PECVD/crystalline silicon interface can be tuned by controlling the hydrogen accumulation there. Moreover, we demonstrate that 13–14% porosity is a threshold above which the interface becomes fragile and can easily be cleaved. Taking advantage of the H‐rich interface fragility, we demonstrate the transfer of large areas (∽10 cm²) ultrathin epi‐PECVD layers (0.5–5.5 µm) onto glass substrates by anodic bonding and moderate annealing (275–350 °C). The structural properties of transferred layers are assessed, and the first PECVD epitaxial silicon solar cells transferred on glass are characterized. Copyright © 2016 John Wiley & Sons, Ltd.     

球体城市

文章试图以德国哲学家彼得·斯洛特戴克在《空间》三部曲中提出的"球体"和"气泡"概念来理解当代全球城市所面临的复杂空间状况,并挑战以往建筑学中占主导的水平主义。同时,文章追溯了现代主义的发展历史中曾出现过的"球体城市"实践,特别是俄国构成主义、20世纪中期以米歇尔·拉贡为主的国际前瞻建筑团体、库哈斯的"囚禁中的城市",以及全球化背景下,"球体策略"在上海、深圳这类城市中的进一步运用。     

利用电压基准产生稳定流入电流源

正无源元件长期测试用模拟电路,比如0.1%公差电阻或高强度白光LED,经常需要恒流。利用两个运算放大器和一个电压基准,你就能开发出一种提供恒定流入电流源,其可变设定范围是0mA至0.99A。图1所示电路使稳定电     

Electrochemical nitrite nanosensor developed with amine- and sulphate-functionalised polystyrene latex beads self-assembled on polyaniline

Aniline doped with polyvinyl sulphonate (PV-SO₃⁻) was electropolymerised on screen printed carbon (SPCE) and glassy carbon (GCE) electrodes. Then nano-structured polystyrene (PS_NP) latex beads functionalised with amine (PS_NP-NH₂) and sulphate (PS_NP-OSO₃⁻) were self-assembled on the modified SPCE and GCE. The resultant polyaniline nanocomposites (PANI|PS_NP-NH₂ or PANI|PS_NP-OSO₃⁻) were characterised by cyclic voltammetry (CV), UV-vis spectroscopy and scanning electron microscopy (SEM). Brown-Anson analysis of the multi-scan rate CV responses of the various PANI films gave surface concentrations of the order of 10⁻⁸ mol cm⁻². UV-vis spectra of the PANI films dissolved in dimethyl sulphoxide showed typical strong absorbance maxima at 480 and 740 nm associated with benzenoid π-π* transition and quinoid excitons of polyaniline, respectively. The SEM images of the PANI nanocomposite films showed cauliflower-like structures that are <100 nm in diameter. When applied as electrochemical nitrite sensor, sensitivity values of 60, 40 and 30 μA/mM were obtained for electrode systems containing PANI|PS_NP-NH₂, PANI and PANI|PS_NP-SO₃⁻, respectively. The corresponding limits of detection of the sensors were 7.4, 9.2 and 38.2 μM NO₂⁻.     

Nitrogen balances in farmers fields under alternative uses of a cover crop legume: a case study from Nicaragua

Canavalia brasiliensis (canavalia), a drought tolerant legume, was introduced into the smallholder traditional crop-livestock production system of the Nicaraguan hillsides as green manure to improve soil fertility or as forage during the dry season for improving milk production. Since nitrogen (N) is considered the most limiting nutrient for agricultural production in the target area, the objective of this study was to quantify the soil surface N budgets at plot level in farmers fields over two cropping years for the traditional maize/bean rotation and the alternative maize/canavalia rotation. Mineral fertilizer N, seed N and symbiotically fixed N were summed up as N input to the system. Symbiotic N₂ fixation was assessed using the ¹⁵N natural abundance method. Nitrogen output was quantified as N export via harvested products. Canavalia derived in average 69% of its N from the atmosphere. The amount of N fixed per hectare varied highly according to the biomass production, which ranged from 0 to 5,700 kg ha^?1. When used as green manure, canavalia increased the N balance of the maize/canavalia rotation but had no effect on the N uptake of the following maize crop. When used as forage, it bears the risk of a soil N depletion up to 41 kg N ha^?1 unless N would be recycled to the plot by animal manure. Without N mineral fertilizer application, the N budget remains negative even if canavalia was used as green manure. Therefore, the replenishment of soil N stocks by using canavalia may need a few years, during which the application of mineral N fertilizer needs to be maintained to sustain agricultural production.     

Modeling nitrate fluxes at the catchment scale using the integrated tool CAWAQS

Nitrates fluxes in the Grand Morin basin (1200 km(2)), that is subjected to intense agricultural pressure, are considered using in-stream observations (around 250 sampling days over 5 years) and physically based simulations using the CAWAQS model (CAtchment WAter Quality Simulator). In-stream nitrate concentration averaged 6 mg N L(-1), increasing by approximately 0.2 mg N L(-1) yr(-1) around this value (period 1991-1996). Our results show that, over the period of 1991-1996, the differences between in-stream observed nitrate concentrations and simulated nitrate concentrations result from nitrate losses at the basin scale. These losses are due to denitrification by transfer through wetlands, alluvial plains, the hyporheic zone, and by benthic processes in rivers. A mean annual mass balance at the basin scale indicates that 40% of the infiltration flux (3360 kg N km(-2) yr(-1)) is removed from the system via the river network, 40% is stored in aquifers and 20% is lost by denitrification (period 1991-1996).     

Changes in lipid content and composition during germination of groundnuts

The cotyledons of two varieties of germinating groundnut seeds (Runner and Bunch) were analysed periodically for their lipid content and fatty acid composition over a period of 132 h. The lipid content decreased drastically during germination. More drastic changes in lipid constituents were observed for light-grown seedlings than for dark-grown ones. In general, the non-polar lipids (NPL) were metabolised faster than the polar ones (P > 0.05) especially in those seeds grown in the dark. The rate of decrease in NPL content almost paralleled that of increase in glycolipid (GL) content. Triacyl glycerol content decreased noticeably during germination while other NPL tended to increase. Among the GL, sterylglucoside increased rapidly during early germination under darkness, only to decrease steadily thereafter. A converse effect was observed for acyl sterylglucoside which, in the dark, decreased rapidly at early germination only to increase equally rapidly later on. Among the phospholipids (PL), only phosphatidic acid showed a marked increase during germination, under both growth conditions, while others tended to decrease in varying degrees. The changing patterns of GL and PL during germination seem to follow the pattern of the formation of photosynthetic tissues and the metabolic conversion of PL. The major fatty acids of the three lipid groups, which more or less decreased or increased in varying degrees with germination in light-grown seeds were oleic, linoleic, palmitic, stearic, arachidic and lignoceric acids in decreasing order of prominence at early germination.     

Delay and state observation for SISO nonlinear systems with input delay

This paper deals with the problem of state and delay estimation for SISO nonlinear systems with an unknown time‐varying delay in the input. The main idea is to approximate the delayed input by using Taylor's theorem and to create an extended system with the delay as part of the extended state. Then, the construction of an observer is proposed to estimate both state and delay. The results are illustrated by simulations.     

A Highly Efficient Algorithm for Phased-Array mmWave Massive MIMO Beamforming

With the rapid development of the mobile internet and the internet of things (IoT), the fifth generation (5G) mobile communication system is seeing explosive growth in data traffic. In addition, low-frequency spectrum resources are becoming increasingly scarce and there is now an urgent need to switch to higher frequency bands. Millimeter wave (mmWave) technology has several outstanding features—it is one of the most well-known 5G technologies and has the capacity to fulfil many of the requirements of future wireless networks. Importantly, it has an abundant resource spectrum, which can significantly increase the communication rate of a mobile communication system. As such, it is now considered a key technology for future mobile communications. MmWave communication technology also has a more open network architecture; it can deliver varied services and be applied in many scenarios. By contrast, traditional, all-digital precoding systems have the drawbacks of high computational complexity and higher power consumption. This paper examines the implementation of a new hybrid precoding system that significantly reduces both calculational complexity and energy consumption. The primary idea is to generate several sub-channels with equal gain by dividing the channel by the geometric mean decomposition (GMD). In this process, the objective function of the spectral efficiency is derived, then the basic tracking principle and least square (LS) techniques are deployed to design the proposed hybrid precoding. Simulation results show that the proposed algorithm significantly improves system performance and reduces computational complexity by more than 45% compared to traditional algorithms.     

Time dependent behavior of elements combining ultra-high performance fiber reinforced concretes (UHPFRC) and reinforced concrete

Structural elements combining Ultra-High Performance Fiber Reinforced Concretes (UHPFRC) and concrete offer a high potential in view of rehabilitation and modification of existing structures. The investigation of the time-dependent behavior of composite “UHPFRC-concrete” elements is a fundamental step in the determination of durability and serviceability. For this, an experimental program was conducted on large composite “UHPFRC-concrete” beams and a numerical model was validated with the test results. The experimental results and a parametric study performed with the numerical model showed that UHPFRC and normal strength reinforced concrete are compatible in the long-term and that the critical period of composite “UHPFRC-concrete” elements are the first 90 days after the casting of the UHPFRC layer. Thus, the high potential of such composite elements can be exploited also in the long term.