Effect of iron enrichment with GIC or FeCl3 on the pore structure and reactivity of coking coal

The effect of a Lewis acid addition to a coking coal on the porosity and reactivity towards steam of the resulting iron enriched coal chars are studied. GIC (FeCl₃ graphite intercalation compound) or free FeCl₃ are used as iron containing additives. Coal iron enrichment was performed using either directly FeCl₃ in vapour phase, or by mixing of coal and additives in decaline or by common grinding of coal and additives under argon. Iron enriched coals were carbonized at 750°C (heating RATE = 5°C min) and activation made with pure steam at 800°C to a burn-off off of 50 wt%. The pore structures of coal chars before and after activation were evaluated on the basis of CO₂ and C₆H₆ sorption at 25°C. A significant development of the microporosity is observed in the iron enriched char before activation and its steam reactivity is also increased. After activation, BET surface area values are increased in presence of iron, and porosity is mainly microporous.     

Interdiffusion between silica thin films and soda-lime glass substrate during annealing at high temperature

We study the diffusive interaction between soda-lime glass substrates and sputtered aluminum-doped silica thin films at 650°C, the temperature of commercial soda-lime glass shaping or tempering. A first rapid migration of alkali ions from substrate to thin film has been described in a companion paper (J Am Ceram Soc. 2018;101:1516). Using the same samples as (J Am Ceram Soc. 2018;101:1516), we focus here on later interactions, when the layer is consumed by the substrate resulting from diffusive interactions. Using Secondary Ion Mass Spectroscopy profilometry, we show that the interdiffusion rate increases with the aluminum doping content of the layer. We show that the alkali uptake of silica layers accelerates diffusive exchanges with the substrate, consistently with a decrease of viscosity of the layer. Diffusion profiles of silicon are well reproduced when solving the diffusion equation for a diffusivity having an exponential dependence with silicon concentration. The diffusivity of aluminum is shown to be 10 times slower than the diffusion of silicon. Specific exchanges of the two network formers with network modifiers are deduced from the composition-space trajectories, providing evidence for multicomponent diffusive couplings between species.     

Lamin-Related Congenital Muscular Dystrophy Alters Mechanical Signaling and Skeletal Muscle Growth

Laminopathies are a clinically heterogeneous group of disorders caused by mutations in the LMNA gene, which encodes the nuclear envelope proteins lamins A and C. The most frequent diseases associated with LMNA mutations are characterized by skeletal and cardiac involvement, and include autosomal dominant Emery–Dreifuss muscular dystrophy (EDMD), limb-girdle muscular dystrophy type 1B, and LMNA-related congenital muscular dystrophy (LMNA-CMD). Although the exact pathophysiological mechanisms responsible for LMNA-CMD are not yet understood, severe contracture and muscle atrophy suggest that mutations may impair skeletal muscle growth. Using human muscle stem cells (MuSCs) carrying LMNA-CMD mutations, we observe impaired myogenic fusion with disorganized cadherin/β catenin adhesion complexes. We show that skeletal muscle from Lmna-CMD mice is unable to hypertrophy in response to functional overload, due to defective fusion of activated MuSCs, defective protein synthesis and defective remodeling of the neuromuscular junction. Moreover, stretched myotubes and overloaded muscle fibers with LMNA-CMD mutations display aberrant mechanical regulation of the yes-associated protein (YAP). We also observe defects in MuSC activation and YAP signaling in muscle biopsies from LMNA-CMD patients. These phenotypes are not recapitulated in closely related but less severe EDMD models. In conclusion, combining studies in vitro, in vivo, and patient samples, we find that LMNA-CMD mutations interfere with mechanosignaling pathways in skeletal muscle, implicating A-type lamins in the regulation of skeletal muscle growth.     

Non-Catalyzed and Pt/γ-Al2O3 Catalyzed Hydrothermal Cellulose Dissolution-Conversion: Influence of the Reaction Parameters

The dissolution of cellulose under 5 MPa of H₂ in the absence of catalyst is temperature and time dependant. The presence of Pt/γ-Al₂O₃ increases the initial rate of dissolution. The presence of H₂/Pt is essential although its exact role has not been well elucidated.     

Tracking the sources of nitrate in groundwater using coupled nitrogen and boron isotopes: a synthesis

Nitrate (NO3) is one of the world's major pollutants of drinking water resources. Although recent European Directives have reduced input from intensive agriculture, NO3 levels in groundwater are approaching the drinking water limit of 50 mg L(-1) almost everywhere. Determining the sources of groundwater contamination is an important first step toward improving its quality by emission control. It is with this aim that we review here the benefit of using a coupled isotopic approach (delta15N and delta11B), in addition to conventional hydrogeological analyses, to trace the origin of NO3 in water. The studied watersheds include both fractured bedrock and alluvial (subsurface and deep) hydrogeological contexts. The joint use of nitrogen and boron isotope systematics in each context deciphers the origin of NO3 in the groundwater and allows a semi-quantification of the contributions of the respective pollution sources (mineral fertilizers, wastewater, and animal manure).     

Particle-based Liquid Control using Animation Templates

It is notoriously difficult for artists to control liquids while generating plausible animations. We introduce a new liquid control tool that allows users to load, transform, and apply precomputed liquid simulation templates in a scene in order to control a particle-based simulation. Each template instance generates control forces that drive the global simulated liquid to locally reproduce the templated liquid behavior. Our system is augmented with a variable proportion of temporary particles to help efficiently reproduce the templated liquid density, with fewer requirements on the surrounding environment. The resulting control strategy adds only a small computational overhead, leading to quick visual feedback for resolutions allowing interactive simulation. We demonstrate the robustness and ease of use of our method on various examples in 2D and 3D.     

Modeling and detecting response of micromachining square and circular membranes transducers based on AlN thin film piezoelectric layer

Vibration analysis of square and circular piezoelectric micro ultrasonic transducers (pMUTs) in the 100 kHz range as a function of experimental tools are reported. Analytical and 3D finite element method analysis using Comsol software has been performed to model static, modal and vibration behavior of these membranes. Comparison with standard impedancemeter measurement is shown to assess the performance of Laser Doppler Vibrometry system. Mechanical and electrical characterization and comparison with a model results are presented and discussed. The measured resonances frequencies of membrane can be weak and superimposed on important parasitic signal, which may mask the desired mechanical resonance signal. Our results revealed the real roles of the simulations and the combination of the experimental tools to get measurement accuracy. Subsequently, this piezoelectric micro-transducer was successfully tested as a sounder in air. These investigations offer guidance for the pMUTs design and associated electronic circuit but might at the same time be instructive and beneficial to further sensor applications.

     

Full process for integrating silicon nanowire arrays into solar cells

A novel process was developed for integrating silicon nanowire arrays into solar cells. n-Type silicon nanowires were grown by chemical-vapour deposition via the gold-catalysed vapour-liquid-solid method, on a p-type silicon substrate. After the growth, the nanowire array was planarized, by embedding the nanowires in a spin-on glass matrix and subsequent chemical-mechanical polishing of the front surface. This planarization step allows to deposit a continuous and uniform conductive film on top of the nanowire array, and thus to form a high-quality front electrical contact. For an illumination intensity of 100 mW/cm², our devices exhibit an energy conversion efficiency of 1.9%. The main performance limiting factor is a high pn junction reverse current, due to contamination by the growth catalyst or to a lack of passivation of surface electronic defects.