Improvements in Noise Suppression for I/O Circuits Using Embedded Planar Capacitors

The performance of embedded planar capacitors in noise suppression of input/output (I/O) circuits and improvements in board impedance profile have been investigated in this paper. Simultaneous switching noise (SSN) is a critical issue in today's systems and this paper shows performance improvements by introducing thin planar embedded capacitors in the board stack up. Measurement and modeling results by including the effects of transmission lines and the power ground plane pairs in the board stack up in the gigahertz range quantify the performance of the embedded capacitors.     

Defects in nickel ferrite thin films grown by chemical vapour deposition

Thin single-crystal films of nickel ferrite have been grown on magnesia substrates. The structure of the films has been examined using X-ray diffraction, scanning electron microscopy and transmission electron microscopy and diffraction. The films are characterized by arrays of planar faults on {110} due to faults in cation arrangements in the nickel ferrite spinel lattice. The origin of these defects is discussed.     

Mechanics and dynamics of general milling cutters.: Part I: helical end mills

A variety of helical end mill geometry is used in the industry. Helical cylindrical, helical ball, taper helical ball, bull nosed and special purpose end mills are widely used in aerospace, automotive and die machining industry. While the geometry of each cutter may be different, the mechanics and dynamics of the milling process at each cutting edge point are common. This paper presents a generalized mathematical model of most helical end mills used in the industry. The end mill geometry is modeled by helical flutes wrapped around a parametric envelope. The coordinates of a cutting edge point along the parametric helical flute are mathematically expressed. The chip thickness at each cutting point is evaluated by using the true kinematics of milling including the structural vibrations of both cutter and workpiece. By integrating the process along each cutting edge, which is in contact with the workpiece, the cutting forces, vibrations, dimensional surface finish and chatter stability lobes for an arbitrary end mill can be predicted. The predicted and measured cutting forces, surface roughness and stability lobes for ball, helical tapered ball, and bull nosed end mills are provided to illustrate the viability of the proposed generalized end mill analysis.     

Buffer effects on the mosaic structure of the HR-GaN grown on 6H-SiC substrate by MOCVD

High-resistive GaN (>10⁸ Ω cm) layers have been grown with different buffer structures on 6H-SiC substrate using metalorganic chemical vapor deposition reactor. Different combination of the GaN/AlN super lattice, low temperature AlN, high temperature AlN and Al_xGa_1?xN (x ≈ 0.67) layers were used in the buffer structures. The growth parameters of the buffer layers were optimized for obtaining a high-resistive GaN epilayer. The mosaic structure parameters, such as lateral and vertical coherence lengths, tilt and twist angle (and heterogeneous strain), and dislocation densities (edge and screw dislocations) of the high-resistive GaN epilayers have been investigated using x-ray diffraction measurements. In addition, the residual stress behaviors in the high-resistive GaN epilayers were determined using both x-ray diffraction and Raman measurements. It was found that the buffer structures between the HR-GaN and SiC substrate have been found to have significant effect on the surface morphology and the mosaic structures parameters. On the other hand, both XRD and Raman results confirmed that there is low residual stress in the high-resistive GaN epilayers grown on different buffer structures.     

Evaluation of Natural Gas Supply Security in Turkey with Future Projection

Natural gas is one of the key energy resources for Turkey due to fact that 32% of annual primary energy supply and 45% of annual electricity production is obtained from natural gas with also common usage of residential and industrial zones. In this study, the supply security of natural gas was taken into consideration with strategic criteria of energy policy with the SWOT （strengths, weaknesses, opportunities and threats） analysis and the future projection for Turkey. It has been concluded on geopolitics criteria, domestic production and research for resources must be stimulated as high as possible and participation to abroad resources must be implemented.     

Sensing and Field Data Capture for Construction and Facility Operations

Collection of accurate, complete, and reliable field data is not only essential for active management of construction projects involving various tasks, such as material tracking, progress monitoring, and quality assurance, but also for facility and infrastructure management during the service lives of facilities and infrastructure systems. Limitations of current manual data collection approaches in terms of speed, completeness, and accuracy render these approaches ineffective for decision support in highly dynamic environments, such as construction and facility operations. Hence, a need exists to leverage the advancements in automated field data capture technologies to support decisions during construction and facility operations. These technologies can be used not only for acquiring data about the various operations being carried out at construction and facility sites but also for gathering information about the context surrounding these operations and monitoring the workflow of activities during these operations. With this, it is possible for project and facility managers to better understand the effect of environmental conditions on construction and facility operations and also to identify inefficient processes in these operations. This paper presents an overview of the various applications of automated field data capture technologies in construction and facility fieldwork. These technologies include image capture technologies, such as laser scanners and video cameras; automated identification technologies, such as barcodes and Radio Frequency Identification (RFID) tags; tracking technologies, such as Global Positioning System (GPS) and wireless local area network (LAN); and process monitoring technologies, such as on-board instruments (OBI). The authors observe that although applications exist for capturing construction and facility fieldwork data, these technologies have been underutilized for capturing the context at the fieldwork sites as well as for monitoring the workflow of construction and facility operations.     

Poly(ethylene-oxide)/clay/silica nanocomposites: Morphology and thermomechanical properties

Poly(ethylene-oxide) PEO/clay/silica nanocomposites were prepared via solution intercalation by exploiting phase separation based on the bridging of particles by polymer chains. The intercalated morphology of nanocomposites was confirmed by XRD. Vibrational modes of the ether oxygen of PEO in the hybrids are shifted due to the coordination of the ether oxygen with the sodium cations of clay and the H-bonding interactions of the ether oxygen with the surface silanols of hydrophilic fumed silica. Based on SEM, the overall density of nanoparticle aggregates in the interspherulitic region was observed to be higher compared to that inside spherulites. PEO/clay/silica hybrids show significant property improvements compared to PEO/clay hybrids and pure PEO. The system containing 10 wt.% clay and 5 wt.% silica has substantially higher modulus and much lower crystallinity compared to the 15 wt.% clay system. The physics behind the reinforcement effect and the reduction of crystallinity as a function of fumed silica loading is discussed based on the morphological characterization of the hybrids. Lastly, PEO/clay/silica hybrids display good thermal stability and are much stiffer compared to pure PEO and PEO/clay nanocomposites.