Flexible and Autonomous Integrated System for Characterizing Metal Oxide Gas Sensor Response in Dynamic Environment

Characterization and calibration of gas sensor is a complex problem due to the dynamic behavior of gases and the limitations of current technology. This article reports a flexible, robust, and autonomous integrated system that is able to perform characterization on metal oxide-based gas sensors in dynamic environments. The system controls the concentration and flow of the relevant gases into the gas chamber and simultaneously measuring the sensor response. This feature allows the characterization of the sensor under continuous dynamic flow of gases similar to conditions on a robot or flow pipes. Several experiments have been performed on the system using hydrogen sulfide. The results provide information on the general characteristics of the sensor as well as its sensitivity. The noise levels were studied with different reference voltages. Overall, the results verify that the system is reliable and able to produce repeatable measurements.     

Simplified Monthly Hydrology and Irrigation Water Use Model to Explore Sustainable Water Management Options in the Murray-Darling Basin

We aimed to provide whole-of-basin simulations of flows and diversions in the Murray-Darling Basin for economic and policy analysis. We describe a model based on a subdivision of the basin into 58 catchments. In each catchment, the monthly runoff, river flow and irrigation demand are modelled as lumped processes. This is the first single model of the whole of the Murray-Darling Basin. The model was calibrated using monthly flow and annual diversion records, both by trial and error and using an automated method. We use the model to examine the impact on the flow and diversions in the Murray-Darling Basin of proposed diversion reductions and climate change. The diversion reductions return water to the environment, increasing river flows below the main irrigation areas. However, a middle-of-the-range climate change projection may result in a 13 % decrease in total flows in 2030, which offsets the enhancement to flows gained by diversion reductions.     

Gene-expression programming for flip-bucket spillway scour

During the last two decades, researchers have noticed that the use of soft computing techniques as an alternative to conventional statistical methods based on controlled laboratory or field data, gave significantly better results. Gene-expression programming (GEP), which is an extension to genetic programming (GP), has nowadays attracted the attention of researchers in prediction of hydraulic data. This study presents GEP as an alternative tool in the prediction of scour downstream of a flip-bucket spillway. Actual field measurements were used to develop GEP models. The proposed GEP models are compared with the earlier conventional GP results of others (Azamathulla et al. 2008b; RMSE = 2.347, δ = 0.377, R = 0.842) and those of commonly used regression-based formulae. The predictions of GEP models were observed to be in strictly good agreement with measured ones, and quite a bit better than conventional GP and the regression-based formulae. The results are tabulated in terms of statistical error measures (GEP1; RMSE = 1.596, δ = 0.109, R = 0.917) and illustrated via scatter plots.     

Compact yet efficient hardware implementation of artificial neural networks with customized topology

There are several neural network implementations using either software, hardware-based or a hardware/software co-design. This work proposes a hardware architecture to implement an artificial neural network (ANN), whose topology is the multilayer perceptron (MLP). In this paper, we explore the parallelism of neural networks and allow on-the-fly changes of the number of inputs, number of layers and number of neurons per layer of the net. This reconfigurability characteristic permits that any application of ANNs may be implemented using the proposed hardware. In order to reduce the processing time that is spent in arithmetic computation, a real number is represented using a fraction of integers. In this way, the arithmetic is limited to integer operations, performed by fast combinational circuits. A simple state machine is required to control sums and products of fractions. Sigmoid is used as the activation function in the proposed implementation. It is approximated by polynomials, whose underlying computation requires only sums and products. A theorem is introduced and proven so as to cover the arithmetic strategy of the computation of the activation function. Thus, the arithmetic circuitry used to implement the neuron weighted sum is reused for computing the sigmoid. This resource sharing decreased drastically the total area of the system. After modeling and simulation for functionality validation, the proposed architecture synthesized using reconfigurable hardware. The results are promising.     

Preference-based multi-objective evolutionary algorithms for power-aware application mapping on NoC platforms

Network-on-chip (NoC) are considered the next generation of communication infrastructure in embedded systems. In the platform-based design methodology, an application is implemented by a set of collaborative intellectual property (IP) blocks. The selection of the most suited set of IPs as well as their physical mapping onto the NoC infrastructure to implement efficiently the application at hand are two hard combinatorial problems that occur during the synthesis process of Noc-based embedded system implementation. In this paper, we propose an innovative preference-based multi-objective evolutionary methodology to perform the assignment and mapping stages. We use one of the well-known and efficient multi-objective evolutionary algorithms NSGA-II and microGA as a kernel. The optimization processes of assignment and mapping are both driven by the minimization of the required silicon area and imposed execution time of the application, considering that the decision maker’s preference is a pre-specified value of the overall power consumption of the implementation.     

Form-Profiling of Optics Using the Geometry Measuring Machine and the M-48 CMM at NIST

We are developing an instrument, the Geometry Measuring Machine (GEMM), to measure the profile errors of aspheric and free form optical surfaces, with measurement uncertainties near 1 nm. Using GEMM, an optical profile is reconstructed from local curvatures of a surface, which are measured at points on the optic’s surface. We will describe a prototype version of GEMM, its repeatability with time, a measurements registry practice, and the calibration practice needed to make nanometer resolution comparisons with other instruments. Over three months, the repeatability of GEMM is 3 nm rms, and is based on the constancy of the measured profile of an elliptical mirror with a radius of curvature of about 83 m. As a demonstration of GEMM’s capabilities for curvature measurement, profiles of that same mirror were measured with GEMM and the NIST Moore M-48 coordinate measuring machine. Although the methods are far different, two reconstructed profiles differ by 22 nm peak-to-valley, or 6 nm rms. This comparability clearly demonstrates that with appropriate calibration, our prototype of the GEMM can measure complex-shaped optics.     

A new external sorting algorithm with no additional disk space

This paper is concerned with an external sorting algorithm with no additional disk space. The proposed algorithm is a hybrid one that uses Quicksort and special merging process in two distinct phases. The algorithm excels in sorting a huge file, which is many times larger than the available memory of the computer. This algorithm creates no extra backup file for manipulating huge records. For this, the algorithm saves huge disk space, which is needed to hold the large file. Also our algorithm switches to special merging process after the first phase that uses Quicksort. This reduces the time complexity and makes the algorithm faster.     

Reduction of the Nitrate Content in Baby Spinach Leaves by Vacuum Impregnation with Sucrose

Vacuum impregnation (VI) has been widely utilized as a pre-treatment method prior to, e.g., the minimal processing, freezing, or drying of foods. In many cases, VI has been used to focus on the enrichment of fruits and vegetables with probiotics or micronutrients, texture enhancement, the modification of the sensory attributes, and extension of shelf life by pH reduction. However, little attention has been paid to the exploration of the metabolic consequences of VI that could lead to changes in the quality characteristics of plant tissues. Since nitrate has long been discussed as a compound that is harmful to human health, the aim of this investigation was to reduce the nitrate content in spinach leaves by feeding sucrose into the tissue using VI. The leaves, either non-treated or treated with VI, were stored under saturated humidity conditions and in darkness at 8 °C, for up to 72 h. VI-treated leaves showed a remarkable reduction in nitrate content as compared to the non-treated samples. Upon storage, sucrose was reduced, indicating that this sugar had been respired and had induced metabolization of the stored nitrate. The nitrite content of the treated leaves was unaffected, proving that this toxic compound was not accumulated in the baby spinach leaves upon external sucrose feeding.     

Failure Investigation of Boiler Water Wall Tubes of a Thermal Power Station

Failure investigation was carried out on boiler water wall tubes of a thermal power plant through visual inspection, chemical analysis, and metallurgical analysis. Failure was in the form of thin/micro cracks along the length of the tubes which were located at the girth welding joint of tubes. Experimental results revealed that the cracking was from inward to outward of the tube thickness. Discontinuities/cavities were observed in the welded region which might have occurred due to lack of fusion of base metal and the weld metal. Cracks were initiated from the sharp corner/crack tip of the cavities/discontinuities present at the welded region under the action of hoop/thermal stress existed during the operation. Nature of the crack propagation indicates the case of typical hydrogen-induced cracking. Moreover, the presence of the cavities/discontinuities reduced the cross-sectional area of tubes resulting increased stress intensity. Increased stress beyond the flow stress of the material assisted by hydrogen-induced effect resulted the cracking of the tubes. In order to mitigate the problem, proper welding of tubes joints should be carried out followed by proper inspection after weld. Secondly, hydrogen dissolution during welding should be prevented and treatment for its removal after welding should be carried out.