Nanostructured TiO2-based mixed metal oxides prepared using microemulsions for carbon monoxide detection

Nanostructured powders of Nb-doped TiO₂ (TN) and SnO₂ mixed with Nb-doped TiO₂ in two different atomic ratios—10 to 1 (TSN 101) and 1 to 1 (TSN 11)—were synthesized using the reverse micelle microemulsion of a nonionic surfactant (brine solution/1-hexanol/Triton X-100/cyclohexane). The powders were characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD). Thick films were fabricated for gas sensors and characterized by XRD analysis and field emission scanning electron microscopy (FE-SEM). The effects of the film morphology and firing temperature in the range 650–850 °C on CO sensitivity were studied. The best gas response, expressed as the ratio between the resistance in air and the resistance under gas exposure (R _air/R _gas), was measured for TSN 11 at 11 for 1,000 ppm CO exposure. All types of sensors showed good thermal stability. The electrochemical impedance spectroscopy (EIS) measurements were performed in different gas atmospheres (air, O₂, CO and NO₂) to better understand the electrical properties of the nanostructured mixed metal oxides.     

Prescriptions,X-rays and Grocery Lists. Designing a Personal Health Record to Support (The Invisible Work Of) Health Information Management in the Household

For many years the introduction of Electronic Health Records (EHRs) in medical practice has been considered the best way to provide efficient document sharing among different organizational settings. The actual results of these technologies, though, do not seem to have matched expectations. The issue of document sharing has been lately readdressed by proposing the creation of patient-controlled information and communication technologies, Personal Health Records (PHRs), providing laypeople the tools to access, manage and share their health information electronically by connecting to the existing EHRs and other institutional information systems. In this scenario, patients are called to play a major role in coordinating healthcare professionals by providing them the information they need. From a CSCW perspective the PHR offers an interesting case to reflect on cooperative work that requires new infrastructures that intersect organizational settings and extend into domestic environments. So far though, there has not been enough research to shed light on the self-care activities carried out in the households and how these integrate with the organizational practices of doctors and institutions. Our analyses show that health record keeping is an articulation work necessary for meetings with doctors to proceed smoothly. To do so, people integrate the information contained in medical documents by working on them with annotations, underlinings and integrations. Moreover, we show that health record keeping is a spatialized activity that is inextricably interwoven with the everyday routine and objects. Finally, we provide a tentative classification of three different strategies laypeople use to sort out health records: minimum effort, adaptive, networking.     

Effects of electrical and mechanical parameters on the transient voltage stability of a fixed speed wind turbine

In this paper the dynamic behaviour of a wind turbine connected to the grid is examined. The model of the fixed speed wind turbine has been developed with the Simulink simulation tool (Matlab Inc.) It is composed of the induction generator, the shaft system, an aerodynamic model of the wind turbine rotor and the pitch control system. Using this model, a three-phase fault is applied close to the wind turbine and cleared by disconnecting the faulty line.The rigorous implementation of the simulink model allowed the authors to evaluate the exact dependence of various electrical parameters for the induction generator on voltage stability. Furthermore, the effects of wind turbine mechanical construction and of grid parameters on voltage stability are also evaluated and discussed.For each parameter, the terminal voltage and the generator rotor speed for different fault-clearing times are drawn. Finally, the terminal voltage and the generator rotor speed obtained for a fifth order model of the induction generator are compared with those obtained for a third order model. The differences between the two models are discussed. The results will help to understand transient stability phenomena in wind farms.     

Imidazolium poly(butylene terephthalate) ionomers with long-term antimicrobial activity

Imidazolium poly(butylene terephthalate) ionomers with ionic groups located randomly along the polymer chain or selectively as end-groups (telechelic) have been prepared in order to determine their antimicrobial (AM) activity. Two different approaches have been followed for the linkage of the imidazolium to the polymer backbone: a covalent bond and an ionic aggregation to sulfonated groups covalently bonded to the polymer. The ionic groups have been linked to the polymer in order to improve the long-term AM activity since the low molecular weight additives commonly used tends to migrate toward the surface during use. We have found that imidazolium ionomers present AM activity comparable with that of commercial antimicrobial agents such as Triclosan. The AM activity depends on the polymer architecture, the telechelic approach being more active compared to the random approach. We have proved that imidazolium ionomers retain their high AM activity even after 6 days in water at 60 °C while Triclosan consistently loses his activity.     

Role of Nitrate Species in the “NO2-SCR” Mechanism over a Commercial Fe-zeolite Catalyst for SCR Mobile Applications

The NO₂-SCR reaction is studied by transient reaction analysis over a Fe-zeolite commercial catalyst. It is proposed that the NO₂-SCR reaction occurs according to a mechanism wherein surface nitrates are first formed by NO₂ disproportionation, followed by their catalytic reduction to nitrogen by ammonia.     

The total quasi-steady-state approximation for complex enzyme reactions

Biochemistry in general and enzyme kinetics in particular have been heavily influenced by the model of biochemical reactions known as Michaelis–Menten kinetics. Assuming that the complex concentration is approximately constant after a short transient phase leads to the usual Michaelis–Menten (MM) approximation (or standard quasi-steady-state approximation (sQSSA)), which is valid when the enzyme concentration is sufficiently small. This condition is usually fulfilled for in vitro experiments, but often breaks down in vivo. The total QSSA (tQSSA), which is valid for a broader range of parameters covering both high and low enzyme concentrations, has been introduced in the last two decades. We extend the tQSSA to more complex reaction schemes, like fully competitive reactions, double phosphorylation, Goldbeter–Koshland switch and we show that for a very large range of parameters our tQSSA provides excellent fitting to the solutions of the full system, better than the sQSSA and the single reaction tQSSA. Finally, we discuss the need for a correct model formulation when doing “reverse engineering”, which aims at finding unknown parameters by fitting the model to experimentally obtained data. We show that the estimated parameters are much closer to the real values when using the tQSSA rather than the sQSSA, which overestimates the parameter values greatly.     

ATM layouts with bounded hop count and congestion

Summary. In this paper we introduce and analyze two new cost measures related to the communication overhead and the space requirements associated with virtual path layouts in ATM networks, that is the edge congestion and the node congestion. Informally, the edge congestion of a given edge e at an incident node u is defined as the number of VPs terminating at or starting from u and using e, while the node congestion of a node v is defined as the number of VPs having v as an endpoint. We investigate the problem of constructing virtual path layouts allowing to connect a specified root node to all the others in at most h hops and with maximum edge or node congestion c, for two given integers h and c. We first give tight results concerning the time complexity of the construction of such layouts for both the two congestion measures, that is we exactly determine all the tractable and intractable cases. Then, we provide some combinatorial bounds for arbitrary networks, together with optimal layouts for specific topologies such as chains, rings and grids. Received: December 1997 / Accepted: August 2000     

Sensitivity analysis for fixed-priority real-time systems

At early stages in the design of real-time embedded applications, the timing attributes of the computational activities are often incompletely specified or subject to changes. Later in the development cycle, schedulability analysis can be used to check the feasibility of the task set. However, the knowledge of the worst-case response times of tasks is often not sufficient to precisely determine the actions that would correct a non-schedulable design. In these situations, sensitivity analysis provides useful information for changing the implementation, by giving a measure of those computation times that must be reduced to achieve feasibility, or those that can be increased in case of a product extension, or providing the range of feasible periods for selecting the proper task activation rates. In this work, we exploit the concept of feasibility region to propose a faster and more concise solution to the sensitivity analysis problem with respect to existing techniques based on binary search. Furthermore, we show how the formalization of other problems in the feasibility domain, such as managing overloads through elastic scheduling, can be extended to the exact analysis.