Effect of solidification microstructure on corrosion behavior of the chill zone in aluminum binary alloys

The corrosion behavior in NaCl solutions of as-cast Al-Cu, Al-Mg and Al-Zn alloys has been studied in relation to the substructures obtained during the solidification process on the surface of the chill zone. Metallographic, microprobe and X-ray techniques have been used to identify the equilibrium precipitates and to estimate the solute distribution in the alloys. The attack produced on predendritic, dendritic and interdendritic zones has been studied by optical microscopy and by scanning electron microscopy. By using potentiostatic techniques, it has been found that localized corrosion occurred above certain potentials corresponding to the pitting potentials of the phases present in the alloys.     

Influence of air temperature on drying kinetics and antioxidant potential of olive pomace

This work aims to evaluate the influence of olive pomace drying (a solid by-product of the olive oil industry) on both antioxidant potential and drying kinetics. The two main fractions of olive pomace (pits, PI and pulps + peels, P + P) were characterized by image analysis and density measurement. The drying process was analyzed in experiments carried out at different temperatures (from 50 to 150 °C) and mathematically described from the diffusion and Weibull models. The antioxidant potential of the extracts (ethanol–water 80:20 v/v, 22 ± 1 °C, 170 rpm for 24 h) obtained from the dry product was analyzed by measuring the total phenolic content and antioxidant capacity and the main polyphenols were quantified by HPLC–DAD/MS–MS.     

Physical and Antioxidant Characterization of Edible Films Added with Red Prickly Pear (<Emphasis Type="Italic">Opuntia ficus-indica</Emphasis> L.) cv. San Martín Peel and/or Its Aqueous Extracts

The aim of this research was to investigate the effect of the addition of peel powder and/or its aqueous extract on physical and antioxidant characteristics of carboxymethyl cellulose (CMC) edible films. Prickly pear peel powder and aqueous extract (2 and 4%) were characterized in color, bioactive compounds (betalains and total phenolic compounds), antioxidant capacity and reducing power. Edible films were prepared with CMC, glycerol, varying the dissolution medium (0, 2, or 4% aqueous extract from prickly pear peel) and peel powder (0, 1, or 2%) using a face-centered central composite design. Physical, mechanical, bioactive compounds, and antioxidant capacity properties were investigated in edible films. Prickly pear peel powder presented 58.8 ± 0.08 mg of betacyanins/100 g, 53.8 ± 0.2 mg of betaxanthins/100 g, 967.8 ± 20 mg Gallic acid equivalent (GAE)/100 g for total phenolic compounds, an antioxidant capacity equivalent to 420.9 ± 4.9 mg GAE/100 g and a reducing power of 879.1 ± 115.9 mg ascorbic acid equivalent (AAE)/100 g. High concentration of aqueous extract and peel powder in CMC films increased the bioactive compounds content, antioxidant capacity and reducing power. Films mechanical properties were not affected by the aqueous extract; nevertheless, were strongly affected by the peel powder. Response surface methodology was used to optimize edible films formulation with high antioxidant characteristics, being the optimal formulation 1.7% of peel powder plus 3.3% of aqueous extract. This study may be the base for exploitation of prickly pear peel as source of bioactive compounds with antioxidant capacity for their use in edible coatings.     

Impact of Heat Moisture Treatment and Hydration Level of Flours on the Functional and Nutritional Value-Added Wheat-Barley Blended Breads

The impact of heat moisture treatment (HMT) of flours on the techno-functional and nutritional patterns of binary flour bread matrices (wheat/barley, WT/CB, 60:40, w/w) was investigated in untreated (?) and HMT (+) samples made at 160 and 170 dough yield (DY) levels. Assessment was performed by determining viscoelastic (stress relaxation test) and mechanical (double compression test) behaviours, volume (seed displacement), colour (Photoshop system), crumb grain (digital image analysis), starch digestibility (enzyme hydrolysis) and staling kinetics (Avrami equation), bioaccessible polyphenol content (digestive enzymatic mild extraction) and anti-radical activity (DPPH●). A superior functional profile was provided by HMT of CB flour in the blend WT?CB+ when hydrated at DY 170 compared to the untreated control WT?CB?. The sample exhibited a similar specific volume, more cohesive, springier, more resilient crumb, with similar rate and extent of crumb firming on ageing, and similar colour pattern but finer and more uniformly sized cell structure, and deserved similar sensory ratings as the control WT?CB? concerning cell uniformity, smoothness and typical smell and taste. Digestible starch kinetic curves of blended breads pointed out samples WT?CB+ and WT+CB+ as matrices expliciting a lower degree and slower rate of starch hydrolysis when mixed at low and high DY, respectively. A similar anti-radical activity for composite bread matrices was evidenced regardless of either HMT or DY.     

Use of mild irradiation doses to control pathogenic bacteria on meat trimmings for production of patties aiming at provoking minimal changes in quality attributes

The objectives of the present work were to assess the use of moderate doses of gamma irradiation (2 to 5 kGy) and to reduce the risk of pathogen presence without altering the quality attributes of bovine trimmings and of patties made of irradiated trimmings. Microbiological indicators (coliforms, Pseudomonas spp and mesophilic aerobic counts), physicochemical indicators (pH, color and tiobarbituric acid) and sensory changes were evaluated during storage. 5 kGy irradiation doses slightly increased off flavors in patties. Two pathogenic markers (Listeria monocytogenes and Escherichia coli O157:H7) were inoculated at high or low loads to trimming samples which were subsequently irradiated and lethality curves were obtained. Provided that using irradiation doses ≤ 2.5 kGy are used, reductions of 2 log CFU/g of L. monocytogenes and 5 log CFU/g of E. coli O157:H7 are expected. It seems reasonable to suppose that irradiation can be successfully employed to improve the safety of frozen trimmings when initial pathogenic bacteria burdens are not extremely high.     

Combined effects of lactic acid and nisin solution in reducing levels of microbiological contamination in red meat carcasses

Changes in bacterial counts on beef carcasses at specific points during slaughter and fabrication were determined, and the effectiveness of nisin, lactic acid, and a combination of the lactic acid and nisin in reducing levels of microbiological contamination was assessed. Swab samples were obtained from the surfaces of randomly selected beef carcasses. Carcasses were swabbed from the neck, brisket, and renal site after skinning, splitting, and washing. Treatments involving lactic acid (1.5%), nisin (500 IU/ml), or a mixture of nisin and lactic acid were applied after the neck area was washed. A control group was not sprayed. Results indicated that the highest prevalence of aerobic plate counts (APCs), total coliforms, and Escherichia coli was found in the neck site after splitting, and the lowest level of microbial contamination was found after skinning. Washing with water did not significantly reduce the bacterial load. The largest reduction in APCs, total coliforms, and E. coli occurred on carcasses treated with a mixture of nisin and lactic acid. A mixture of nisin and lactic acid can be applied to beef carcasses through spray washing and can reduce bacterial populations by 2 log units.     

Phage types, virulence genes and PFGE profiles of Shiga toxin-producing Escherichia coli O157:H7 isolated from raw beef, soft cheese and vegetables in Lima (Peru)

The present study was conducted in Lima Metropolitana to evaluate the prevalence of Shiga toxin-producing Escherichia coli (STEC) O157:H7 in raw beef, raw ground beef, soft cheese and fresh vegetables, sampled at different markets in the city. Between October 2000 and February 2001, 407 food samples were collected from different markets in the 42 districts of Lima Metropolitana. Samples were assayed for E. coli O157 by selective enrichment in modified Tryptic Soy Broth containing novobiocin, followed by immunomagnetic separation (IMS) and plating onto sorbitol MacConkey agar supplemented with cefixime and potassium tellurite. Fifty (12.3%) of 407 food samples resulted positive for E. coli O157 isolation (23 of 102 ground beef; 15 of 102 beef meat; eight of 102 soft cheese and four of 101 fresh vegetables). Thirty-five E. coli O157 isolates were further analysed for the presence of virulence genes. All 35 were positive by PCR for O157 rfbE, fliCh7, eae-gamma1 and ehxA genes. In addition, genes encoding Shiga toxins were detected in 33 of 35 isolates, five isolates (14%) encoded stx(1), stx(2), and 28 (80%) stx2 only. The isolates were of seven different phage types (PT4, PT8, PT14, PT21, PT34, PT54, and PT87) with three phage types accounting for 80% of isolates: PT4 (15 isolates), PT14 (8 isolates), and PT21 (5 isolates). Interestingly, the majority (31 of 35; 89%) of E. coli O157:H7 isolates characterized in this study belonged mainly to the phage types previously found in STEC O157:H7 strains associated with severe human disease in Europe and Canada. Pulsed-field gel electrophoresis (PFGE) of 32 isolates revealed 14 XbaI-PFGE groups (I to XIV) of similarity >85%, with 23 (72%) isolates grouped in five clusters. Some isolates from different districts presented a high clonal relatedness. Thus, PFGE group VIII clustered eleven strains from nine different districts. The broad range of PFGE subtypes found in this study demonstrates the natural occurrence of many genetic variants among STEC O157:H7 spread in Lima.     

Instrumental evaluation of defective texture in dry-cured hams

In the first experiment, the effect of the stress relaxation time on texture evaluation of biceps femoris (BF) muscle from dry-cured hams was studied. The specimens were compressed to 25% of their original height and the crosshead speed was 5mm/s. The force decay versus time was recorded and Peleg's model was fitted with different relaxation times. Whatever relaxation time was used, Peleg's model did not describe simultaneously the initial fall of force and the asymptotic tendency of force decay correctly. The initial force and force decay at 2s and at 90s are proposed to assess texture in dry-cured ham. In the second experiment, stress relaxation (SR) and texture profile analysis (TPA) tests were performed on BF and semimembranosus (SM) muscles of 10 hams with abnormal softness and 10 hams with normal texture, at different assay conditions: sample temperature (4°C or 20°C); compression crosshead speed (1mm/s or 10mm/s). The instrumental texture test and the assay conditions that detected defective textures better depended on the muscle considered: for BF muscle the SR test at 4°C and at 1mm/s and for SM muscle the TPA test at 10mm/s at both 4°C or 20°C.     

Combination of hot air drying and deep‐fat frying to reduce the oil content in chicken nuggets

The combination of hot air drying and frying to reduce oil uptake in chicken nuggets was analysed. Two air velocities (2 and 4 m s^?1) and two dry bulb temperatures (44 and 61 °C) were employed in the drying process, as a treatment before or after deep‐fat frying at 160 °C for 90 s in fresh soybean oil. The lowest fat content was obtained by frying followed of drying at 61 °C with air velocity of 2 m s^?1. When drying was applied before frying, mass transfer (moisture loss) during the drying process was modelled according to Fick’s second law; diffusion coefficients ranged between 1.03 and 3.33 × 10^?6 m² s^?1. When drying was applied after frying, a constant rate period was observed during drying process, with velocities between 0.002 and 0.02 kg_water/kg_{dry solids}·min. Scanning electron microscopy (SEM) allowed to observe differences in the topography of chicken nuggets obtained from frying or the combination of frying and drying.