Isolation and partial characterization of Mexican taro (Colocasia esculenta L.) starch

Taro starch was isolated from Mexican variety and its morphological, physicochemical, and molecular characteristics were evaluated. Yield starch (in dry basis) was 81%, and this starch had low AM content (2.5%). Taro starch granules showed a mixture of shapes with sizes between 1 and 5 µm. Taro starch presented an A‐type XRD pattern with a crystallinity level of 38.26%. Solubility and water retention capacity did not change in the temperature range of 50–70°C and thereafter they increased as temperature increased too. Taro starch showed high peak viscosity due to its high AP content. The peak temperature of gelatinization of taro starch was 80.6°C with an enthalpy value of 10.6 J/g, with low retrogradation rate due to its low AM content. Weight‐average molar mass (Mw) and gyration radius (Rz) of taro starch were 1.21 ± 0.8 × 10⁹ g/mol and 424 ± 70 nm, respectively. Taro tuber could be an alternative for starch isolation with functional and physicochemical characteristics for food and non‐food applications.     

Glycoalkaloids in potato tubers: the effect of variety and drought stress on the α‐solanine and α‐chaconine contents of potatoes

Six varieties of Solanum tuberosum L potato grown in the Bolivian highlands under drought stress, with and without irrigation, were analysed for their content of glycoalkaloids (GAs). The plant material consisted of three drought‐tolerant varieties from a local breeding programme (PROINPA), Potosina, Chapaquita and Pampeña, and three control cultivated varieties, Malcacho, Sani Imilla and Desiree, either susceptible or relatively tolerant to drought. α‐Solanine and α‐chaconine were quantified in both the peel and flesh of the tubers. A significant increase in GA concentration (α‐solanine + α‐chaconine) was observed under drought stress conditions in most varieties; average concentration increases of 43 and 50% were registered in the improved and control cultivars respectively. In all tested cultivars, however, the GA concentration remained lower than the recommended food safety level (200 mg kg⁻¹ fresh tubers). It ranged from 52.4 to 100 mg kg⁻¹ fresh tubers in the improved cultivars and from 55.6 to 122.3 mg kg⁻¹ fresh tubers in the controls. In the improved and control varieties the α‐solanine content averaged 42.6 and 35.4% of the total potato GAs respectively and was not significantly affected by drought stress, except in Desiree. In all conditions the peel contained the greatest proportion of total GAs. The hybrid variety Pampeña (new drought‐tolerant variety) contained the lowest amounts of GAs, which were lower than those of the control varieties, with and without irrigation. © 2000 Society of Chemical Industry     

High-Performance Liquid Chromatography Method for the Monitoring of the <Emphasis Type="Italic">Allium</Emphasis> Derivative Propyl Propane Thiosulfonate Used as Natural Additive in Animal Feed

A new simple analytical method for monitoring propyl propane thiosulfonate (PTSO) in animal feed is presented. PTSO is an active ingredient from Allium spp. (like onion and shallot), proposed as a natural additive for feed being an efficient alternative to antibiotics used as growth promoter due to its efficiency improving animal health. Reversed-phase liquid chromatography with UV detection has been used and a previous sample treatment based on solid-liquid extraction has been developed and optimized in order to extract PTSO from a feed for laying hens using acetone as extraction solvent. The method has been characterized obtaining limits of detection and quantification of 11.2 and 37.3 mg kg^?1, respectively, which are lower than the concentrations expected in samples containing this additive. The intra- and interday relative standard deviations (RSDs) were lower than 8.3 % in all the cases, and recoveries varied from 90.2 to 94.6 %. Finally, in order to check the unequivocal identification of PTSO, mass spectrometry detection was applied. The proposed method is a simple procedure for monitoring PTSO in commercial feed, being possible to implement it in routine laboratories for quantification purposes and stability studies of the distributed products.     

GC–MS Characterization of Volatile Compounds in Habanero Pepper (Capsicum chinense Jacq.) by Optimization of Headspace Solid-Phase Microextraction Conditions

Food Analytical Methods - The habanero pepper (Capsicum chinense Jacq.) is very aromatic and is the hottest pepper in the world. In this study, a headspace solid-phase microextraction/gas...     

Breeding of lager yeast with Saccharomyces cerevisiae improves stress resistance and fermentation performance

Lager beer brewing relies on strains collectively known as Saccharomyces carlsbergensis, which are hybrids between S. cerevisiae and S. eubayanus‐like strains. Lager yeasts are particularly adapted to low‐temperature fermentations. Selection of new yeast strains for improved traits or fermentation performance is laborious, due to the allotetraploid nature of lager yeasts. Initially, we have generated new F1 hybrids by classical genetics, using spore clones of lager yeast and S. cerevisiae and complementation of auxotrophies of the single strains upon mating. These hybrids were improved on several parameters, including growth at elevated temperature and resistance against high osmolarity or high ethanol concentrations. Due to the uncertainty of chromosomal make‐up of lager yeast spore clones, we introduced molecular markers to analyse mating‐type composition by PCR. Based on these results, new hybrids between a lager and an ale yeast strain were isolated by micromanipulation. These hybrids were not subject to genetic modification. We generated and verified 13 hybrid strains. All of these hybrid strains showed improved stress resistance as seen in the ale parent, including improved survival at the end of fermentation. Importantly, some of the strains showed improved fermentation rates using 18°Plato at 18–25°C. Uniparental mitochondrial DNA inheritance was observed mostly from the S. cerevisiae parent. Copyright © 2012 John Wiley & Sons, Ltd.     

Modelling the Water Sorption Isotherms of Quinoa Seeds (<Emphasis Type="Italic">Chenopodium quinoa</Emphasis> Willd.) and Determination of Sorption Heats

Adsorption and desorption isotherms of quinoa seeds (Chenopodium quinoa Willd.) were measured using the static gravimetric method at three temperatures (20, 40 and 60 °C). Water activity ranged from 0.118 to 0.937. The moisture sorption behaviour of quinoa was temperature dependent, as indicated by a decrease in equilibrium moisture content, at all levels of a _w, with increasing temperature. Eight mathematical equations available in the literature were used to model the experimental data, namely, GAB, BET, Caurie, Henderson, Oswin, Halsey, Smith and Iglesias–Chirife. All the equations showed generally a good fit; however, the Iglesias–Chirife and Oswin equations were considered the best to predict the experimental data for both isotherms. Effect of temperature on model parameters was analysed and studied through an Arrhenius-type equation. The net isosteric heats of desorption and adsorption were determined by applying the Clausius–Clapeyron equation resulting in 69.24 kJ mol⁻¹ for desorption and 61.26 kJ mol⁻¹ for adsorption. The experimental heat data were satisfactorily modelled by Tsami’s equation.     

Processing effects for safety and quality in some non-predominant food technologies

Food functionality can be related to nutrient and non-nutrient compounds. Some foods are fortified with various nutrients whereas others are manipulated using their physicochemical properties in order to make them "functional." Texture, color, taste, odor, and other physicochemical properties may affect the overall quality and, hence, acceptance of food products. Since food safety is also an important factor to be considered in food processing, preservation methods are selected taking into account the best compromise between microbial inactivation and preservation of quality attributes. Instrumental and sensory methods, as well as a match between them, are studied and perfected in order to verify how well a specific type of food has been processed to make it "functional" in sensory terms.     

Enzymatic changes in pectic polysaccharides related to the beneficial effect of soaking on bean cooking time

BACKGROUND: Cooking time decreases when beans are soaked first. However, the molecular basis of this decrease remains unclear. To determine the mechanisms involved, changes in both pectic polysaccharides and cell wall enzymes were monitored during soaking. Two cultivars and one breeding line were studied. RESULTS: Soaking increased the activity of the cell wall enzymes rhamnogalacturonase, galactanase and polygalacturonase. Their activity in the cell wall was detected as changes in chemical composition of pectic polysaccharides. Rhamnose content decreased but galactose and uronic acid contents increased in the polysaccharides of soaked beans. A decrease in the average molecular weight of the pectin fraction was induced during soaking. The decrease in rhamnose and the polygalacturonase activity were associated (r = 0.933, P = 0.01, and r = 0.725, P = 0.01, respectively) with shorter cooking time after soaking. CONCLUSION: Pectic cell wall enzymes are responsible for the changes in rhamnogalacturonan I and polygalacturonan induced during soaking and constitute the biochemical factors that give bean cell walls new polysaccharide arrangements. Rhamnogalacturonan I is dispersed throughout the entire cell wall and interacts with cellulose and hemicellulose fibres, resulting in a higher rate of pectic polysaccharide thermosolubility and, therefore, a shorter cooking time. Copyright © 2011 Society of Chemical Industry     

Atherogenic effect of oxidized products of cholesterol

Cholesterol under certain in vitro and possibly in vivo conditions may be oxidized to oxysterols, which are suspected of being initiators of atherosclerotic plaques. Oxysterols inhibit HMG-CoA reductase activity resulting in a decreased cholesterol concentration in the cell membrane, which leads to endothelial membrane injury and probable premature cell death. Exogenous oxidation of cholesterol in human tissues under certain unusual conditions is highly probable. Dietary oxysterols are absorbed in the gastrointestinal tract and are selectively transported by the athrogenic lipoproteins LDL and VLDL. The oxysterols cholestanetriol and 25-OH cholesterol have been shown to be atherogenic. Oxysterols are commonly found in dried egg products, powdered milk, cheeses and in a variety of high temperature dried animal products.     

Maximum power point tracker based on maximum power point resistance modeling

This paper presents a new, simple, accurate, and inexpensive practical methodology and experimental solution for the modeling of conventional (domestic and commercial facilities) photovoltaic generators (PVG), so that they can work at their maximum power point (MPP). The PVG may be a panel, an array of panels, or a photovoltaic field. As a starting restriction (actual) it has to be assumed that it is not possible to isolate the PVG variables dependence (mainly current, voltage, and hence power) with solar radiation and temperature, because they are highly correlated. This methodology proposes the modeling facility on its MPP by its MPP resistance (R_MPP = V_MPP/I_MPP), being V_MPP and I_MPP the voltage and current of the PVG, respectively, at its MPP. The analysis shows, by simulation first and then experimentally, that R_MPP does not present significant temperature dependencies, at least in the usual range. This important result allows us to model the PVG only in terms of solar radiation. From a set of experimental data, different models to estimate R_MPP are proposed. The obtained results are very accurate. These models allow an immediate practical application that it is also developed in the paper: MPP tracker (MPPT) design by the calculation of the DC/DC converter duty cycle which places the PVG at its MPP directly and continuously. This new methodology and experimental system has been registered in the Spanish Patent and Trademark Office with the number P201530352. Copyright © 2015 John Wiley & Sons, Ltd.