Hydroxymethylation and polymerization of plant oil triglycerides

The ene reaction between plant oil triglycerides (such as soybean and sunflower oils) and paraformaldehyde was used to introduce a homoallylic hydroxyl functionality on the triglyceride. Paraformaldehyde and triglyceride were reacted in the presence of a Lewis acid catalyst, ethylaluminum dichloride, and hydroxymethyl derivatives were obtained at yields of 42 and 55% for sunflower oil and soybean oil, respectively. In the next step, hydroxymethyl products were reacted with maleic anhydride at 100°C to produce the maleate half esters. The average number of maleate groups per triglycerides was found to be 1.7 for soybean oil and 1.3 for sunflower oil. In the final step, the free‐radical–initiated copolymerization of the maleinized triglycerides with styrene produced rigid polymers. Characterization of new monomers and polymers was done by ¹H‐NMR, ¹³C‐NMR, and infrared and mass spectrometries. The swelling behavior of the crosslinked network polymers was determined in different solvents. The glass‐transition temperature of the cured resin was also determined by differential scanning calorimetry to be 40°C for soybean‐based polymer and 30°C for sunflower‐based polymer. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 4037–4046, 2004     

Application of ozone gas for the stripping of fabric ink‐jet‐printed with reactive dyes

In this study, a novel process utilizing ozone was carried out for colour stripping of fabrics misprinted with reactive dyes in ink‐jet machines. The results of ozone applications were compared with conventional colour stripping process performed by thiourea dioxide (TUDO) and soda ash. In trials, cotton‐based and viscose‐based woven fabrics were used as these fabrics were the most utilized at the textile mill in which this study was performed. Different ozone treatment times (30, 45, 60 or 90 min) were tested to find optimum process time and it was found that process times depended on fabric type. Particularly, colour stripping on high density and thick fabrics were harder than low density and thin fabric types. Fabric strengths, whiteness indexes and chemical oxygen demand (COD) values were measured. Also energy, chemical and water consumptions were calculated. Consequently, it was found that the reduction of the COD value of effluent was up to 98%. The calculations showed that the savings in time and cost in ozone treatment were up to 77%. Satisfactory colour stripping and tensile strengths were achieved.     

Equilibrium and kinetic mechanism for Reactive Black 5 sorption onto high lime Soma fly ash

Batch adsorption studies were carried out for the sorption of C.I. Reactive Black 5, a reactive dye, onto high lime fly ash, obtained from Soma Thermal Power Plant (Turkey), to be low cost adsorbent. The effect of various experimental parameters such as contact time, adsorbent dose and initial dye concentration were investigated. Determination of the adsorption equilibrium concentrations was determined by UV-vis spectrophotometry analytical method. Equilibrium data were fitted to the Freundlich and Langmuir isotherm equations and the equilibrium data were found to be well represented by the Freundlich isotherm equation. The adsorption kinetics of C.I. Reactive Black 5 onto high lime fly ash were also studied to characterize of the surface complexation reaction. A pseudo-second-order mechanism has been developed to predict the rate constant of the adsorption, the equilibrium capacity and initial adsorption rate with the effect of initial concentration. A single-stage batch adsorber design of the adsorption of C.I. Reactive Black 5 onto high lime fly ash has been studied based on the Freundlich isotherm equation.     

Surface Treatment of S355JR Carbon Steel Surfaces with ZrB<Subscript>2</Subscript> Nanocrystals by CO<Subscript>2</Subscript> Laser

To improve mechanical properties of S2355JR carbon steel, pre-synthesized ZrB₂ nanocrystals were used to coat the metal surface by laser cladding using 2000 W CO₂ laser. ZrB₂ nanocrystals were synthesized by mechanochemical process. The effect of laser power on the coating layers was examined for optimizing the most effective coating conditions. Microstructural studies were carried out using optical microscope, scanning electron microscope and X-ray diffraction to analyze phase structures of the coated layers. Mechanical characteristics of the laser coated layers were evaluated by studying microhardness, wear and scratch resistance properties. Maximum hardness of the coated layers was observed while cladding with 75 and 125 W laser powers, when other processing parameters and conditions were kept at optimum levels. EDS analysis of these laser cladded layers indicated the formation of complex boro-nitrides, nitrides and carbides of Zr and Fe that contributed to vast increase in hardness of the laser-clad coating on S2355JR steel. Depending upon the laser powers used, the thickness of the coated layers was found to be in the range of 15–37 µm. The wear and micro-scratch tests results revealed significant improvement in wear properties.     

A mixed integer programming model for a closed-loop supply-chain network

In this paper, a new mixed integer mathematical model for a closed-loop supply-chain network that includes both forward and reverse flows with multi-periods and multi-parts is proposed. The proposed model guarantees the optimal values of transportation amounts of manufactured and disassembled products in a closed-loop supply chain while determining the location of plants and retailers. Finally, computational results are presented for a number of scenarios to show and validate the applicability of the model.     

The tricriteria flowshop scheduling problem

Multicriteria flowshop scheduling problems have been one of the most attractive subjects in recent years. In the multicriteria flowshop scheduling literature, a very limited number of studies have been performed on problems which include a tardiness criterion. In this paper a multicriteria (tricriteria) two-machine flowshop scheduling problem with a tardiness criterion is tackled. The objective is to minimise a weighted sum of total completion time, total tardiness and makespan. An integer programming model is proposed for the problem which belongs to NP-hard class. The modified NEH (Nawaz, Enscore and Ham) algorithm, a tabu search-based heuristic method, random search and the EDD rule (the earliest due date rule) are used to solve problems with up to 2,500 jobs. A computational analysis is conducted to evaluate the performance of the heuristics. The analysis shows that the heuristics are quite efficient, and the performance of the tabu search based heuristic is the best of all in terms of solution quality.     

Determination of microwave drying and rehydration kinetics of green peppers with the bioactive and textural properties

The aim of this study was to determine the effect of microwaves on drying and rehydration kinetics of green pepper varieties (sweet, green, and bell) and the bioactive and textural properties of dried and rehydrated peppers. Drying was performed at 90, 180, and 90 + 180 W and dried peppers were rehydrated at 25, 50, and 70°C. The best drying fits were obtained using the equations of both Sigmoid and Hii et al. for drying, and two term exponential decay was the most appropriate model for rehydration. The lowest and highest final rehydration ratio values were obtained for the peppers dried at 180 and 90 W, respectively at each temperature and pepper variety. Among peppers, bell pepper showed the lowest color change (ΔE) and it was the most potent to recover initial color in rehydration. Peppers had softer texture in both drying and rehydration treatment. Total phenolic content of peppers was reduced around 56–65% compared to the fresh pepper by drying and this decrement was reached up to 87% in rehydrated peppers. Results showed that drying at 180 W and rehydration at 70°C provided faster drying and rehydration as well maintained the quality characteristics of green peppers.     

Discrete element analysis of experiments on mixing and stoking of monodisperse spheres on a grate

Understanding the details of the mixing and stoking process on grate firing systems is crucial for the optimization of the combustion process in waste or biomass incineration plants. The Discrete Element Method (DEM) can help to obtain further information on the mixing process within a bed of fuel particles. Especially the influence of a change in operational parameters can be examined avoiding large experimental effort. In the current paper five simulations for a generic grate are compared with the corresponding experiments. The experiments were carried out throughout an anterior parameter study on mixing and stoking on a grate [Sudbrock F.; Simsek E.; Wirtz S.; Scherer V.: “An experimental analysis of the influence of operational parameters on mixing and stoking of a monodisperse granulate on a grate”, Powder Technology 198, Issue 1, 29-37, 2010] [19]. The system considered is equipped with vertically moving bars which induce stoking. In a first approach monodisperse plastic spheres are used. The grate is encased by a transparent polycarbonate housing which provides optical access to the movement of the particles in the wall planes. The mixing process is measured and quantified by image analysis of the front wall of the grate. The mixing behaviour of the particle assembly observed in experiments and simulation appears to be very similar indicating that DEM is able to predict the particle mixing in the bed. In order to quantify the visual observations the mixing behaviour has been evaluated by different mixing parameters. They are compared in dependence of the number of strokes of the grate bars. A good agreement between measurements and simulations could be observed.     

Microleakage in class V cavities prepared using conventional method versus Er:YAG laser restored with glass ionomer cement or resin composite

This study evaluated the effect of tooth preparation method (diamond bur vs. Er:YAG laser) on the microleakage levels of glass ionomers and resin composite. Human permanent premolars (N = 80) were randomly divided into two groups (n = 40). Cavities on half of the teeth were prepared using diamond bur for enamel and carbide bur for dentin and the other half using Er:YAG laser. The teeth were randomly divided into four groups according to the restoration materials, namely (a) ChemFil Rock (CFR), (b) IonoluxAC (IAC), (c) EQUIA system (EQA) and one resin composite (d) AeliteLS (ALS) (n = 10 per group). Microleakage (μm) was assessed at the occlusal and gingival margins after dye penetration (0.5% basic fuchsine for 24 h). On the occlusal aspect, while the cavity preparation types significantly affected the microleakage for CFR (p = 0.015), IAC (p = 0.001) glass ionomer restorations, it did not show significant effect for glass ionomer EQA (p = 0.09) and resin composite ALS (p = 0.2). Er:YAG laser presented less microleakage compared to bur preparation in all groups except for EQA. On the gingival aspect, microleakage decreased significantly for CFR (p = 0.02), IAC (p = 0.001), except for EQA where significant increase was observed (p = 0.001) with the use of Er:YAG laser. Microleakage decrease was not significant at the gingival region between diamond bur and Er:YAG laser for ALS (p = 0.663). At the occlusal and gingival sites in all groups within each preparation method, microleakage level was not significant.