Development of a machine tool selection system using AHP

The selection of appropriate machines is one of the most critical decisions in the design and development of an efficient production environment. In this study, we propose a decision support system for machine tool selection using an effective algorithm, the analytic hierarchy process. In the selection process, we first consider qualitative decision criteria that are related to the machine properties. Reliability and precision analyses may be included in the detailed evaluation procedure. Furthermore, the decision-maker may take into account the economical considerations through cost analysis. In addition, the robustness of the selection procedure may be evaluated using sensitivity analysis. An illustrative example of machine tool selection using the proposed methodology and the software implementation are provided.     

A study on durability properties of high-performance concretes incorporating high replacement levels of slag

This paper presents an experimental study of combined effects of curing method and high replacement levels of blast furnace slag on the mechanical and durability properties of high performance concrete. Two different curing methods were simulated as follows: wet cured (in water) and air cured (at 20°C and 65% RH). The concretes with slag were produced by partial substitution of cement with slag at varying amounts of 50–80%. The water to cementitious material ratio was maintained at 0.40 for all mixes. Properties that include compressive and splitting tensile strengths, water absorption by total immersion and by capillary rise, chloride penetration, and resistance of concrete against damage due to corrosion of the embedded reinforcement were measured at different ages up to 90 days. It was found that the incorporation of slag at 50% and above-replacement levels caused a reduction in strength, especially for the early age of air cured specimens. However, the strength increases with the presence of slag up to 60% replacement for the 90 day wet cured specimens. Test results also indicated that curing condition and replacement level had significant effects on the durability characteristics; in particular the most prominent effects were observed on slag blended cement concrete, which performed extremely well when the amount of slag used in the mixture increased up to 80%.     

Comparison of total‐etch,self‐etch,and selective etching techniques on class V composite restorations prepared by Er:YAG laser and bur: a scanning electron microscopy study

The purpose of this study was to compare total‐etch, self‐etch, and selective etching techniques on the marginal microleakage of Class V composite restorations prepared by Er:YAG laser and bur. Class V cavities prepared on both buccal and lingual surfaces of 30 premolars by Er:YAG laser or bur and divided into six groups. The occlusal margins were in enamel, and the cervical margins were in cementum. Group‐1: bur preparation(bp)+Adper Single Bond 2 (ASB)+Filtek Z550 (FZ); Group‐2: laser preparation(lp)+(ASB)+(FZ); Group‐3: bp + Clearfil S3 Bond Plus (CSBP)+(FZ); Group‐4: lp+(CSBP) (FZ); Group‐5: bp + acid etching+(CSBP)+(FZ); Group‐6: lp + acid etching+(CSBP)+(FZ). All teeth were stored in distilled water at 37°C for 24 hr, and then thermocycled 1000 times (5–55°C). Five teeth from each group were chosen for the microleakage investigation, and two teeth for the scanning electron microscope evaluation. Teeth which were prepared for the microleakage test were immersed in .5% methylene blue dye for 24 hr. After immersion, the teeth were sectioned and observed under a stereomicroscope for dye penetration. Data were analyzed using Kruskal–Wallis and Mann–Whitney U tests (p < .05). More microleakage was observed in the cervical regions compared to the occlusal regions in Groups 3, 5, and 6, respectively (p < .05). There is no statistically significant difference in Groups 1, 2, and 4, in terms of cervical regions versus occlusal regions (p > .05). No significant differences were observed among any groups in terms of occlusal and cervical surfaces, separately (p > .05). Different etching techniques did not influence microleakage of Class V restorations prepared by Er:YAG laser and bur.     

The cost and risk impacts of rerouting railroad shipments of hazardous materials

Rail shipments of hazardous materials expose the population near the routes to the possibility of an accident resulting in a spill. Rail routes are determined by economic concerns such as route length and the revenue generated for the originating carrier. In this paper we consider an alternate routing strategy that takes accident risks into account. We employ a model to quantify rail transport risk and then use a weighted combination of cost and risk and generate alternate routes. In some cases the alternate routes achieve significantly lower risk values than the practical routes at a small incremental cost. While there are generally fewer rerouting alternatives for rail than for road transport, considering the possible consequences of a train derailment we argue that risk should be taken into account when selecting rail routes and that the cost-risk tradeoffs should be evaluated.     

Effects of aging on latex film formation from polystrene particles: A photon transmission study

Aging due to the storage time on latex film formation was studied using the photon transmission method. The UV visible technique was used to monitor the evolution of transparency during film formation from two different polystyrene (PS) particles produced by using two different steric stabilizers, i.e., polyvinyl alcohol and polyvinyl pyrrolidone. The latex films were prepared from PS particles at room temperature before and after aging and annealed at elevated temperatures in various time intervals above glass transition (T_g). The increase in the transmitted photon intensity I_tr was attributed to the increase in the number of disappeared particle–particle interfaces. Relative decrease in transparency and delay in film formation were observed in the aged latex films compared to the nonaged ones. The Prager–Tirrell model was employed to interpret the increase in crossing density at the junction surface. The back and forth activation energies (ΔE) were measured and found to be dependent on aging for a diffusing polymer chain across the junction surface. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 79: 2014–2021, 2001     

Renewable hydrogen energy regulations,codes and standards: Challenges faced by an EU candidate country

The European Union is one of the most important players in the field of world energy with an integrated and well-organized energy market. However, energy policies in the EU are not sustainable. The EU is the world’s largest importer of fossil fuels and is leading global action in accelerating the transition to renewable energy and low-carbon economy at present. Renewables make the second-largest contribution to domestic energy production after coal.     

Cost management through product design: target costing approach

The purpose of this study is to explore the role of target costing in managing product costs while promoting quality specifications that will meet customer requirements. In addition, it aims to develop a target costing module that will simplify implementation of target costing especially in small and medium enterprises (SMEs). Tools of operations management such as quality function deployment (QFD) and value engineering (VE) have been considered and evaluated in terms of their integration into the target costing. In order to investigate the total effect, an implementation of the QFD deployment–target costing process (QFD–TC process) was conducted in a small manufacturing company. Previous studies on target costing were mostly conducted in lead companies. This study focuses on implementation of the QFD–TC process in SMEs. Overall, it was found that the QFD–TC process was an essential technique in managing the costs of both a product and the overall production process. Combining target costing with QFD and VE techniques provides companies with a competitive cost advantage.     

Hygrothermal Fracture Analysis of Orthotropic Materials Using J k -Integral

A new computational method based on the J _k -integral is put forward for the purpose of conducting fracture analysis of orthotropic materials subjected to hygrothermal stresses. By utilizing the constitutive relations of plane orthotropic hygrothermoelasticity, an alternative expression for the J _k -integral is derived to replace the general limit definition. A numerical procedure is developed and integrated into a finite element analysis software to implement the proposed form of the J _k -integral. Temperature and specific moisture concentration fields, which are required in fracture calculations, are also computed through finite element analysis. Numerical results are generated by considering an embedded crack in a polymer matrix fibrous composite laminate, that is subjected to steady-state hygrothermal loading. Comparisons of the mixed-mode stress intensity factors computed by the J _k -integral based method to those evaluated via the displacement correlation technique demonstrate that, the proposed form of the J _k -integral is domain independent and leads to numerical results of high accuracy. Presented parametric analyses illustrate the influences of the fiber volume fraction and the crack location on the modes I and II stress intensity factors, the energy release rate, and the T-stress.     

Branched chain derivatives of alkyl oleates: Tribological,rheological, oxidation,and low temperature properties

We report the evaluation of four previously prepared oleochemical branched chain ethers (1–4) and soybean oil methyl esters (SME) against cloud point, pour point, oxidation stability, kinematic viscosity, specific gravity, lubricity, and surface tension. Ethers 1–4 exhibited excellent low temperature, oxidation stability, and lubricity behavior; however, at low blend levels (0.5, 1.0, 2.0 wt%) in SME, 1–4 had minimal impact on cloud point and pour point of SME. The specific gravity and surface tension behavior of 1–4 are nearly identical to SME. Ethers 1–4 displayed increased viscosity when compared to SME, but were still within ASTM D 6751 specifications at low blend levels in SME. Conversely, ethers 3 and 4 at 2.0% in SME were out of specification for kinematic viscosity in EN 14214. Both SME and 1–4 exhibited excellent tribological properties, as evidenced by HFRR wear scar behavior well within prescribed ASTM and CEN petrodiesel specifications.