A 1000 A/20 kV/25 kHz-500 kHz Volt-Ampere-Wattmeter for loads withpower factors from 0.001 to 1.00

Many industrial processes and scientific experiments utilize large amounts of ac power at frequencies from 3 kHz to 500 kHz. The phase angle and the impedances of these loads often vary over a wide range. This paper describes an instrument to provide an accurate measurement of currents (1 A to 1000 A), voltages (100 V to 20 kV), and powers (100 W to 20 MW) over the frequency range from 25 kHz to 500 kHz. It deals with loads having power factors down to nearly zero and with load impedances from 10 Ω to 20 kΩ. The paper contains practical details of both the design and the calibration of the front-end voltage and current transducers. The characteristics of a nearly ideal broadband current transducer are presented. Overall instrument calibration, verification and traceability problems are considered in detail     

New and used temporal models: An issue of time

TheSpecial Issue on Applications of Temporal Models raises many issues of time: What are the important properties of time? How can time be best represented? How can one reason about time-dependent properties? What are the important directions of temporal research? This introductory piece very briefly surveys the current wide variety of temporal models, temporal reasoning methods, and applications to time-varying phenomena. Promising areas of investigation such as the verification of concurrent systems, knowledge-base representation methods, and dealing with theFrame Problem pass in fleeting review. Brief introductions to each of the works in the volume close the section.     

Dislocations in strained layers: The Ge-Si system

The Ge-Si on Si epilayer system, besides being an interesting technological system in its own right, is a superb model for strained-layer studies. The point defect and symmetry defect structures associated with compound semiconductors can be avoided, allowing a focus on the mechanics of the system. Dislocation sources, glide behavior, and performance effects have been examined for strained-layer systems. Surprises have appeared along the way, but these materials are now becoming characterized well enough for industrial device applications.     

Characterization of solid state array cameras for the mid-IR

We present a characterization of some processes affecting the performance of solid state array cameras designed for ground based astronomical imaging in the 8–13μm atmospheric window. Our discussion includes a novel model for electron-hole generationrecombination noise based on the probable pathlength of an electron in a photoconductor. We use the Berkeley mid-IR Array Camera as an example. For this camera, the results show that the total optical system composed of the camera, a 3m telescope, and the atmosphere has an efficiency of about 3%, a 1σ noise equivalent flux density of 25 mJy min^?1/2arcsec^?2 measured over a Δλ/λ=10% band width, and a noise equivalent expressed as the ambient temperature thermal black body noise of 23%.     

Atmospheric Chemistry of 2-Ethyl Acrolein

The atmospheric oxidation of the unsaturated aldehyde 2-ethyl acrolein, CH₂=C(C₂H₅)CHO, has been studied in laboratory experiments involving the reaction of ozone with 2-ethyl acrolein in the dark (with cyclohexane added to scavenge the hydroxyl radical), and the sunlight irradiation of 2-ethyl acrolein with NO in air. The major carbonyl products of the 2-ethyl acrolein reaction with ozone are formaldehyde, acetaldehyde, and the dicarbonyl ethylglyoxal, CH₃CH₂COCHO. Sunlight irradiation of 2-ethyl acrolein and NO led to the formation of three carbonyls (formaldehyde, acetaldehyde, and ethylglyoxal) and three peroxyacyl nitrates, (RC(O)OONO₂), including PAN (R = CH₃), PPN (R = C₂H₅), and the unsaturated compound EPAN (R = CH₂=C(C₂H₅)). Mechanisms are outlined for the reactions of ozone and of the hydroxyl radical with 2-ethyl acrolein. These mechanisms are consistent with the observed carbonyl and peroxyacyl nitrate products. Thermal decomposition, a major atmospheric removal process for peroxyacyl nitrates, has been studied for EPAN. The decomposition rate of EPAN relative to that of PAN is 0.59–0.73 at 292–294 K and 1 atm of air. Atmospheric implications of these results are discussed.     

Activity of NiO in (Ni,Mg)O Solid Solutions

Disagreement exists in the literature concerting the activity of NiO in (Ni,Mg)O solid solutions. Ideal behavior, as well as strong positive deviations and strong negative deviations from ideality, has been reported. In the present study, the activity of NiO was determined by electromotive force measurements using the solid-state cell Pt/Ni-NiO/0.92ZrO₂-0.08Y₂O₃/Ni-(Ni,Mg)O/Pt. The compositions studied had NiO mole fractions of 0.1,0.3,0.5,0.7, and 0.9. In agreement with theoretical expectations, the solid solutions exhibited ideal behavior at 882° and 982°C. Possible reasons for the conflicting results in the literature arc presented.     

Influence of low-frequency electromagnetic fields on living organisms

Recent research reports appear to indicate a real possibility that the low-frequency electromagnetic field produced by the power transmission and distribution network presents a health problem. A critical assessment of the available information is presented here. The state of knowledge, available evidence and conflicting reports indicate a definite need for interim action by the power industry. New direction for analytical research, possible interim avoidance measures, proper advice to clients and the public are discussed. Detailed mathematical modeling for the linear and nonlinear dynamics of DNA and the chromosome as a whole is suggested.     

Mixing and solid-liquid mass-transfer rates in a creusot-loire uddeholm vessel: A water model case study

The process of mixing and solid-liquid mass transfer in a one-fifth scale water model of a 100-ton Creusot-Loire Uddeholm (CLU) converter was investigated. The modified Froude number was used to relate gas flow rates between the model and its protoype. The influences of gas flow rate between 0.010 and 0.018 m³/s and bath height from 0.50 to 0.70 m on mixing time were examined. The results indicated that mixing time decreased with increasing gas flow rate and increased with increasing bath height. The mixing time results were evaluated in terms of specific energy input and the following correlation was proposed for estimating mixing times in the model CLU converter: T _mix=1.08Q ^−1.05 W ^0.35, where Q (m³/s) is the gas flow rate and W (tons) is the model bath weight. Solid-liquid mass-transfer rates from benzoic acid specimens immersed in the gas-agitated liquid phase were assessed by a weight loss measurement technique. The calculated mass-transfer coefficients were highest at the bath surface reaching a value of 6.40 × 10⁻⁵ m/s in the sprout region. Mass-transfer coefficients and turbulence parameters decreased with depth, reaching minimum values at the bottom of the vessel.     

The impact of team and work characteristics on team functioning

In this article, the authors seek to strengthen the theoretical foundation of team and cell formation through the inclusion of human factors. They distinguish three types of team characteristics: global, shared, and compositional attributes. In this last category, they also deal with diversity in teams by addressing three types of variables: demographic characteristics, skills and knowledge, and personality traits. In addition, the authors address the relevance of the structure of diversity in cells. For each of the above‐mentioned groups of team characteristics, their potential impact on team functioning is worked out and discussed with simultaneous consideration of the characteristics of the team task. Three industrial examples are included to illustrate the importance of including worker, team, and work characteristics when designing manufacturing cells. © 2006 Wiley Periodicals, Inc. Hum Factors Man 16: 1–15, 2006.     

Tobacco craving predicts lapse to smoking among adolescent smokers in cessation treatment.

Previous research indicates that tobacco craving predicts relapse to smoking among adult smokers attempting to quit. We hypothesized a similar relationship between craving and lapse (any smoking following a period of abstinence) among adolescent smokers during the treatment phase of a clinical trial. A visit was considered a lapse visit if the participant reported smoking or had a carbon monoxide level of 7 ppm or greater subsequent to an abstinent visit. A total of 34 participants (mean age = 14.9 years [SD = 1.3]; mean cigarettes/day = 18.0 [SD = 7.6]; mean Fagerstr?m Test for Nicotine Dependence score = 6.8 [SD = 1.34]; 65% female), were included in the present analysis of 167 treatment visits. Logistic regression analyses showed a positive relationship between degree of craving, measured by the Questionnaire on Smoking Urges, and lapse during smoking cessation treatment (p = .013). Additionally, linear regression analyses demonstrated a strong positive association between cigarettes smoked per day and craving scores (p<.001). Taken together with other data, these findings suggest that degree of craving might influence tobacco abstinence for adolescent smokers. Thus monitoring and addressing craving appears useful to increase the success of adolescent smoking cessation.