Poly(vinylidene fluoride) with zinc oxide and carbon nanotubes applied to pressure sheath layers in oil and gas pipelines

In this work, PVDF composites containing 0.2% (m/m) of carbon nanotubes (MWCNTs), PVDF with 5.0% (m/m) of zinc oxide (ZnO), and composites containing both particles in the same contents in the matrix were melt processed in a mini-extruder machine with double screws, using the counter-rotation mode. Composites were characterized by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray diffraction (XRD), dynamic-mechanical analysis (DMA), and contact angle tests (CA). The samples presented the predominance of the α phase, with an increased degree of crystallinity as well as an increase in dimensional stability by incorporating both fillers, showing a synergistic effect between these particles, as shown on FTIR, DSC, and XRD results. SEM images showed a good dispersion of high aspect ratio particles. In general, DMA and TGA analysis showed that composites had not decreased their thermal and mechanical performance when compared to neat PVDF. Results of CA analysis showed an increase in the hydrophobicity of the sample containing MWCNTs. Permeability tests were also performed using a differential pressure system, combining high temperature and pressure, obtaining permeability measures and time lag. This work presents an alternative of composite materials, suggesting its application in the internal pressure sheath layers of oil and gas flexible pipes.     

Isolation and characterisation of pectic substances from murta (Ugni molinae Turcz) fruits

Cell walls polysaccharides from murta fruit (Ugni molinae Turcz), an endemic Chilean species with relevant food uses, were fractionated by water, ammonium oxalate, hot diluted HCl and cold diluted NaOH extractions. The polysaccharide fractions were analysed for monosaccharide composition and physicochemical properties. Pectic substances were found in all extracts, but mainly in the oxalate and acid soluble fractions, in which they appear as homogalacturonan polymers. Murta pectin was further extracted by hot diluted acid treatment using industrial conditions, yielding 30% by weight of dry fruit. The polymer showed similar composition and physicochemical properties to those of commercial citrus pectin, presenting a galacturonic acid content of 70.9% (w/w), a molecular weight of 597 kDa, and a methoxylation degree of 57%. The FT-IR spectrum of murta pectin suggests the presence of ferulic acid residues on its structure and the NMR analysis confirmed the structure of this polysaccharide. It is concluded that murta fruit can be considered as a valuable source of high quality pectin.     

Shaping the global oil peak: A review of the evidence on field sizes,reserve growth,decline rates and depletion rates

This review paper summarises and evaluates the evidence regarding four issues that are considered to be of critical importance for future global oil supply. These are: a) how regional and global oil resources are distributed between different sizes of field; b) why estimates of the recoverable resources from individual fields tend to grow over time and the current and likely future contribution of this to global reserve additions; c) how rapidly the production from different categories of field is declining and how this may be expected to change in the future; and d) how rapidly the remaining recoverable resources in a field or region can be produced. It is shown that, despite serious data limitations, the level of knowledge of each of these issues has improved considerably over the past decade. While the evidence on reserve growth appears relatively encouraging for future global oil supply, that on decline and depletion rates does not. Projections of future global oil supply that use assumptions inconsistent with this evidence base are likely to be in error.     

Reducing greenhouse gas emissions through operations and supply chain management

The experiences of the largest corporation in the world and those of a start-up company show how companies can profitably reduce greenhouse gas emissions in their supply chains. The operations management literature suggests additional opportunities to profitably reduce emissions in existing supply chains, and provides guidance for expanding the capacity of new “zero emission” supply chains. The potential for companies to profitably reduce emissions is substantial but (without effective climate policy) likely insufficient to avert dangerous climate change.     

Effect of chitosan coating in preventing deterioration and preserving the quality of fresh‐cut papaya ‘Maradol’

BACKGROUND: Chitosan can form antimicrobial, semi‐permeable barriers that limit gas exchange and reduces water loss in fruits. Consumer interest in fresh‐cut papaya fruit is leading to increasing demand because of its sensorial and antioxidant properties. However, papaya is a highly perishable product that is prone to loss of weight, loss of firmness and microbial attack. The aim of this study was to evaluate the effect of chitosan coatings on the overall quality of fresh‐cut papaya. Chitosan coatings of low (LMWC), medium (MMWC) and high (HMWC) molecular weights, at concentrations of 0.01 and 0.02 g mL^?1, were applied to fresh‐cut papaya cubes. The treated cubes were stored at 5 °C and changes in quality were evaluated. RESULTS: MMWC maintained the highest color values (L* and b*) and firmness. Chitosan coatings suppressed mesophilic plate count, and the growth of molds and yeast, compared to controls. The MMWC coatings at 0.02 g mL^?1 resulted in the highest antimicrobial activity and decreased the activity of the enzymes polygalacturonase and pectin methylesterase, followed by low and high MW chitosan coatings at 0.02 g mL^?1. CONCLUSION: The application of the MMWC treatment at 0.02 g mL^?1 could be used to reduce deteriorative processes, maintain quality and increase the shelf life of fresh‐cut papaya stored at 5 °C. Copyright © 2008 Society of Chemical Industry     

Antioxidant packaging development and optimization using agroindustrial wastes

The increasing use of non-biodegradable materials and the difficulty in recycling most of the available packaging have been pushing the development of biodegradable packaging. In this study, the potential uses of agroindustrial wastes to produce biodegradable films with antioxidant capacity were investigated. Starch films were produced by casting method using bran from jaboticaba peel, mango peel, and broccoli stalk. The influence of the concentration or type of bran in the properties of the films was evaluated through a central composite design. The results were analyzed by response surface and desirability function. Except for elongation and water solubility, the fitted equations were predictive in all studied properties. The films prepared from a higher concentration of mango peel exhibited better antioxidant capacity, while the broccoli stalk had no significant effect on antioxidant properties. The optimal formulation of the film (2.8% of jaboticaba peel and 20.0% of mango peel) and their predicted response variables (0.8 MPa for tensile strength, 40.0 MPa for Young's modulus, 4.5 mg/ml for IC₅₀, and 41.6% for inhibition percentage) were defined according to the results. The optimization was satisfactory and the film presented high antioxidant capacity and moderate mechanical properties, proving to be an alternative to replace plastic packaging.     

Water-repellent films from corn protein and tomato cutin

Flexible and hydrophobic biobased films were obtained using zein esterified with methanol and para-toluene (p-toluene) sulfonic acid, cutin from tomato peels and ethanol. Esterification was confirmed by proton nuclear magnetic resonance and attenuated total reflectance–Fourier transform infrared spectroscopy (ATR-FTIR). Non-modified zein films were brittle and hydrophilic. ATR-FTIR demonstrated that zein esterification increased zein hydrophobicity. Without cutin, esterified zein films were hydrophobic but brittle. Addition of cutin yielded films that were flexible and hydrophobic, as demonstrated by contact angle measurements. Principal component analysis (PCA) of ATR-FTIR data showed that intensities at 3195 cm⁻¹ and 3490 cm⁻¹ were correlated to the relative hydrophobicity of zein films. PCA also showed that films of esterified zein and cutin were more hydrophobic than their counterparts (non-modified zein without cutin). Optical and scanning electron microscopy demonstrated that esterified zein was compatible with cutin and yielded cohesive films, which did not fracture upon bending.     

Critical Review of the Evolution of Extracellular Vesicles’ Knowledge: From 1946 to Today

Extracellular vesicles (EVs) are a family of particles/vesicles present in blood and body fluids, composed of phospholipid bilayers that carry a variety of molecules that can mediate cell communication, modulating crucial cell processes such as homeostasis, induction/dampening of inflammation, and promotion of repair. Their existence, initially suspected in 1946 and confirmed in 1967, spurred a sharp increase in the number of scientific publications. Paradoxically, the increasing interest for EV content and function progressively reduced the relevance for a precise nomenclature in classifying EVs, therefore leading to a confusing scientific production. The aim of this review was to analyze the evolution of the progress in the knowledge and definition of EVs over the years, with an overview of the methodologies used for the identification of the vesicles, their cell of origin, and the detection of their cargo. The MISEV 2018 guidelines for the proper recognition nomenclature and ways to study EVs are summarized. The review finishes with a “more questions than answers” chapter, in which some of the problems we still face to fully understand the EV function and potential as a diagnostic and therapeutic tool are analyzed.     

1,2,4-Oxadiazole Topsentin Analogs with Antiproliferative Activity against Pancreatic Cancer Cells,Targeting GSK3β Kinase

A new series of topsentin analogs, in which the central imidazole ring of the natural lead was replaced by a 1,2,4-oxadiazole moiety, was efficiently synthesized. All derivatives were pre-screened for antiproliferative activity against the National Cancer Institute (NCI-60) cell lines panel. The five most potent compounds were further investigated in various pancreatic ductal adenocarcinoma (PDAC) cell lines, including SUIT-2, Capan-1, and Panc-1 cells, eliciting EC₅₀ values in the micromolar and sub-micromolar range, associated with significant reduction of cell migration. These remarkable results might be explained by the effects of these new topsentin analogues on epithelial-to-mesenchymal transition markers, including SNAIL-1/2 and metalloproteinase-9. Moreover, flow cytometric analysis after Annexin V-FITC and propidium iodide staining demonstrated that these derivatives enhanced apoptosis of PDAC cells. Keeping with these data, the PathScan intracellular signaling and ELISA array revealed cleavage of caspase-3 and PARP and a significant inhibition of GSK3β phosphorylation, suggesting this kinase as a potential downstream target of our novel compounds. This was further supported by a specific assay for the evaluation of GSK3β activity, showing IC₅₀ values for the most active compounds against this enzyme in the micromolar range.