Office workers perform tasks using different information and communication technologies (ICT) involving various postures. Adequate variation in postures and muscle activity is generally believed to protect against musculoskeletal complaints, but insufficient information exists regarding the effect on postural variation of using different ICT. Thus, this study among office workers aimed to determine and compare postures and postural variation associated with using distinct types of ICT. Upper arm, head and trunk postures of 24 office workers were measured with the Physiometer® over a whole day in their natural work and away-from-work environments. Postural variation was quantified using two indices: APDF(90-10) and EVA(sd). Various ICT had different postural means and variation. Paper-based tasks had more non-neutral, yet also more variable postures. Electronics-based tasks had more neutral postures, with less postural variability. Tasks simultaneously using paper- and electronics-based ICT had least neutral and least variable postures. Tasks without ICT usually had the most posture variability. Interspersing tasks involving different ICT could increase overall exposure variation among office workers and may thus contribute to musculoskeletal risk reduction. 相似文献
We present the first polynomial-time approximation schemes (PTASes) for the following subset-connectivity problems in edge-weighted graphs of bounded-genus: Steiner tree, low-connectivity survivable-network design, and subset TSP. The schemes run in $\mathcal{O}(n \log n)$ time for graphs embedded on both orientable and nonorientable surfaces. This work generalizes the PTAS framework from planar graphs to bounded-genus graphs: any problem that is shown to be approximable by the planar PTAS framework of Borradaile et al. (ACM Trans. Algorithms 5(3), 2009) will also be approximable in bounded-genus graphs by our extension. 相似文献
In this investigation, a comparative study for a NOX storage catalytic system was performed focusing on the parameters that affect the reduction by using different reductants (H2, CO, C3H6 and C3H8) and different temperatures (350, 250 and 150 °C), for a Pt/BaO/Al2O3 catalyst. Transient experiments show that H2 and CO are highly efficient reductants compared to C3H6 which is somewhat less efficient. H2 shows a significant reduction effect at relatively low temperature (150 °C) but with a low storage capacity. We find that C3H8 does not show any NOX reduction ability for NOX stored in Pt/BaO/Al2O3 at any of the temperatures. The formation of ammonia and nitrous oxide is also discussed.
Image calibration requires both linearization of pixel values and scaling so that values in the image correspond to real‐world luminances. In this paper we focus on the latter and rather than rely on camera characterization, we calibrate images by analysing their content and metadata, obviating the need for expensive measuring devices or modeling of lens and camera combinations. Our analysis correlates sky pixel values to luminances that would be expected based on geographical metadata. Combined with high dynamic range (HDR) imaging, which gives us linear pixel data, our algorithm allows us to find absolute luminance values for each pixel—effectively turning digital cameras into absolute light meters. To validate our algorithm we have collected and annotated a calibrated set of HDR images and compared our estimation with several other approaches, showing that our approach is able to more accurately recover absolute luminance. We discuss various applications and demonstrate the utility of our method in the context of calibrated color appearance reproduction and lighting design. 相似文献
Dynamically adaptive systems (DAS) must cope with system and environmental conditions that may not have been fully understood or anticipated during development. RELAX is a fuzzy logic-based specification language for identifying and assessing sources of environmental uncertainty, thereby making DAS requirements more tolerant of unanticipated conditions. This paper presents AutoRELAX, an approach that automatically generates RELAXed goal models to address environmental uncertainty. Specifically, AutoRELAX identifies goals to RELAX, which RELAX operators to apply, and the shape of the fuzzy logic function that establishes the goal satisfaction criteria. AutoRELAX generates different solutions by making tradeoffs between minimizing the number of RELAXed goals and maximizing delivered functionality by reducing the number of adaptations triggered by minor and adverse environmental conditions. In a recent extension, AutoRELAX uses a stepwise adaptation of weights to balance these two competing concerns and thereby further improve the utility of AutoRELAX. We apply it to two industry-based applications involving network management and a robotic controller, respectively. 相似文献
This paper presents a gradient based topology optimization method for Discrete Material and Thickness Optimization of laminated composite structures, labelled the DMTO method. The capabilities of the proposed method are demonstrated on mass minimization, subject to constraints on the structural criteria; buckling load factors, eigenfrequencies, and limited displacements. Furthermore, common design guidelines or rules, referred to as manufacturing constraints, are included explicitly in the optimization problem as series of linear inequalities. The material selection and thickness variation are optimized simultaneously through interpolation functions with penalization. Numerical results for several parameterizations of a finite element model of a generic main spar from a wind turbine blade are presented. The different parameterizations represent different levels of complexity with respect to manufacturability. The results will thus give insight into the relation between potential weight saving and design complexity. The results show that the DMTO method is capable of solving the problems robustly with only few intermediate valued design variables. 相似文献
CMC samples obtained by gel filtration on a preparative scale were used to calibrate an agarose column. The relation between molecular weight and the peak elution volume for monodisperse samples were calculated as well as the relation between band broadening and the peak elution volume. In the calculations of the molecular weight distribution curves of the studied CMC samples, consideration was given to the variable band broadening by proper transformations of the experimental data, thus making it possible to obtain numerical solutions free from oscillations. The method admits a rapid determination of the molecular weight distribution of cellulose and related materials. 相似文献
Phosphocholine (PC) zwitterionic surfactants, with different hydrocarbon chain lengths (C6C6PC to C9C9PC), were absorbed on the surface of silicon nitride near the isoelectric point (pH 6). Adsorption of the surfactants changed the lateral and normal surface forces, the rheology, and the consolidation behavior of the particles. The normal force between two silicon nitride surfaces as a function of separation and the lateral (friction) forces were measured using an atomic force microscope (AFM). These measurements indicated that surfactant adsorption reduced the magnitude of the long-range attractive van der Waals force and produced a repulsive short-range force. Although the adsorbed layers provided a barrier to particle contact, they could be ejected with a critical force that increased with the hydrocarbon chain length. The effect of an adsorbed layer on the viscosity and consolidation of slurries was also measured. The viscosity of all slurries decreased with increasing shear rate, indicative of attractive particle networks. The highest viscosity was observed for slurries formulated at the isoelectric point without added surfactant. Much lower viscosities were observed when the surfactant concentration was greater than the critical micelle concentration (cmc). A relative density of 0.46 was obtained via pressure filtration at 4 MPa without a surfactant, and between 0.46 to 0.59 (C6C6PC to C9C9PC, respectively) for surfactant concentrations greater than the cmc. Comparing force measurements with rheology and packing density provides a basis for discussing the role of interparticle forces in ceramic powder processing via colloidal routes. 相似文献
Two different methods are used to coat silicon nitride particles with an alumina precursor to make Si3N4 behave like Al2O3 in aqueous slurries. The first method involves the precipitation of an aluminum hydroxycarbonate from dissolved Al(NO3)3 during the decomposition of urea. In the second method, dry silicon nitride powder is reacted with aluminum tri- sec -butoxide in hexane at room temperature. Both methods produce a coated powder in which the electrophoretic and rheological properties of aqueous slurries mimic those of alumina. When salt is added to slurries consisting of coated Si3N4 powder, all rheological evidence suggests the presence of a short-range repulsive potential that produces a weakly attractive particle network similar to that previously reported for Al2O3 powder. Although electrophoretic and rheological data showed that the coated powder behaved like Al2O3, consolidation data indicated that slurries of coated powder with added salt did not pack to high density. In addition, these bodies were not plastic as found for bodies consolidated from dispersed and salt-added Al2O3 slurries. 相似文献
3,7-Dimethyl-2-undecanol, 3,7,9-trimethyl-2-tridecanol, and 3,7, 11-trimethyl-2-tridecanol were synthesized as racemic mixtures in moderate yields. The alcohols are known precursors of the female sex pheromones of the pine sawfly species Diprion nipponica, Macrodiprion nemoralis, and Microdiprion pallipes, respectively. Stereoisomeric mixtures of 3,8,12-trimethyl-2-tridecanol, erythro-(2R,3R,11R/S)-3,11-dimethyl-2-tetradecanol, 3,5-dimethyl-2-tetradecanol, and 5,7-dimethyl-2-tetradecanol, structurally related to sex pheromone alcohol precursors of pine sawfly species, were also synthesized in moderate yields. The key reaction in the syntheses was the ring opening of -butyrolactones by using different alkyl lithiums as nucleophiles. 相似文献