Effects of a single dose of N-Acetyl-5-methoxytryptamine (Melatonin) and resistance exercise on the growth hormone/IGF-1 axis in young males and females

Melatonin and resistance exercise alone have been shown to increase the levels of growth hormone (GH). The purpose of this study was to determine the effects of ingestion of a single dose of melatonin and heavy resistance exercise on serum GH, somatostatin (SST), and other hormones of the GH/insulin-like growth factor 1 (IGF-1) axis. Physically active males (n = 30) and females (n = 30) were randomly assigned to ingest either a melatonin supplement at 0.5 mg or 5.0 mg, or 1.0 mg of dextrose placebo. After a baseline blood sample, participants ingested the supplement and underwent blood sampling every 15 min for 60 min, at which point they underwent a single bout of resistance exercise with the leg press for 7 sets of 7 reps at 85% 1-RM. After exercise, participants provided additional blood samples every 15 min for a total of 120 min. Serum free GH, SST, IGF-1, IGFBP-1, and IGFBP-3 were determined with ELISA. Data were evaluated as the peak pre- and post-exercise values subtracted from baseline and the delta values analyzed with separate three-way ANOVA (p < 0.05). In males, when compared to placebo, 5.0 mg melatonin caused GH to increase (p = 0.017) and SST to decrease prior to exercise (p = 0.031), whereas both 0.5 and 5.0 mg melatonin were greater than placebo after exercise (p = 0.045) and less than placebo for SST. No significant differences occurred for IGF-1; however, males were shown to have higher levels of IGFBP-1 independent of supplementation (p = 0.004). The 5.0 mg melatonin dose resulted in higher IGFBP-3 in males (p = 0.017). In conclusion, for males 5.0 mg melatonin appears to increase serum GH while concomitantly lowering SST levels; however, when combined with resistance exercise both melatonin doses positively impacts GH levels in a manner not entirely dependent on SST.     

THROO: a Tracked Hybrid Rover to Overpass Obstacles

In this paper, the design, simulation and experimental tests are presented for THROO: a Tracked Hybrid Rover, which has been developed to Overpass Obstacles. The proposed mobile robot has 3-DOFs and it is capable of straight motion, turning ability and two operations, namely rover-like motion with tracks on flat terrain and walking-like motion with track and legs to overpass obstacles to move on uneven terrain. The leg mechanism is composed of a four-bar linkage, which has been synthesized according to the desired features. In particular, the Burmester problem, which aims at finding the geometric parameters of a four-bar linkage required for a prescribed set of finitely separated poses are solved for the case understudy. Dynamic simulations have been carried out and a prototype has been built. The proposed results show the hybrid rover ability to overpass obstacles, for which size is comparable or greater than the track high.     

Modification of porous copolymers network based on acrylonitrile

Summary The preparation of a chelating ion-exchange network based on acrylonitrile was carried out by chemical modification with hydroxylamine. The beads of resin were synthesized by aqueous suspension copolymerization of acrylonitrile (AN), styrene (STY) and divinylbenzene (DVB). The influence of diluent used in the suspension polymerization on the structure of the resulting copolymers was evaluated. The diluents employed were heptane (HEP), toluene (TOL) and anisole (ANI). It was found that the AN incorporation into copolymer structure was dependent on the diluent used. Conversion of nitrile groups into the amidoxime was conducted by treatment with hydroxylamine under alkaline solution. The resins were characterized by apparent density, surface area, average pore diameter, elemental analysis (CHN), FTIR and optical microscopy. Based on the results obtained, it was possible to control the porosity by diluent employed in the synthesis and to modify chemically a resin containing nitrile groups by hydroxylamine reaction. Received: 6 October 2001/Revised version: 2 April 2002/ Accepted: 11 April 2002     

Analysis of the Insect OS-D-Like Gene Family

Insect OS-D-like proteins, also known as chemosensory (CSP) or sensory appendage proteins (SAP), are broadly expressed in various insect tissues, where they are thought to bind short to medium chain length fatty acids and their derivatives. Although their specific function remains uncertain, OS-D-like members have been isolated from sensory organs (including the sensillum lymph in some cases), and a role in olfaction similar to that of the insect odorant binding proteins (OBP) has been suggested for some. We have identified 15 new OS-D-like sequences: four from cDNA clones described herein and 11 from sequence databases. The os-d-like genes from the Anopheles gambiae, Apis mellifera, Drosophila melanogaster, and Drosophila pseudoobscura genomes typically have single, small introns with a conserved splice site. Together with all family members entered on GenBank, a total of 70 OS-D-like proteins, representing the insect orders Diptera, Dictyoptera, Hymenoptera, Lepidoptera, Orthoptera, and Phasmatodea, were analyzed. A neighbor joining distance phenogram identified several protein similarity classes that were characterized by highly conserved sequence motifs, including (A) N-terminal YTTKYDN(V/I)(N/D)(L/V)DEIL, (B) central DGKELKXX(I/L)PDAL, and (C) C-terminal KYDP. In contrast, three similarity classes were characterized by their diversion from these conserved motifs. The functional importance of conserved amino acid residues is discussed in relation to the crystal and NMR structures of MbraCSPA6.     

Obesity: Prevalence,Theories, Medical Consequences,Management, and Research Directions

Obesity and its associated disorders are a growing epidemic across the world. Many genetic, physiological, and behavioral factors play a role in the etiology of obesity. Diet and exercise are known to play a valuable role in the treatment and prevention of obesity and associated disorders such as hypertension, heart disease, and diabetes. Therefore, the purpose of this review is to examine the prevalence, etiology, consequences, and treatment of obesity.     

Untersuchung des Passivierungsmechanismus von Eisen in Phosphatelektrolyten an erosiv beanspruchten Oberflächen

Investigation into the passivation mechanism of iron in phosphate electrolytes on surfaces exposed to erosive attack On iron electrodes in neutral phosphate electrolytes by continuous solid particle impingement a reaction layer is formed within the transition potential region under anodic polarization. XPS and AES investigations show that the reaction layer formed under impingement will be replaced by an oxide layer during the transition into the passive state under simultaneous decrease of the layer thickness. The active/passive transition in phosphate electrolytes may be attached to the equilibrium potential of the reaction . According to this thermodynamic interpretation of both the active/passive transition and the passive/active transition, respectively on iron in presence of phosphate ions may be described as the Fe(II)/Fe(III)-redox reaction with two solid phases, the iron(II)-phosphate phase and the iron(III)-oxide phase. The increase of the interfacial dynamic processes at the solid/liquid interface causes in consequence of the solid particle impingement that thermodynamic laws govern the course of reactions.     

Two CEGAR-based approaches for the safety verification of PLC-controlled plants

In this paper we address the safety analysis of chemical plants controlled by programmable logic controllers (PLCs). We consider a specification of the control program of the PLCs, extended with the specification of the dynamic plant behavior. The resulting hybrid models can be transformed to hybrid automata, for which advanced techniques for reachability analysis exist. However, the hybrid automata models are often too large to be analyzed. We propose two counterexample-guided abstraction refinement (CEGAR) approaches to keep the size of the hybrid models moderate.     

Impact of arteriovenous fistula cannulation on the quality of dialysis

Introduction: Adequate hemodialysis directly improves health. Puncturing an arteriovenous fistula (AVF) and the amount of blood recirculation greatly affect the quality of dialysis. Few studies have assessed the method to cannulate a fistula and its influence on efficiency of hemodialysis. Methods: This prospective pilot study included 14 patients with end‐stage renal failure receiving regular intermittent hemodialysis. Patients received three consecutive treatments with both needles directed upstream then three consecutive treatments with the venous needle directed upstream and the arterial needle directed downstream. With both techniques, the distance between the needles was kept constant at 2.5 cm. Recirculation rate and Kt/V ratio were measured during each treatment using thermodilution and a diascan Fresenius generator. Findings: The 14 patients received 84 hemodialysis sessions: i.e., 8 (57.1%) males and 6 (42.8%) females, mean age 62.3 ± 15.57 years. Results showed that mean recirculation rates and Kt/V did not significantly differ between the two techniques. Discussion: Because no significant difference was found between the two techniques, the direction of insertion of needles should be decided upon on a case‐by‐case basis depending on the anatomy of the AVF and the feasibility of the puncture.     

Cyclic Nanoindentation for Local High Cycle Fatigue Investigations: A Methodological Approach Accounting for Thermal Drift

Cyclic nanoindentation allows characterizing the influence of single phases and their interactions on fatigue mechanisms. Herein, a method for high cycle fatigue testing by nanoindentation is presented. By combining high- and low-frequency indentation modes, high cycle numbers are achieved while obtaining sufficient data points to reconstruct force–displacement hysteresis loops. A challenge is the stochastic course of thermal drift which is addressed by measuring drift rate in regular low-force holding segments. Drift rates are used to correct the displacement values, yielding reproducible cyclic deformation data as it is shown for two very different materials, a ductile metal and a brittle ceramic.     

How Does Negative Life Change Following Disaster Response Impact Distress Among Red Cross Responders?

The American Red Cross is the largest nongovernmental organization responding to disasters in the United States. This study investigated the impact of negative life change occurring in the year following the September 11, 2001, terrorist attacks on levels of distress among 757 Red Cross Disaster Services Human Resources (national disaster team) employees and volunteers who responded to this disaster. Negative life change in the year following disaster response fully mediated the relationship between disaster response and symptoms of depression and partially mediated the responses between disaster response and posttraumatic stress and anxiety symptoms. Results highlight the importance of life experiences in the year following disaster response and, therefore, the education and follow-up services provided to disaster workers prior to and following disaster assignment. Suggestions for monitoring disaster-related stress during and following assignment are provided. (PsycINFO Database Record (c) 2010 APA, all rights reserved)