DYRE: a DYnamic REconfigurable solution to increase GPGPU’s reliability

The Journal of Supercomputing - General-purpose graphics processing units (GPGPUs) are extensively used in high-performance computing. However, it is well known that these devices’...     

Effect of Aluminum Content on the Dynamic Recrystallization of Fe18MnxAl0.74C Steels During Hot-Forging Treatments

Metallurgical and Materials Transactions A - In the present work, the dynamic recrystallization and microstructural evolution of the family of advanced high-strength steels Fe18MnxAl0.74C are...     

Numerical characterization and experimental verification of an in-plane MEMS-actuator with thin-film aluminum heater

In this paper, a novel concept of a thermo-mechanical MEMS actuator using aluminum thin-film heaters on a thermal oxide for electrical insulation is presented. The actuator is part of an universal tensile testing platform for thermo-mechanical material characterization of one dimensional materials on a micro- and nano-scopic scale under different environmental conditions, as varying temperatures, pressure, moisture or even vacuum and is realised in BDRIE technology. It is shown, that the actuator concept fulfills the requirements for the use in a tensile loading stage along with heterogeneously integrated nanofunctional elements, following a specimen centered approach in line with bottom-up self-assembly processes. Simulation and experiment agree very well in the thermal and mechanical domain and allow subsequent optimisation of the actuator performance.     

Catalyzing the curing reaction of a new benzoxazine-based phenolic resin

The effect of potential catalysts on the curing reaction of a new type of phenolic resins obtained from benzoxazine precursors is studied. These novel resins solve the shortcomings of traditional phenolics because they cure by a ring-opening mechanism that avoids the release of volatiles. Isothermal and nonisothermal differential scanning calorimetry (DSC) data is used to determine the influence of the catalysts on the curing kinetics. Fourier transform infrared (FTIR) spectroscopy is also applied. The benzoxazine chosen for this study is a purified benzoxazine monomer based on bisphenol-A, formaldehyde, and aniline. The as-synthesized benzoxazine precursor is also studied to determine the influence of the dimers and higher oligomers in the curing mechanism. The presence of these structures seems to catalyze the curing reactions. The activation energy and overall reaction order of the as-synthesized precursor are determined. Among the catalysts tested, adipic acid shows the most promising results. For all the cases studied the curing reaction is autocatalyzed up to a diffusion-controlled stage. © 1995 John Wiley & Sons, Inc.     

Second-law efficiency analysis of a coal gasification process

The present paper summarizes a comprehensive Second-Law analysis of the SYNTHANE process of coal gasification⁽¹⁾, based on the available-energy concept as applied to design conditions and data. The analysis yields an overall process efficiency of 46%. For every 100 MJ of useful energy supplied with coal, 51 MJ are consumed during the various unit operations while effluents carry 3 MJ. Unit 30, Steam and Power Production, consumes nearly 20 MJ; Unit 15, Gasification, used up nearly 16 MJ; Units 12 and 14, Coal Preparation and Feeding, about 5 MJ; Units 16 and 17, Raw Gas Quenching and Shift Conversion, 4 MJ; Unit 32, Oxygen Plant, approximately 2 MJ; other miscellaneous units contribute a combined available-energy destruction of 4 MJ. The Second-Law analysis unveils the inefficiencies present in the process and their sources, thus pinpointing the opportunities for improvement in the SYNTHANE process.     

Biosynthesis of fatty acids byTrypanosoma cruzi

The incorporation of [1-¹⁴C] acetate into fatty acids by cultured epimastigotes ofTrypanosoma cruzi was studied. After 8, 24, and 48 hr incubation with labeled precursor, up to 2.8% of the initial radioactivity added to the medium was found in theT. cruzi long chain fatty acids. Saturated (16∶0 and 18∶0), monounsaturated (18∶1ω9), and diunsaturated (18∶2ω6) fatty acids were synthesized. Both the pattern of incorporation of labeled acetate into the fatty acids and the decarboxylation ratios found suggest that de novo synthesis of fatty acids has taken place.     

Preparation of silica by acid dissolution of sepiolite and study of its reinforcing effect in elastomers

The preparation of amorphous silica by acid treatment of a natural magnesium silicate and its use as reinforcing filler for NR and SBR compounds are studied. Limited to the treatment with nitric acid, the rate constants at different temperatures and acid concentrations and the activation energy are calculated, as a function of percentage of extracted magnesium. The resulting material is basically an amorphous silica (92.5% SiO₂), as shown by X-ray analysis, that keeps the fibrous morphology of the original mineral. According to a preliminary technological study the resulting silica is a suitable reinforcing filler for general purpose rubbers; a comparison between the experimental results and those obtained with a commercial fine particle precipitated silica was made. Using a SBR compound the effect of silane coupling agents on the new silica was studied.     

Structural design using multi-objective metaheuristics. Comparative study and application to a real-world problem

Many structural design problems in the field of civil engineering are naturally multi-criteria, i.e., they have several conflicting objectives that have to be optimized simultaneously. An example is when we aim to reduce the weight of a structure while enhancing its robustness. There is no a single solution to these types of problems, but rather a set of designs representing trade-offs among the conflicting objectives. This paper focuses on the application of multi-objective metaheuristics to solve two variants of a real-world structural design problem. The goal is to compare a representative set of state-of-the-art multi-objective metaheuristic algorithms aiming to provide civil engineers with hints as to what optimization techniques to use when facing similar problems as those selected in the study presented in this paper. Accordingly, our study reveals that MOCell, a cellular genetic algorithm, provides the best overall performance, while NSGA-II, the de facto standard multi-objective metaheuristic technique, also demonstrates a competitive behavior.     

Benders decomposition for the uncapacitated multiple allocation hub location problem

In telecommunication and transportation systems, the uncapacitated multiple allocation hub location problem (UMAHLP) arises when we must flow commodities or information between several origin–destination pairs. Instead of establishing a direct node to node connection from an origin to its destination, the flows are concentrated with others at facilities called hubs. These flows are transported on links established between hubs, being then splitted and delivered to its final destination. Systems with this sort of topology are named hub-and-spoke (HS) systems or hub-and-spoke networks. They are designed to exploit the scale economies attainable through the shared use of high capacity links between hubs. Therefore, the problem is to find the least expensive HS network, selecting hubs and assigning traffic to them, given the demands between each origin–destination pair and the respective transportation costs. In the present paper, we present efficient Benders decomposition algorithms based on a well known formulation to tackle the UMAHLP. We have been able to solve some large instances, considered ‘out of reach’ of other exact methods in reasonable time.